Human Information Technology Co., Ltd.

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter

SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.

Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback

Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time

Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console
They can realize the integrated management to all chassis.
Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control
Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port.
Supporting remote and local management.
With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters.


Standard package

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:

Interface:

Left side:

One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)

Right side:

One rs-232 console port (rj-45 connector)
One power jack

Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:

Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125

Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)

Technical parameter
1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx
2.Connectors:(rj45-utp and fiber sc)
3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100
4.Data tranfer mode: 10/100mbps
5.Duplex mode :full or half duplex mode
6.Power requirement:ac 100-260v dc1a +5v
7.Ambient temperature:0 - 70degree
8.Humidity:5% - 90%(noncondensing)
9.Dimenstons:26*71*97mm
10.Cable:cat.5 utp cable
11.Fiber: multi-mode
Specification
Connector type: sc
Typical distance: 60km
Fiber type: singlemode
Wavelength: 1310nm
Min tx pwr: -5.0dbm
Max tx pwr: -1.0dbm
Sensitivity: -35.0dbm
Link budget: 29.0dbm

Brief introduction:
The Product provides customer with the most cost-effective solution for transmission with 1 channel uncompressed digital l video and 2 RS485 data over one single fiber cable. It is an easy installation and adjustment free device while providing high quality, real-time video
Features:
Industry-level design, SMT Assembly
Proprietary IC Core
PAL/NTSC/SECAM Compatible
Free From In-field Adjustment
Protection against lightening strike and surge
19' 3U Rack Mount Chassis Option
Application:
Intelligent Transportation System
Public Security Surveillance
Industrial Closed Circuit Television Surveillance
Intelligent Building
Specifications:
Video
Bandwidth: 6.5MHz
Quantization: 10bit
DG: 1%
DP: 0.7íptyp
SNR: 71 dB
Data:
Interface Type: RS-232/485/422, Manchesterú¼Biphase
Operation Mode: Full-duplex/Half-duplex
Data Rate: 0~300Kbps
BER: <10-9
Power supply:
Input AC110---240V
Output DC5V2A
Power 3.8W
Physical dimensions: 13 x 152.8 x 49.5mm
Weight: 120g
Environment:
Operation temperatureú¦-40oC ~ +85oC
Storage temperatureú¦-40oC ~ +85oC
Humidity: 5%--95% Non-Condensing
Transmission rangeú¦
Single-modeú¦ 20/40/60/80/100 Km
Multi-modeú¦ 2Km

Media converter

Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)

Conversion mode


Medium conversion, storing and forwarding

Mac address table


I k

Buffer space


1mbit

Flow control


Full duplex state: flow control; half duplex state: back pressure mode

Delay


9.6us

Bit error rate


<1/1000000000

Mtbf


100, 000 hours

Led


Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)

Power


Ac220 0.5a/pc-48(builtin)

Power consumption


5w

Operating temperature


-10~55ºc

Operating humidity


5%~90%

Storage temperature


-40~70ºc

Storage humidity


5%~90% (non-condensing)



Dimensions


140mm * 111 * 30mm(in) 95 x 70 x 26mm(out)

Media converter

Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)


Export carton with inner box

MC 5Amp converter. 0.65/-$ x 12 pcs = fob/usd 7.80
MC 13Amp converter. 0. 75/- $ x 12 pcs = fob/usd 9.00

MC-5A
MC -13A

Contact: amily[at]veecom dot com dot cn

GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.

GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.

GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.




245mm*215mm*50mm