Shenzhen 3 One Data Co.

-10/100M self-adaptive Ethernet Interface
-Support ATUO MDI/MDIX, allowing crossover cable connection or straight-through cable connection
-Selectable Baud rate between 1299bps and 921.6Kbps -Build-in WEB server, allowing users to configure their webpage easily
-Auto reconnection after a network break, ensure the reliable TCP connection for the whole network
-Support DNS, can achieve a communication using the domain name
-Compatible to SOCKET working modes (TCP Server, TCP Client, UDP and etc.), the upper layer machine software is written strictly following the SOCKET rules
-TCP modes supports multi connections, specific data sending after password verifying, allowing up to 4 user to manage a single embedded device at a same time
-Advanced security mechanisms, prevent illegal access from unauthorized visitors, provide IP verifying firewall, and up to 8 configurable IP or IP segment certifications
-Support the local and remote upgrading of the firmware;Support AT Command configuration;Support remote configuration
-16 bits ARM7 CPU;
-Ethernet: 10/100Mbps
-Protections: build-in 2KV surge protection
-Type:RS232, RS485
-Control Signals :TXD,RXD,GND
-Parity: None, Even, Odd
-Data Bit: 5, 6, 7 or 8 bits
-Stop Bit: 1 or 1.5 bits
-Flow Control: Non
-Baud Rate: 1200bps~921.6Kbps
-Compatible Protocol: Ethernet, ARP, IP, UDP, TCP, BootP
-Network Services: DHCP, DNS, PPPoE, TFTP, HTTP, UDP Broadcasting -Client/Server: Server
-Ethernet Connector: RJ-45
-Ethernet Speed/Duplex: Auto-negotiation 10/100Mbps, Full/Half duplex -Auto-MDIX: Yes -WOL: Magic Packet, Wakeup Frame, Link-Up events
-Software Tool: VSP Driver, DS Manager, Web Server
-Configuration Mode: Web browser configuration tool, Windows Hyper Terminal, Telnet, Serial port configuration
-Power Input: 3.3V DC
-Physical Size (Wí-Dí-H): 77.5í-41.7í-22.7(mm)

Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter

SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.

Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback

Brief introduction:
The Product provides customer with the most cost-effective solution for transmission with 1 channel uncompressed digital l video and 2 RS485 data over one single fiber cable. It is an easy installation and adjustment free device while providing high quality, real-time video
Features:
Industry-level design, SMT Assembly
Proprietary IC Core
PAL/NTSC/SECAM Compatible
Free From In-field Adjustment
Protection against lightening strike and surge
19' 3U Rack Mount Chassis Option
Application:
Intelligent Transportation System
Public Security Surveillance
Industrial Closed Circuit Television Surveillance
Intelligent Building
Specifications:
Video
Bandwidth: 6.5MHz
Quantization: 10bit
DG: 1%
DP: 0.7íptyp
SNR: 71 dB
Data:
Interface Type: RS-232/485/422, Manchesterú¼Biphase
Operation Mode: Full-duplex/Half-duplex
Data Rate: 0~300Kbps
BER: <10-9
Power supply:
Input AC110---240V
Output DC5V2A
Power 3.8W
Physical dimensions: 13 x 152.8 x 49.5mm
Weight: 120g
Environment:
Operation temperatureú¦-40oC ~ +85oC
Storage temperatureú¦-40oC ~ +85oC
Humidity: 5%--95% Non-Condensing
Transmission rangeú¦
Single-modeú¦ 20/40/60/80/100 Km
Multi-modeú¦ 2Km

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:

Interface:

Left side:

One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)

Right side:

One rs-232 console port (rj-45 connector)
One power jack

Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:

Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125

Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)

MC 5Amp converter. 0.65/-$ x 12 pcs = fob/usd 7.80
MC 13Amp converter. 0. 75/- $ x 12 pcs = fob/usd 9.00

MC-5A
MC -13A

Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .

Product characteristics

1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.

Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)

Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing

Application :

Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance

Product name: 10/100m fiber media converter

Dual fiber

Product intro:

The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.

Main features:

Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.

With the function of automatic recovery to prevent system halt.

Indicate the working status.

Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.

Optional inside and outside power supply.

No adjust electrical and optical environment.

Led indicator light shows the working performance status.

Duplex mode:

Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.

Inserting to 14 slots rack with play and plug.

Led status indicator light makes easy diagnosing network and checking troubleshooting.

Good flow control and reset fuction prevent system halt.

Transmission distance:

Mm(multi mode): within 2 km

Sm(single mode):20km, 40km, 60km, 80km, .100km

Environment parameters:

Working temperature: 0íµí½65íµ

Storage temperature: -40íµí½+85íµ

Humidity: 5%í½90%

Other parameters:

Inside power supply dimesion: 160mm*110mm*30mm

Outside power supply dimesion: 110mm*70mm*30mm

Rated voltage: ac220v/50hz

Inside power supply: ac 220v/1a

Inside power supply: dc 5v/1a

Contact: amily[at]veecom dot com dot cn

GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.

GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.

GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.




245mm*215mm*50mm