Application: The properties of TPE plastic pellets include elasticity, elasticity, hardness, durability, and temperature resistance. Therefore, TPE is commonly used in a variety of applications, including: Packaging: TPE is used in the production of flexible packaging, pouches, lids, and other packaging accessories. Toys and children\'s products: TPE is safe and flexible, so it is often used in the production of toys, safety cushions, and other children\'s products. Household appliances: TPE is used in the production of products such as buttons, handles, and bases of household appliances. Automotive applications: In the automotive industry, TPE is commonly used in parts such as cushioning, accessories, and seat belts. Electronic technology: TPE is used in the production of electronic accessories such as phone cases, cables, and wires.
TPE (Thermoplastic Elastomer) Is a kind of high elasticity, high strength, high elasticity rubber,, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately. Thermoplastic elastomer has thermoplastic processing performance, but also has the physical properties of vulcanized rubber. It can be described as a combination of advantages of plastic and rubber. TPV (thermoplastic vulcanizate) is also known as elastomeric alloys (EA). TPVs are formed in a reactive compounding process that is usually the combination of a polyolefin (Polypropylene or Polyethylene) with an elastomer (SBR, NR, EPDM, NBR or Butyl). In a reactive compounding process, the elastomer is completely cured. This dynamic vulcanization process in TPV production generates the webbed network in the elastomer domain while still retaining melt- processing capabilities. TPV consists of micron size cross-linked elastomer particles dispersed throughout a continuous matrix of thermoplastic material. Because of its thermoplasticity and melt flowability, TPV can be processed on standard thermoplastic equipments (such as injection molding, extrusion, blow molding, calendaring, overmolding etc.) with the efficiency and economy associated with thermoplastic materials. Further, the scrap from these processes can be recycled. OEM is welcome. Email:shanghaikuhoo@163.com KUHOO TPE/TPV features 1. Wide range of hardness; 2. Non-sticky, 3. Easy to process and color; 4. Overmolding to PA,PP, PE, ABS; 5. Superior Resilience; 6. Excellent brittle temperature; 7. Environmental-friendly; 100% recyclable; 8. Low odor and fogging; 9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion. 10. Excellent UV and aging resistance
Brand: Chemprene Hardness: Shore A35-50D Advantage: ECO Friendly, Excellent weather resistance, competitive price, prime quality Processing methods: Extrusion, injection and blow molding Appreance: pellet granule Gertificate: ROHS, REACH, SGS, ISO Flame rating: HB V0 Application: automotive, cable&wire, building construction, electronics
Shanghai Kuhoo Polymers Co., Ltd (TPE TPR TPV) TPE, TPR(Thermoplastic Elastomer or thermoplastic rubber) Is a kind of high elasticity, high strength, high elasticity rubber, also has the characteristics of injection molding of thermoplastic rubber. Non-toxic and safe, widely hardness, excellent coloring, soft touch, weather resistance, fatigue resistance and temperature resistance, excellent processing performance, not curing, can be recycled to reduce costs, It not only can be the second injection molding with adhesive coated PP, PA, PE, PC, PS, ABS and other substrate, and also be formed separately. Injection, extrusion, blow molding, overmolding are all suitable. Features of KUHOO TPE raw material, tpe material, TPE compound, TPE granule, TPE resin, TPE pellet or thermoplastic rubber or Thermoplastic Elastomer: 1. Wide range of hardness; 2. Non-sticky, 3. Easy to process and color; 4. Overmolding to PA,PP, PE, ABS; 5. Superior Resilience; 6. Excellent brittle temperature; 7. Environmental-friendly; 100% recyclable; REACH RoHS compliance; 8. Low odor and fogging; 9. Versatile processing capabilities, such as injection, blow molding, extrusion, co-extrusion. 10. Excellent UV and aging resistance
Brand: Chemprene Hardness: Shore A35-50D Advantage: ECO Friendly, Excellent weather resistance, competitive price, prime quality Processing methods: Extrusion, injection and blow molding Appreance: pellet granule Gertificate: ROHS, REACH, SGS, ISO Flame rating: HB V0 Application: automotive, cable&wire, building construction, electronics
Brand: Chemprene Hardness: Shore A35-50D Advantage: ECO Friendly, Excellent weather resistance, competitive price, prime quality Processing methods: Extrusion, injection and blow molding Appreance: pellet granule Gertificate: ROHS, REACH, SGS, ISO Flame rating: HB V0 Application: automotive, cable&wire, building construction, electronics
Thermoplastic vulcanizates(TPV's) are a very special class of TPE prepared by dynamic vulcanization or cross-linking process of PP and EPDM rubber, It builds favourable properties which make it high performance polymer, compressible and heat resistance. TPV seen strong growth in automobile seals, pipe seals, wire & cable jacketing compound and other application where a high heat resistance required. Thermoplastic vulcanizates with excellent properties of heat resistant and breaking strength Properties High temperature resistance Wide range of hardnesses Resistance to chemicals and weathering Low compression set Flex fatigue resistance Lightweight Good colourability Typical Applications Interior and Exterior Automotive parts Wire & Cable Jacketing compound Gaskets Grommet, sockets Building and construction materials Sporting goods Electrical and electronics good Specification Hardness Set(ISO 868) (Shore A-D) 40 A - 55 D Density (g/cm3) 0.93 - 1.1 Compression(Set) Excellent Tensile Set (ISO 527) 3 MPa 10 MPa Tear Set (ISO 34) 20 kg/cm3 - 120 kg/cm3 Elongation Set (ISO 527) (%) 500 1000 Working Temp. Max. (C) 140 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Good Motor Oil Resistance Excellent Acid-Base Resistance Excellent UV-Ozone Stability Excellent
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed Properties Good Dimension Stability High Impact Strength Good Heat Aging Properties Low Density Good Chemical Resistance Good Processability Low Cost Extensive Compounding capabilities Good Recyclability Non-hygroscopic, pre-drying is not necessary Coloured grades available Typical Applications Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs Industrial products- gasket & seal, weather striping etc. Appliance and housewares Products Sporting goods Personal Care goods Wire and cable Flexible cord, welding cable jacket , automotive wire & cable Health care Specification missing -take from website Specification Hardness Set(ISO 868) (Shore A-D) 50 �??-60 D Density (g/cm3) 0.88 1.12 Compression(Set) Very Good Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3 Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3 Elongation Set (ISO 527) (%) 400 - 1000 Working Temp. Max. (C) 100 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Medium Acid-Base Resistance Excellent UV-Ozone Stability Excellent Wide hardness range Does not require vulcanisation-quire higher saving on the processing costs Remains flexible at low temperatures High temperature resistance Electrical insulator with very low conductivity Has grades with very low compression set Grades having excellent abrasion resistance Excellent tear resistance 100% recyclable PVC free Resistance to solvents Resistance to oil Resistance to acids bases and detergents Resistance to UV and ozone Resistance to bacterial and fungus growth Has low toxic potential, with many grades conforming with FDA regulations Halogen free flame retardancy (VO-V1-V2) Colored grades available Allows direct colouring during processing by utilizing PP or PE based color 2-shot molding onto wide range of plasics Suitable for co-extrusion process
Thermoplastic elastomers (TPEs) are also known as thermoplastic rubbers. These are a class of copolymers, which are used are plastic and rubber that includes a material with both thermoplastic and elastomeric properties. With the help of compounds as SBS or SEBS it forms Thermoplastic elastomers which are known as TPE, it facilitates to know the general level of performance and asset of the compound Properties grades and transparent grades available Household Appliances Consumable Goods Pleasant Surface Feel (Soft Touch) Adhesion to Polar thermoplastic such as ABS, PC & PP Good Tear strength, abrasion resistance High Flexibility Durability Low compression set Typical Applications Kitchen Utensils Household Articles Soft GripSeals manufacture of shoe sole material shock-absorbing material packing material grips anti-slip pads, rubber and plastic modification Specification Hardness Set(ISO 868) (Shore A-D) 30 A - 50 D Density (g/cm3) 0.88 1.4 Compression(Set) Good Tensile Set (ISO 527) 1.5 MPa 12 MPa Tear Set (ISO 34) 20 kg/cm3 - 60 kg/cm3 Elongation Set (ISO 527) (%) 300 - 1200 Working Temp. Max. (C) 130 Working Temp. Min.(C) -30 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Good Acid-Base Resistance Excellent UV-Ozone Stability Medium
