Scope Standard ASTM D93, GB / T261-83 and ISO2719-1988 international standards. Features 1, large-screen LCD, friendly user interface 2, also has a fault of Jane function, automatic fault prompts 3, automatic temperature control, automatic lid opening and ignition, automatic print, automatic cooling, automatic air pressure correction is completed and the machine automatically displays the flash point temperature, built-in mini thermal printer to automatically report the test results 4, using USB / 232 communication interface to communicate with the host machine, a centralized management system for easy composition 5, from Germany imported stainless steel temperature sensor for detecting the temperature data is accurate and reliable 6, mechanical moving part of the servo-driven belt drive, work without gaps, low noise, reliable easy to damage, no lubrication maintenance. 7, just set the expected flash point, the instrument automatically in strict accordance with the standard test, the test ends automatically print test results, and there is a tone. Without judgment and do not rely on the operator's proficiency. 8, thermocouple detection sensitivity high detection accuracy, durability and easy maintenance. 9, sample box with built-in cooling mode heating thermostat thermal compound, and the use of German imports whisk Dan Adams compressors, thermostats no lag reliable, easy to damage Technical Parameters 1. Environment: Temperature 0 ~ 60 ? Relative humidity: = 80% 2, Display: large-screen LCD 3, heating rate: less than 50 ? 1 ? / min, higher than 50 ? 2-3 ? / min 4, temperature range: -30 ~ + 80 ?, accuracy ± 1 ? 5, the temperature measurement element: PT100 stainless steel temperature sensor 6, the ignition: gas flame ignition 7, Detection: Automatically detects a flash fire and automatically print test data. 8. Communication: USB / 232 communication interface. 9, cooling system: compressor cooling 10, print: You can print the results of this experiment or any print storage 11, using the power AC220V 50Hz, the total power: 1.5 kw
Scope of application For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F). Benefits - Conforms to ASTM D92 and related specifications - For flash points above 79 C (175F) Function characteristics 1,english operating software prompts; 2, with the experimental date, test time parameter prompts; 3, automatic correction of atmospheric pressure and calculated correction values; 4 differential detection, automatic correction system deviation; 5, scan, ignition, detection, print test data computer is done automatically; 6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel; standard wooden case
Place of Origin: Chongqing, China (Mainland) Brand Name: TOP Model Number: ACD-3000I Power: Electronic Usage: Auto Testing Machine Type: Fully Automatic Oil Acidity Tester Condition: New Method of Display: 7 inch color LCD Testing Range: 0.0005~0.5000mgKOH/g Power supply: 220V±10%,50Hz±5% Environmental Humidity:
PE-AOBDV Automatic Oil Breakdown Voltage Testeris a highly precise instrument, which can be applied to measure either the breakdown voltage or also check the withstanding voltage for a predefined time. Usual available automatic test sets only perform the former function, but PE-AOBDV can do both. PE-AOBDV can measure the breakdown voltage repetitively and computes an average reading, for a proper decision making. PE-AOBDV consists of an integrated Oil Cup, HV AC power source. Features - 0-80kV or 0-100kV smooth operation, 5mA trip current - Complete Automatic operation - Non-contact magnetic stirring - Programmable Stir, Hold, and Intermediate Stand times - Programmable voltage ramp rate - Repetitive test sequence and average readings - Digital display output - Integrated thermal Printer - Internal memory for data storage and recall - Included IS 6792, IEC 60156 and GB507-86 test sequences - Programmable test sequences as per requirement. 1 pc - 25 kgs.
FDT-0931 Automatic acid tester (extraction method) Scope This instrument is mainly used for measuring the acid value of petroleum products such as insulating oil and steam turbines. The instrument integrates optics, electronics, mechanical and electrical, chemical and other high-tech products. It has the characteristics of fast measurement, accuracy, reliability and good repeatability. Features 1, large-screen LCD, English menu prompts, no identification keys; 2. Wrap Cup, automatic detection, automatic storage, automatic print test results; 3, the instrument can detect oil sample of six; 4, innovation introduced the US imports XECOM data processing chip, fast and accurate data processing; 5, the use of import VERDER accurate injection systems, precision control results progress; Technical Parameters 1, supply voltage: ~ 220V ± 10% 50Hz 2, the maximum power consumption:
Technical Parameters Method of Display 7 inch color touch LCD with English display Method of Testing MPU controlled electrolysis(Karl Fischer Coulometric Method) Rate of Electrolysis 2.4mgH2O/min Electrolysis Current Auto-control within 430Ma Testing Range 0.01ugH2O-200mgH2O Water Content Range 0.0001%(1ppm)—100% Sensitivity 0.01ugH2O Accuracy Water Content: 2ugH2O-100ugH2O; Deviations=±1ug, Water Content: 100ugH2O-1000ugH2O; Deviations=±2.9ug, Water Content: >1000ugH2O; Deviations=±0.2%(excluding deviations of sample injection) Drift Compensation Auto-control via MPU Stirring Speed Adjustable and steerable End-point Indication LCD display /output via printing / voice warning / end-point indication light Data Input Input via touch screen Sample Number Numbered by users Storage Infinite storage capacity Printer Thermal printer, high-speed, low-consumption, with 44 millimeter-wide paper Printing Content ug / ppm / mg/L / sample number /experimenter / date Calendar/Clock automatic display and print analyzing time and date Self-checking Breakdown self-checking Special Function Work independently or connected with laptop or other computers Power Consumption
Product description Anti Emulsification performance automatic tester meets the requirement of GBT 7305-87 and GBT 7605-87, which adopts 32-bit high-performance microprocessor, high definition color touch screen and digital PID control algorithm to achieve high accuracy of temperature control, good repeatability, automatic lifting of stirrer, simultaneous test of four samples, smart storage and convenient check of test result. Technical index Temperature measurement Platinum resistance Water bath temperature 54 Room temperature 100 can be set arbitrarily Control accuracy 0.1 Stirring speed 1500 15 rmin Number of cylinders 4 Self-check function Stirring device lifting and rotating Display High definition color touch screen Power supply AC 220V 22V Power 1800VA Frequency 50Hz 2.5Hz Ambient temperature 10 35 Ambient humidity 85 Weight about 24kg Profile size 358mm 302mm 858mm Anti-emulsification performance automatic tester
Supplier: Flash point testers, viscometer, water content tester, petroleum products kinematic viscosity tester, disttilation tester, density testers, solidifacation point testers, pour and cloud point testers and other oil testers
?equipment model and name Csl-y impact specimen gap hydraulic broaching machine ? equipment usage Impact specimen notch broaching machine is the dedicated and affiliated equipment with metallic pendulum impact testing machine, the machine adopts hydraulic drive, electric control the rise and fall of broach, broach lifting speed can be adjusted, adopting the lubricating oil to lubricate blade mouth parts at the same time, to ensure the sample accords with a requirement gap size and surface finish.The machine due to the use of a forming principle, the machining gap of good identity. Broach manufactured high-quality high-speed w18cr4v steel alloy, and its high hardness, good wear resistance, long service life, per knife can be processed more than 20000 samples. ? applicable standard Gb/t229-2007« metal material charpy pendulum impact test method»; Astm e23-02a«metal material gap specimen standard impact test method»; Iso148-2008«metallic materials-charpy pendulum impact test»; Din 50 115-1991«metal material impact test special sample size and fracture judge» Iv main technical parameters Sample notch type U type(u2, u3, u5), v type(v2) Processing sample size 10×10(7.5 or 5)×55mm Broach hardness =hrc65 Installed broach quantity 2 Cutting speed 2.5m/min ( can adjust) System pressure 2.5mpa Hysraulic oil storage 25l Broach stroke 340mm(u2, v2), 390mm(u5) Broach materials W18cv4v Motor power 370w Dimensions 480mm×660mm×1200mm (l×w×h) Weight 200kg V standard configuration 1.Host one 2.V2 broach one 3.U2 broach one Vi optional accessories 1. U3 broach 2. U5 broach
