Please click here to check who's online and chat with them.

Hongkong Paramount Industrial Group Limited

Supplier From Hong Kong
Aug-17-09
Supplier : Dock fenders, laminated, molded and extruded rubber bumpers, steel-face dock bumpers, wall and corner guards, wheel chocks, speed bumpers, parking blocks, commercial and residential matting

Established: 2007

Verification Status



Contact Details:
-
Hong Kong
Hong Kong


Recent User Reviews

This user has not received any reviews yet!
 
 
Contact Supplier
Renew

More Items Similiar to: Hongkong Paramount Industrial Group Limited

Aug-17-09
 
Features:

Tough plies of truck tire material or conveyor belt virtually eliminates chipping or abrasion, unlike molded rubber, extruded rubber or wood plank bumpers.
Attractive deep black color enhances a neat, professional architectural look.
Manufactured under pressure exceeding 1, 500 lbs. To absorb over 80% of impact force.
Anchor bolts are protected by at least 3" of rubber to prevent damage.

Applications
Available in two models: bumpers with angles for most applications-- equipped with 1/4" steel angles on both ends; and bumpers with flat plate for use with dock levelers--optional 1/4" flat steel plate for one or both ends.
Have unlimited applications in factories, warehouses and docks.
Vehicle impact protection for loading docks.
Projecting above low docks.
Rub rails at the sides of truck wells.
Wall bumpers to protect against fork lift trucks.
Special construction features to accommodate unusual anchoring conditions.

Benefits
Provides protection against vehicle damage to docks, buildings and cargo.
Absorbs over 80% of truck impact and shock to protect dock and building.
Leading bumper sold in the industry today.
Standard sizes shipped within 24 hours of order confirmation.
Eliminates costly repairs from severe shock to loading docks.
Constructed to last and provide years of protection.
Maintenance free. 5 year warranty.
Material
Fabric reinforced rubber pads cut from selected recycled truck tires or conveyor belt.
Rubber pads laminated between structural steel angles and secured with 3/4" steel tie rods.
Rubber pads 4 1/2" or 6" thick.



As per buyers' option
GOLD Member
May-13-20

Pp Car Bumpers In Bales Origin Portugal

$380
MOQ: 25  
Sample Available
Supplier From Singapore, Singapore
 
PP CARBUMPERS in bales
Origin Portugal.
Loading: 22Mt/load.
GOLD Member
VERIFIED
Oct-10-24

Pp Granules

$800
MOQ: 5  Metric Tonnes
Sample Available
 
PP contains no polar groups and has excellent electrical insulation properties. Its water absorption rate is less than 0.01%. PP is a semi-crystalline polymer with good chemical stability. Itis stable to most chemical except strong oxidizers. Inorganic acid, alkali and salt solutions have almost no damaging effect on PP.
PP has good heat resistance and low density. Its melting point is at around 165â??. It has high tensile strength and surface hardness and good environmental stress crack resistance.It can withstand 120â?? continuously.
Sinopec is the largest PP producer in China,Its PP capacity accounted for 45% of the country's total capacity. The company currently has 29 PP plants by the continuous process (including those under construction)
PP Application
PP has a variety of applications. It is suitable for multiple processing methods such as injection molding,extrusion molding and blow molding and is widely used in the textile,packaging, electrical household appliances, automobile and real estate industries.
PP Injection Grade Application
PP impact copolymer is widely used in the production of industrial products,such as dashboard, auto interior decorations, auto bumpers, interior and exterior parts of washing machine, accumulator containers and tanks. It can also be used to make household articles, such as bottle caps, cookware, furniture, toys, toolkits, travel cases, bags and various packaging containers.
PP Application
PP homopolymer is widely used in the production of small electrical household appliances, such as electric kettles, electric utensils, electric irons,air heaters,electric hair,dryers, electric toasters and electric hand dryers.
PP random copolymer� Application
PP random copolymer is widely used in the production of medical appliances with high transparence, such as medical syringes, medical infusion bottles,medical centrifuge tubes and sample tubes. It is used in the production of food containers,stationery, packaging materials and houseware.
VERIFIED
Feb-11-22
 
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed

Properties
Good Dimension Stability
High Impact Strength
Good Heat Aging Properties
Low Density
Good Chemical Resistance
Good Processability
Low Cost
Extensive Compounding capabilities
Good Recyclability
Non-hygroscopic, pre-drying is not necessary
Coloured grades available

Typical Applications
Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs
Industrial products- gasket & seal, weather striping etc.
Appliance and housewares Products
Sporting goods
Personal Care goods
Wire and cable Flexible cord, welding cable jacket , automotive wire & cable
Health care
Specification missing -take from website

Specification
Hardness
Set(ISO 868) (Shore A-D) 50 �??-60 D
Density
(g/cm3) 0.88 1.12
Compression(Set) Very Good
Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3
Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3
Elongation Set (ISO 527) (%) 400 - 1000
Working Temp. Max. (C) 100
Working Temp. Min.(C) -40
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Medium
Motor Oil Resistance Medium
Acid-Base Resistance Excellent
UV-Ozone Stability Excellent
Wide hardness range
Does not require vulcanisation-quire higher saving on the processing costs
Remains flexible at low temperatures
High temperature resistance
Electrical insulator with very low conductivity
Has grades with very low compression set
Grades having excellent abrasion resistance
Excellent tear resistance
100% recyclable
PVC free
Resistance to solvents
Resistance to oil
Resistance to acids bases and detergents
Resistance to UV and ozone
Resistance to bacterial and fungus growth
Has low toxic potential, with many grades conforming with FDA regulations
Halogen free flame retardancy (VO-V1-V2)
Colored grades available
Allows direct colouring during processing by utilizing PP or PE based color
2-shot molding onto wide range of plasics
Suitable for co-extrusion process
GOLD Member
Jun-04-24
Supplier From Mumbai, Maharashtra, India
VERIFIED
Oct-13-22
Supplier From Horana, Western, Sri Lanka
VERIFIED
Jan-25-23

Bope Film

MOQ: Not Specified
Supplier From Muansamutsakorn, Samutsakorn, Thailand
 
Co-extruded Oriented Down-gauge PE Film (Grade no. DL)
BOPE is a type of Co-extruded Bi-axially Oriented PE film
offers a number of benefits over traditional blown PE:
High web strength allows as much as 50%
Reduction of the total thickness of packing materials.
Outstanding hot tack and heat sealing
performance for high speed lamination and FFS operation.
Excellent optical property, web flatness, and
High stiffness, impact-resistance, puncture-resistance at low
temperature down to -30â??
Good barrier performance.
Stable surface tension provides good printing conditions.
VERIFIED
May-09-23
 
Gives excellent flow properties and highly effective lubricating properties.
Improves dispersion of fillers and gives smooth surface in extruded and molded products. Works as internal lubricant improves flow gives lower die swell (improves dimensional stability) and benefits in filler incorporation. Acts as external lubricant aids in easy removal of molded parts in engineering plastics and thermoset process applications, also suitable for transparent plastics.

JC LUB PE-72 is a high molecular weight lubricant, suitable with PVC / PET / Masterbatch, polymers like Natural and Synthetic Rubbers. It is used as a process aid in extruding and molding rubber compounds, imparts excellent flow properties. It avoids mold fouling in Reclaim rubber and Butyl compounds.

It is advisable to add JC LUB PE-72 added together with the filler.

Appearance : Creamish Powder

Available Forms: Granules, Powder

Packing Size: 25 kgs.
Apr-26-19

Bumper Mold

$70.00K
MOQ: Not Specified
 
Mould Steel: S45C, P20, 2738, 738H, NAK80,SKD61,E420,etc.(For
Reference)
Mould Base: LKM or Self-made.
Hot Runner: YUDO, HASCO, M-H-R, Our self-made brand etc. (For Reference)
Mould Components: HASCO, DME, PUNCH, JINHONG,etc.(For Reference)
Main Softwares: Autocad, UG, Catia, Solidworks, etc.
Packing: Exported Wooden Case
Lead Time: 80days
Payment Terms: T/T
After-sales Services: Experienced engineers will provide all-round technical solutions
to any problems occurred in customers mould operation.
Features: High efficiency, short delivery time, competitive price.

Verification Status