Fiberglass stitched mat is made from chopped fiberglass strands or woven roving which is cut into a certain length and randomly dispersed , laid on a roving matrix then stitched together with organic fibers. Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, rtm, filament winding and hand lay-up processed. Such as pultruded parts, pipes, storage tanks, wind generator blades and other frp products. Product properties: 1. Even thickness, high wet tensile strength retention 2. Directional properties and strengths same to woven roving 3.Enough hollows on surface to make it good permeability 4. Flexibility to design variety weaving structures 5. Stable structure required to achieve maximum tensile strength properties. Shrink film packing and sealing and then package them with carton.
Alkali-resistant Fiberglass Mesh is mainly used for EPS board(exterior insulation system of external walls),this products uses the machine-woven material of moderate-alkali or non alkali as material and treats with alkali-resistant coating. The strength and alkali-resistance of the products are very good,and it plays an important role in insulation system,it is mainly used to prevent crack.Because of its good resistance of chemical corrosion such as acid-resistant ans alkali-resistant and high strength of longitude and latitude,it can distribute the stress on the insulation system of external walls,avoid deformation of the insulation system caused by external impact and pressure ,and improve the impact-resistance of the insulation. Besides,ití»s easy to install and quality control,it acts as the "soft steel barin " the insulation system. Ordinary Specification : 1.Mesh Size:4mm*4mm,5mm*5mm; 2.Weight/m2:65g-300g; 3.Length/roll:50m,100m; 4.Width:1m,2m; 5.Color:White(standard,blue,green, or other colors; 6.Packing:Each roll packed into shrink-wrapping plastic bag,then put into carton. 7.Special specification and package can be ordered and produced according to customers requirement. Shrink film packing,then in carton.
Fiberglass chopped strands Chopped Strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins,such as polyester and phenol resin.Thermoplastics are used a wide range of industries,including the automotive,electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic PA, PBT,PET,PP,ABS,AS,etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry,household products,pump casing,anticorrosion chemistry and exercise equipments. Yixing Product Characteristics: 1.Brand name:Yixing Fiberglass chopped strands 2.Model number:yxcs8001 3.Filament diameter: 13um etc 4.Chopped length: 3mm,4.5mm,6mm,12mm,18mm etc We can produce some customized products with special requirement according to your demand 5.Excellent clustering property,few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin,no fiber out product surface,good surface quality 8.Good strand integrity,low static,low fuzz,excellent mold flow ability 9.Quick wet-out by resin,excellent technical&mechanical properties 10.Water ratio:
Fiberglass chopped strands Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin.Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic pa, pbt, pet, pp, abs, as, etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry, household products, pump casing, anticorrosion chemistry and exercise equipments. Yixing product characteristics: 1.Brand name:yixing fiberglass chopped strands 3.Filament diameter: 13um etc 4.Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm etc we can produce some customized products with special requirement according to Your demand 5.Excellent clustering property, few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin, no fiber out product surface, good surface quality 8.Good strand integrity, low static, low fuzz, excellent mold flow ability 9.Quick wet-out by resin, excellent technical&mechanical properties 10.Water ratio:
Characteristic of products: composite by styrene-acrylic emulsion, the products has generous texture, firmly node, suitabale flexibility as well as acid alkali resistant and anti aging. 4*4, 100g/m2, shrink wrapping bag packing, then in carton.
300/450/600/225 gsm powder/emulsion binder Woven roving 400/600/800gsm Direct roving 1200/2400/4800tex Fiberglass mesh Chopped strands for smc/bmc 3/4/6/12mm. According to customer requriement
E-glass chopped strand mat We are the manufacturer and exporter specialized in e-glass chopped strand mat in china, the capacity is about 6500mt per year, the normally specifications are 300g/m2, 450g/m2, 600g/m2 and the width is 1000mm, 1040mm, 1250mm, 1270mm, 2540mm ect, powder or emulsion bind! quality products, competitive price and fast shipping, we sincerely wish we can have the chance to cooperate in near futurer. 30kg/roll, 300gsm, 1040mm*76ooomm
Fiberglass chopped strand mat With the characteristics of non-directional and even distribution, high mechanical kinetics. With fine plating and fitting for complex shapes of moulders. Well-soaked with resin, cutting freely, working simply. With high strength of absorbing resin, smooth appearance. Specification Package First sealed with pvc film, then packed in the cardboard box. Standard weight: 250g/¼o, 300 g/¼o, 380 g/¼o, net weight 30kg per box.. Standard weight: 450 g/¼o, 600 g/¼o, net weight 35kg per box.
300g fiberglass mat/ chopped strand mat/ csm/ sheet/ felt 1.Introduction E-glass chopped strand mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It is compatible with unsaturated polyester, vinylit, epoxy resins. The roll width ranges from 50mm to 2080mm. Special requirements may be available upon request. 2.Usage It is used for processing and manufacturing frp products with getting through hand lay up process, filament winding process and press molding. Typical products is including bathroom accessories, pipe, building material, automobile, furniture, vessel, cooling towers and other frp products 3.Packing Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets. 4.Parameter Density(g/m2Moisture content (%Loss on ignition (%Binder typeWidth (mm) 2250.22.1-6.3Powder/ emulsion1040 1270 2080 2500.22.1-6.3Powder/ emulsion1040 1270 2080 3000.22.1-6.3Powder/ emulsion1040 1270 2080 4500.22.1-6.3Powder/ emulsion1040 1270 2080 6000.22.1-6.3Powder/ emulsion1040 1270 2080
