Video To Fiber Converter

Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .

Product characteristics

1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.

Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)

Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing

Application :

Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance

Overview
H 1/2/4/8/16Ch series Video Digital Optical Converter adopt the advanced international digital video and optical fiber transmission technology, and implement the transmission of real-time & synchronization, no-distortion and high quality video effect, which can meet the user requirement; the play-and-plug design makes the installation more convenient and easier, and it is unnecessary to implement the spot adjustment. Its optical module and core circuit adopt the imported components that have high stability, and all optical & electrical interfaces conform to the international standards, which is applied to the different working environment.

Features:
1)Card type or independent structure, which is applied to centralized management 2U/4U framework
2)8-bit digital code and non-compression type video transmission
3)Support any high-resolution video signal
4)5Hz-10MHz video channel
5)Automatic compatible PAL, NTSC and SECAM video system
6)With APC circuit, constant input optical power, and large dynamic range
7)Kilomega optical fiber transmission, large capacity, and easy to upgrade
8)Power supply and other parameter state indication, which can monitor the operation condition of system
9)Support no-damage regenerative trunk of video
10)Advanced self-adapting technology, and it is unnecessary to implement the adjustment of spot electrics or optics when using
11)Industry-grade design and modularization design make the equipment reliable and flexible

Competitive Advantages of the product
1)Most competitive factory price
2)Best reliable quality
3)Prompt delivery
4)Remarkable post-sale services.
5)Rich experience of OEM&ODM co-operation

Main Markets/Key Customers:Europe,US,India,South Asia, Middle East Telcom
Delivery Terms :EXW/DHL /TNT /EMS etc.
Delivery Lead Times:2-3working days
Payment Terms:T/T ,WEST UNION, PayPal
Min Quantity:1
Price Information:0-150 USD
Quality Process Certifications :CE,FC,RoHS

8 channels video converter

Detailed Product Description

8 Channel Video Converter is a fiber optic digital multiplexer for transmitting 8 channels high quality, uncompressed digital video, 4 channels of bi-directional data and audio, 4 E1 and one 100M Ethernet over single fiber cable.

Applications for this product include CCTV, video surveillance, homeland security, ITS etc.

Technology Characteristic:

Transport 8 channels of High quality video over one optical fiber cable
Exceed RS250C Medium Haul Specification for DG, DP and SNR
6.5MHz video bandwidth, Compatible with NTSC, PAL and SECAM
Uncompressed video, 8 Bit digital encoding/decoding
Transmission of 4 channels of any directional audio
Provide 4 channels of bi-dir data compatible with RS232, RS422/ RS485
Support 4 E1, G.703 standard
One 10M/100M Ethernet compatible with IEEE802.3
Easy installation and adjustment free
Transmission up to 60KM over one fiber



Interface parameters:

Indicators :
Power, Optical Link Status
Video Signal, Audio status, Data traffic

E1 Alarm, Ethernet Link Status

Video :
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75ª+
Digitization: 8bits,15M Sample
Bandwidth 6.5MHz
DG <1%
DP <0.5o
SNR >63dB(weighted)
Connectors: 8BNCs
Audio :
Channel:1~4, Bi-dir
Audio Input: unbalanced, 600Ohms
Digitization: 16bit@48k
Frequency: 10Hz to 20KHz
SNR: >70dB
Connector: RJ45

Data :
Channel: 1~4, Bi-directional
Data Rate: 0~~23.04Kbps/channel
Selectable RS-232/RS-422/RS-485
Connector: RJ45

E1 Interface :
Bit rate: 2.048Mb
Line code: HDB3
Standard: ITU-T G.703
Connector: CC3(1.0/2.8)
line impedance: 75ohm
Jitter Performance: G.742 and G.823

Ethernet :
Data Rate: 10/100Mbps auto detect
Standard: IEEE802.3
Connector: RJ45
Auto-negotiation with half/full duplex

Working Condition:


Power : 220VAC/50Hz, standalone device
Power Consumption : < 5W
Environment Temperature : 0-50


Other Characters:

Size : 434í-200í-30mm
Net Weight : 900g

USB 3.1 Type C to HDMI VGA Adapter
USB Type-C Terminal equipped USB Type-C image conversion adapter that converts video signals of PC, tablet, etc., and can output to display TV projector, etc. equipped with HDMI input terminal.

Media converter

Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)

Conversion mode


Medium conversion, storing and forwarding

Mac address table


I k

Buffer space


1mbit

Flow control


Full duplex state: flow control; half duplex state: back pressure mode

Delay


9.6us

Bit error rate


<1/1000000000

Mtbf


100, 000 hours

Led


Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)

Power


Ac220 0.5a/pc-48(builtin)

Power consumption


5w

Operating temperature


-10~55ºc

Operating humidity


5%~90%

Storage temperature


-40~70ºc

Storage humidity


5%~90% (non-condensing)



Dimensions


140mm * 111 * 30mm(in) 95 x 70 x 26mm(out)

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:

Interface:

Left side:

One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)

Right side:

One rs-232 console port (rj-45 connector)
One power jack

Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:

Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125

Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter

SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.

Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback