Suitable for products that want to be lightweight and to enhance the rigidity and hardness.
materials: 100% carbon fiber, 100% glass fiber, carbon fiber+ glass fiber or other materials.
length x width:350x150mm¡b500x380mm¡b500x500mm¡b600x500mm¡b1000x600mm or other dimensions that is less than 1000x1000mm.
thickness: 0.25~10mm(+/-0.1mm)
appearance: glossy, general, matt
application: remote control model helicopter, remote control model car, bicycle accessories, license plates, frames and so on.
Carbon fiber fabric
It is made of carbon fiber by woven unidirectional, plain weaving or twill weaving style. The carbon fiber is high strength-to-weight and stiffness-to-weight ratios, and carbon fabric is thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fabric composites can achieve the strength and stiffness of metals at significant weight savings. Carbon fabrics are compatible with various resin systems including epoxy, polyester and vinyl ester resins. It is widely used as the basic material for aerospace, defence, leisure, automotive products, industry and the medical sector as well as other applications includes building construction repair and strengthening.
General Data
Weaving Style: Unidirectional, Plain, Twill
Input Available: 3k, 6k, 12k Carbon fiber
Weight: 15 0 ~ 600g / m2
Roll length: To be specified
Remark :
1. The above parameters are only in common condition. In case of order, the parameters are subject to the customer's confirmation.
2. CWP : Carbon plain weave fabric
3. CWT : Carbon twill weave fabric
4. CWU : Carbon woven unidirectional fabric
Packaging
Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets.
Storage
It is recommended that the carbon fiber fabric are stored in a cool and dry environment. Recommended temperature range of storage is between 10 ~ 30 degree and relative humidity between 50 ~ 75%.
The carbon fiber fabric should remain in the packaging until just prior to use.
Typical Range
Product Code Density (g/m2) Input Tex Fabric Count (ends/10cm ) Tensile Strength(Mpa) Tensile Modulus(Gpa)
Warp Weft Warp Weft
CWP200 200 3k 3k 50 50
CWT200 200 3k 3k 50 50
CWU200 200 12k Y 3500 Y 230
CWU300 300 12k Y 3500 Y 230
Carbon aramid fiber hybrid fabric
Hybrid Fabrics are woven by more than two kinds of different fiber materials (Carbon fiber, Aramid fiber, Fiberglass and other composite materials), which have the great performance of composite materials in impact strength, rigidity and tensile strength.
It is extensive applications, such as automotive engineering, motor sports, the fashionable decorations, aircraft construction, ship construction, sports equipments, electronic products and other applications. ,
Packing, are rolled around a mandrel paper roller. The rolled products are wrapped in plastic bags and put into cardboard boxes.
Low dielectric loss glass fiber
Low dielectric names D glass fiber, have D3, Dk series. It is low density, low dielectric constant and low dielectric loss. It is an ideal reinforcement for making light weight and high performance radomes with high wave permeability and wide frequency band and print circuit board etc...
Specifications D glass fiber
Items,D3,Dk
Density g/cm3,2.30,2.30
Strength of virgin filament Mpa,2600,2600
Elastic modulus GPa,55,55
Dielectric constant 2210,10HZ,4.5,5.0
Dielectric loss 2210,10HZ,0.0035,0.0035
D glass fiber fabric
Specification,D3,Dk
Thickness mm,0.22,0.22
Weight g/m2,210,210
Breaking strength N/100*25,Warp,1350,1450
,Weft fill,1000,1050
Fiberglass 3D fabric
3D fabric is woven out of 100% E-glass fiber, as well as carbon fiber, aramid fiber and other high performance fibers. Its structure consists of two decklayers formed by warp and weft direction fiber and Z direction fiber which interconnect both decklayers. The typical structure of vertical piles can be recognized by the 8-shaped piles in warp direction. Other shapes of vertical piles, such as I-shape and V-shape, can be realized too. The thickness between two decklayers (Z direction) can be designed from 2mm to 40mm in order to meet different needs. It is good impact resistance, and widely used in railway industry, shipbuilding, aviation, spaceflight, wind energy, construction, double-deck storage tank etc..
Type 3,5,8,10,12,15,18,20
Core t5hickness,Normal N,mm,3.0,5.0,8.0,10.0,12.0,15.0,18.0,20.0
Decklayer thickness,Normal N,mm,0.36,0.36,0.36,0.58,0.58,0.58,0.58,0.58
Fabric weight,Normal N,g/m2,720,810,920,1440,1510,1580,1720,1880
Laminate weight,Polyester resin N,g/m2,1510,1680,1900,2930,3060,3250,3440,3570
Fiberglass wool/ needle mat/ rock wool/ glass wool/ felt/ blankets/ sheet
1. Producing
Fiberglass wool is made from fiberglass strands chopped to cut in fixing length, and then after dealing with devillicate, fluffing, needling to make to end product. It is ceaselessly sewn by thousands of stitched.
2. Feature
Long time operating temperature: 650°c
Thermal coefficient: room temperature 0.035w/ m*k
Hygroscopicity: 5%
Density: 110-180kg/ m3
3.Usage
It is widely used for conductex, iron, non-ferrous metal, chemical, burning industry etc, especially industry filter material in domestic. It is used in car internal decorate, sound absorption, heat insulation, damping, antiflaming, geotextile and insulation materials.
4. Technical parameter
Itemthickness (mm)area weight(g/m)density (mm)roll length (mm)
Emn334501000-200040
Emn446001000-200040
Emn557501000-200030
Emn669001000-200030
Emn8812001000-200020
Emn101015001000-200020
Emn121218001000-200015
Emn151522501000-200015
Multiaxial fabric/ fiberglass cloth/ stitched fabric
1.Usage and feature
It is a non-curling reinforcement material that having multiaxial and multilayer. Its different function are led the fiber layers, axles, density and each layer weight different. It is getting through sewing up polyester strand between each layer. It could be combined by means of different direction (0, 90+45, -45) or sewed up with short cut strand or fiber mat. The typical application of thins of products are wind energy, marine/ ship building, recreation/ leisure products, sutomotive, aerospace & defense etc..
2.Typical parameter
ItemsProduct codeLayer weight (g/s.Q.Total weight
00
90
45
-45Stitch yarn
Mat 1025380
Eku500 (0)m504720 1050532
Eku1400 (0)m300 hs-7132395 183001736
Single weftEku300 (90) hs-2 300 15 315
Eku600 (900hs-9 600 15 615
BiaxialEkb400 (0/90236199 12 447
Ekb600 (0/90295297 14 606
Ekb800 (0/90413396 12 821
Ekb1450
90/90) hs-61134319 18 1471
Ekb600 (0/90)m300295297 16300908
Ekb2075 (0/90)m150 hs-71323756 181502247
Biaxial doubleEkb400 (45/-45 820020014 422
Ekb600 (45/-45 82972978 610
Ekb800 (45/-45 83923927 799
Ekb1000 (45/-45)m300 488488123001288
TriaxialEkt600 (0/45/-45295 148148123001288
Ekt800 (0/45/-45)m50413 2002001050873
Ekt1170 (0/45/-45394 39039012 1186
Ekt1150 (45/90/-45 39138338310 1167
Four axialEkq600 (0/45/90/-4515815114814811 616
QuadraxialEkq900 (0/45/90/-4535514220020012 909
Ekq1900 (0/45/90-4547346247747727 1916
300g fiberglass mat/ chopped strand mat/ csm/ sheet/ felt
1.Introduction
E-glass chopped strand mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It is compatible with unsaturated polyester, vinylit, epoxy resins. The roll width ranges from 50mm to 2080mm. Special requirements may be available upon request.
2.Usage
It is used for processing and manufacturing frp products with getting through hand lay up process, filament winding process and press molding. Typical products is including bathroom accessories, pipe, building material, automobile, furniture, vessel, cooling towers and other frp products
3.Packing
Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets.
4.Parameter
Density(g/m2Moisture content (%Loss on ignition (%Binder typeWidth (mm)
2250.22.1-6.3Powder/ emulsion1040 1270 2080
2500.22.1-6.3Powder/ emulsion1040 1270 2080
3000.22.1-6.3Powder/ emulsion1040 1270 2080
4500.22.1-6.3Powder/ emulsion1040 1270 2080
6000.22.1-6.3Powder/ emulsion1040 1270 2080
