Hydraulic orbit motor BMP BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth. Characteristic Features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or series. * Advanced construction design, high power and low weight. Order Code: Code BMP Displacement 36 50 80 100 125 160 200 250 315 400 500 Flange 22-13.5 Rhomb-flange,pilot 82.58 4-13.5 Rhomb-flange,pilot 82.58 H44-3/8-16 Square-flange,pilot 44.42.8 H54-M10 Square-flange,pilot 44.42.8 Output Shaft AShaft 25,parallel Key 8x7x32 BShaft 32,parallel Key 10x8x45 CShaft 25.4,parallel Key 6.35x6.35x31.75 EShaft 25.4,splined tooth SAE 6B RShort shaft 25.4,parallel key 6.35x6.35x31.75 FShaft 31.75,splined tooth 14-DP12/24 FDLong shaft 31.75,splined tooth 14-DP12/24 GShaft 31.75,parallel Key 7.96x7.96x31.75 TCone-Shaft 28.56,parallel Key B5x5x14 T3Cone shaft 31.75,parallel key 7.96x7.96x25.4 Port and Drain Port DG1/2 Manifold Mount 4xM8, G1/4 MM221.5 Manifold Mount 4xM8, M141.5 S7/8-14 O-ring manifold 4x5/16-18UNC, 7/16-20UNF P1/2-14 NPTF Manifold 4x5/16-18UNC,7/16-20UNF RPT(Rc)1/2 Manifold 4xM8, PT(Rc)1/4 Rotation Direction OmitStandard ROpposite Paint 00No paint OmitBlue BBlack SSilver grey Unusually Function OmitStandard NBig radial force ONo case drain FFree Running LSLow Speed z
STANDARD:IEC60502, SANS1418 VOLTAGE:600/1000V CAPACITY:5000km/week CONSTRUCTION The aerial bundle cables for overhead distribution lines have an insulated or bare neutral messenger made of AAAC, which the insulated aluminum phase conductors are helically wound over it. Cables are rated at 0.6/1kV and conform to IEC 60502 or SANS1418. 1.Phase Conductor The phase conductors shall be of H68 Condition aluminum conductor and circular stranded. 2.Messenger Conductor The neutral messenger conductor shall be of aluminum alloy conductor and circular stranded. 3.Street Lighting Conductor (optional) The street lighting conductors shall be of H68 Condition aluminum conductor and circular stranded. 4.Insulation The phase, messenger and street lighting conductors shall be extruded with cross-linked polyethylene (XLPE) as insulation. 5.The Completed Cable The cable consists of insulated phase and street lighting aluminum conductors, shall be held firmly onto the neutral messenger aluminum alloy conductor in a right-hand(Z) direction of lay. The main advantages of aerial bundle cables include: Ease of erection and stringing Practically no tree-trimming required Less maintenance Relative immunity to short circuits caused by external forces (wind, fallen branches), unless they abrade the insulation. At junction poles, insulating bridging wires are needed to connect non-insulated wires at either side. ABC can dispense with one of these splices. Less risk of a neutral-only break from tree or vehicle damage, increasing safety with TNC-s systems. Electricity theft is made harder and more obvious to detect.
Standard:iec60502, sans1418 Voltage:600/1000v Capacity:5000km/week Construction The aerial bundle cables for overhead distribution lines have an insulated or bare neutral messenger made of aaac, which the insulated aluminum phase conductors are helically wound over it. Cables are rated at 0.6/1kv and conform to iec 60502 or sans1418. 1.Phase conductor The phase conductors shall be of h68 condition aluminum conductor and circular stranded. 2.Messenger conductor The neutral messenger conductor shall be of aluminum alloy conductor and circular stranded. 3.Street lighting conductor (optional) The street lighting conductors shall be of h68 condition aluminum conductor and circular stranded. 4.Insulation The phase, messenger and street lighting conductors shall be extruded with cross-linked polyethylene (xlpe) as insulation. 5.The completed cable The cable consists of insulated phase and street lighting aluminum conductors, shall be held firmly onto the neutral messenger aluminum alloy conductor in a right-hand(z) direction of lay. The main advantages of aerial bundle cables include: Ease of erection and stringing Practically no tree-trimming required Less maintenance Relative immunity to short circuits caused by external forces (wind, fallen branches), unless they abrade the insulation. At junction poles, insulating bridging wires are needed to connect non-insulated wires at either side. Abc can dispense with one of these splices. Less risk of a neutral-only break from tree or vehicle damage, increasing safety with tnc-s systems. Electricity theft is made harder and more obvious to detect.
Electromagnetic Lifter Application Electromagnetic Lifter is suitable for transferring cast ingots, steel balls and kinds of steel scraps. Electromagnetic Lifter Features 1. It adopts a special magnetic circuit design which has large air space and magnetism density. It is made of aluminum wire or copper and the coil protection plate is made of the rolled high Mn steel plate that has good performance of wear-resistance and heat-proof. It also has the characteristics of light weight, low power consumption, high lifting capacity and long serving life. 2. This series has fine insulation structure. The insulation treatments adopt the vacuum drying & glue filling, which has improved the electrical and mechanical performance of the coils .The insulation grade can reach class special C. 3. It generally adopts the control mode of constant voltage. It can further improve the lifting capacity if changing to adopt the control mode of over excitation. 4. With simple structure reliability, it is suitable for working with all kinds of lifting equipment. Electromagnetic Lifter Classification MW84 series is specially designd for lifting and transporting medium-thick steel plate .The whole operation is safe, exact and quick , when transport some long plates they easily go disto rtion, so we advice combination of multiple units to be used. For some plate which thickness is around the range of 6mm-32mm, space between 2 magnets should leave an extra 2.5-3.5m, the length at each end is that of one half of space.According to different lifting pieces, the series is divided into type 350 and type 400 and type 500 and type 650.Type 350 is suitable for medium-thick plate factory, ship building factory, machinery manufacturing factory, it is controlled by adjustable magnetic field, and can lift one or certain pieces of plates. Type 400 is suitable for lifting as many as possible pieces at a time ; We can also produce the product less than 700°c ( high temperature type) for you. MW5 series magnet chuck is an electromagnetic principle, by internal coils generate magnetic force, through magnetic panel, the contact surface of the workpiece panel tightly sucked through the coil power, the magnetic force disappears achieve demagnetization, remove the piece of principle the production of a machine tool accessories. Packaging & Shipping 1. Delivery time Within 10 business day after the receipt of deposit. 2. Packaging Wood case for electric parts, accessories;large sections will be loaded onto bulk cargo ship after packing. 3. Payment terms FOB, CFR and CIF are common trade terms. We can accept payment terms: TT, L/C, west unit, DUP, DUA and other. 4. Installation the installation team can be sent to local site to install for customer. 5.Warranty We'll be responsible for maintenance if our product itself has quality problem during one year after receiving. z
hydraulic filter DP602EA01V/-W Precision filter YOYIK, located in the famous industrial city of Deyang, is a leading manufacturer of steam turbines, coal-fired generators and hydropower equipment parts. Relying on rigorous national standards, strong technical force, advanced equipment and scientific management, the company provides a full range of solutions from electrical equipment to hydraulic machinery. Cooperating with hundreds of power plants at home and abroad, YOYIK has demonstrated first-class products and services in technical transformation and overhaul projects, and has won wide market praise. Yoyik can offer many spare parts for power plants as below: #DF-hydraulic filter DP602EA01V/-W Precision filter-DF industrial filter solutions QF6803GA20H1.5C oil feeder filter ss cartridge filter DR405EA01V/F cross reference hydraulic filter WU-1000*100-J ac oil filter SDGLQ-25T-36K hydraulic oil filtration 0060D010BN3HC oil filter cross reference ZU-H160*5S hydraulic filter block FBX(TZ)-800*10 Hydraulic filter element HX-10*3Q-Z oil filter plug Q2UI-A25*20S air filter cost BDE1000S2W2.X/-RV0.02 hydraulic filter efficiency SQCQX-200*10F10 china cartridge filter DL009001 regeneration device Precision filter lube oil filter element SKX-250*20 021 inlet filter oem oil filter HH9664S24KSUBR24DC hydraulic tank filters TZX2-400*20 vertical filter press LXM15-11.5 lube filtration hydraulic filter housing assembly P164378 Filter element of HFO oil tank oil filter cross YWU-630*100-J cheap oil filters SDGLQ-6T-100K hydraulic filter company HX-10*10Q2 High pressure filter lube oil and filter change XJL-01-12 Filter Assembly find my oil filter WU-H400*180FS hydraulic oil filter pump with cart 0110D010ON oil tank filter YQ2U-A25*10S replacement filter DQ8302GA1H3.5C FILTER ELEMENT FOR LUB OIL FILTER industrial oil strainer HX-100*5 ST LUBE OIL FILTER stainless steel membrane filter HX-800*20W Fuel oil filter hydraulic oil filter company SFX-950*30 Coarse filter hydraulic filter crossover interchange ZL-63*100 hydraulic filter DP602EA01V/-W Precision filter MY-DFYL-2024-6-13
Hydraulic orbit motor BMT BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications. Characteristic Features: *Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable operation and high efficiency. *The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications. *Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation. Order Code: z Code Remarks BMT BMTS? Displacement 160 200 250 315 400 500 630 800? Flange 4 4-14 Square-flange160,pilot1259 BMT K6 4-14.5Square-flange162,pilot1279 W 4-18 Wheel-flange200,pilot1607 D 4-14 Circle-flange 160,pilot 1258 BMTS E 4-14.5 Square-flange 162, pilot 12710 Output Shaft M Shaft 40,parallel key 12870 BMT G Shaft 38.1,parallel key 9.529.5257.15 F Shaft 38.1,splined tooth 17-DP12/24 FD Shaft 38.1,splined tooth 17-DP12/24 T Cone-shaft 1:10 45,parallel key B12828 T1 Cone-shaft 1:8 45,parallel key 11.1311.1331.75 SL shaft 34.85,Splined key,Splined key 6-34.8528.148.64 G1 shaft31.75,parallel key 7.967.9640 F1 Shaft 31.75,splined tooth 14-DP12/24 Omit Short shaft 16-DP12/24 BMTS Port and Drain Port D G3/4 Manifold Mount,4-M10 , G1/4 M M272 Manifold Mount,4-M10, M141.5 S 1-1/16-12UN O-ring, 9/16-18UNF S1 1-1/16-12UN O-ring, 7/16-20UNF G G3/4,G1/4 M3 M272,M141.5 Rotation Direction Omit Standard R Opposite Paint 00 No paint Omit Blue B Black S Silver grey Unusually Function Omit Standard LL Low Leakage F Free Running LS Low Speed
Power plant shut-off valves WJ80F3.2P YOYIK has been deeply involved in the field of power plant spare parts manufacturing for many years, taking technological innovation as the core driving force, and constantly launching new products to adapt to market changes. The company not only has advanced production equipment, such as CNC lathes, machining centers, etc., but also has established a strict quality management system to ensure that every product shipped meets the highest industry standards. From turbines to coal-fired generators, YOYIK's products are widely used in many key engineering projects at home and abroad, contributing to the sustainable development of the energy industry. Our company can provide replacement parts for various power facilities, as follows: #DF-Power plant shut-off valves WJ80F3.2P-DF 3v solenoid valve CCS230D Lubricating oil transfer pump 2CY-18/0.36 Turbine system latch solenoid valve 4WE10Y33/CW230N9K4 pressure hose S100-AC-FB-0100 installation screen by switching piece JL1-2.5/2 Seal retaining ring 4Pcs // spacer ring P19182D-00 P19182D-00 triple piece AC20-N02CG-Z-A condensate pump in power plant CZ50-250 CV actuator piston rod oil sealing ring HY.SO.0077.V Switching valve S0A1F-10 The electromagnetic valve 4WE6D-EG220N9K4-V/220VAC centrifugal fan RG130/0800-3612-011111 oil seals 32 x 37 x 2.5 mm Thk pressure hose S110-AC-FB-0125 Packing as-stop valve KHWJ10F1.6P Trip module accumulator NXQ-A-1.6/31.5-L-Y ball valve BKH20-FRM-1.4571-DN16 Card sleeve type cylinder joint DFHTXRJT-040 pressure hose S100-AC-FA-0250 AC explosion-proof motor YB2-100L1-4/2.2KW/380V/1420r/min servo control valve SM4-20(20)76-80/40-10-S10 servo valve YGZ13B Butterfly valve oil engine sealing ring �?22.5*2 safety valve 4-5A25 hydraulic variable vane pump F3-SV10 servo valve amplifier 0508.963T0101.AW036 lubrication pump price 125LY23-4 accumulator charging kit NXQA-B40/31.5L-K The electromagnetic valve 4WE10Y-L3X/CW220-50NZ4/V gear box reducer M02225.OBMCC1D1.5A best budget water cooling pump 100-80-160 O-ring rubber seal 45*4-G-S-GB/T3452.1 Nut cap FAID56-03-13 metal shut off valve 10FWJ1.6P pump Recirculating solenoid valve D12T11G0P 110VDC 8W 3-10bar lock line �?1.0*8m\516000002 Power plant shut-off valves WJ80F3.2P Power plant shut-off valves WJ80F3.2P MY-DFYL-2024-7-31
vacuum pump (without motor) KZ100-WS YOYIK has been deeply involved in the field of power plant spare parts manufacturing for many years, taking technological innovation as the core driving force, and constantly launching new products to adapt to market changes. The company not only has advanced production equipment, such as CNC lathes, machining centers, etc., but also has established a strict quality management system to ensure that every product shipped meets the highest industry standards. From turbines to coal-fired generators, YOYIK's products are widely used in many key engineering projects at home and abroad, contributing to the sustainable development of the energy industry. Our company can provide replacement parts for various power facilities, as follows: #DF-vacuum pump (without motor) KZ100-WS-DF 3v solenoid valve CCS230D Lubricating oil transfer pump 2CY-18/0.36 Turbine system latch solenoid valve 4WE10Y33/CW230N9K4 pressure hose S100-AC-FB-0100 installation screen by switching piece JL1-2.5/2 Seal retaining ring 4Pcs // spacer ring P19182D-00 P19182D-00 triple piece AC20-N02CG-Z-A condensate pump in power plant CZ50-250 CV actuator piston rod oil sealing ring HY.SO.0077.V Switching valve S0A1F-10 The electromagnetic valve 4WE6D-EG220N9K4-V/220VAC centrifugal fan RG130/0800-3612-011111 oil seals 32 x 37 x 2.5 mm Thk pressure hose S110-AC-FB-0125 Packing as-stop valve KHWJ10F1.6P Trip module accumulator NXQ-A-1.6/31.5-L-Y ball valve BKH20-FRM-1.4571-DN16 Card sleeve type cylinder joint DFHTXRJT-040 pressure hose S100-AC-FA-0250 AC explosion-proof motor YB2-100L1-4/2.2KW/380V/1420r/min servo control valve SM4-20(20)76-80/40-10-S10 servo valve YGZ13B Butterfly valve oil engine sealing ring �?22.5*2 safety valve 4-5A25 hydraulic variable vane pump F3-SV10 servo valve amplifier 0508.963T0101.AW036 lubrication pump price 125LY23-4 accumulator charging kit NXQA-B40/31.5L-K The electromagnetic valve 4WE10Y-L3X/CW220-50NZ4/V gear box reducer M02225.OBMCC1D1.5A best budget water cooling pump 100-80-160 O-ring rubber seal 45*4-G-S-GB/T3452.1 Nut cap FAID56-03-13 metal shut off valve 10FWJ1.6P pump Recirculating solenoid valve D12T11G0P 110VDC 8W 3-10bar lock line �?1.0*8m\516000002 vacuum pump (without motor) KZ100-WS vacuum pump (without motor) KZ100-WS MY-DFYL-2024-7-29
direct solenoid valve 4WE6Y-L6X/EG220NZ4-V/B08 for Satpura power YOYIK has been deeply involved in the field of power plant spare parts manufacturing for many years, taking technological innovation as the core driving force, and constantly launching new products to adapt to market changes. The company not only has advanced production equipment, such as CNC lathes, machining centers, etc., but also has established a strict quality management system to ensure that every product shipped meets the highest industry standards. From turbines to coal-fired generators, YOYIK's products are widely used in many key engineering projects at home and abroad, contributing to the sustainable development of the energy industry. Our company can provide replacement parts for various power facilities, as follows: #DF-direct solenoid valve 4WE6Y-L6X/EG220NZ4-V/B08-DF 3v solenoid valve CCS230D Lubricating oil transfer pump 2CY-18/0.36 Turbine system latch solenoid valve 4WE10Y33/CW230N9K4 pressure hose S100-AC-FB-0100 installation screen by switching piece JL1-2.5/2 Seal retaining ring 4Pcs // spacer ring P19182D-00 P19182D-00 triple piece AC20-N02CG-Z-A condensate pump in power plant CZ50-250 CV actuator piston rod oil sealing ring HY.SO.0077.V Switching valve S0A1F-10 The electromagnetic valve 4WE6D-EG220N9K4-V/220VAC centrifugal fan RG130/0800-3612-011111 oil seals 32 x 37 x 2.5 mm Thk pressure hose S110-AC-FB-0125 Packing as-stop valve KHWJ10F1.6P Trip module accumulator NXQ-A-1.6/31.5-L-Y ball valve BKH20-FRM-1.4571-DN16 Card sleeve type cylinder joint DFHTXRJT-040 pressure hose S100-AC-FA-0250 AC explosion-proof motor YB2-100L1-4/2.2KW/380V/1420r/min servo control valve SM4-20(20)76-80/40-10-S10 servo valve YGZ13B Butterfly valve oil engine sealing ring �?22.5*2 safety valve 4-5A25 hydraulic variable vane pump F3-SV10 servo valve amplifier 0508.963T0101.AW036 lubrication pump price 125LY23-4 accumulator charging kit NXQA-B40/31.5L-K The electromagnetic valve 4WE10Y-L3X/CW220-50NZ4/V gear box reducer M02225.OBMCC1D1.5A best budget water cooling pump 100-80-160 O-ring rubber seal 45*4-G-S-GB/T3452.1 Nut cap FAID56-03-13 metal shut off valve 10FWJ1.6P pump Recirculating solenoid valve D12T11G0P 110VDC 8W 3-10bar lock line �?1.0*8m\516000002 direct solenoid valve 4WE6Y-L6X/EG220NZ4-V/B08 direct solenoid valve 4WE6Y-L6X/EG220NZ4-V/B08 MY-DFYL-2024-7-2
Product Intruction The Double girder bridge crane is used widely in factory, workshop, mining field, warehouse, etc for general loading, unloading and transporting service, suitbale used for steel plant, machine manufacture and assembly workshops, metallurgy workshop and continuous production line. Specification * Lifting capacity: 0 - 500 ton * Span: 10.5 m~31.5 m * Lifting Height: 7.5 m -32 m * Working Duty: A3-A8 * Power Supply: 380V, 50Hz, 3 phase or 1 phase * Control Method: Ground control, Remote control * CertificationL: ISO, CE, SGS * OEM & ODM: Accepted Safety system 1. Traveling and lifting limit switch 2. Overload protection device 3. Voltage lower protection 4. Emergency stop function 5. Sound and light alarm 6. Polyurethane buffer and long service bearing 7. Rain cover for hoist, driving and electrical device Product classification QD type double girder overhead crane * Capacity: from 5ton to 50ton * Span: 10.5m to 31.5m * Working grade: A5-A6 * Working temperature within -25 to +40 centigrade * Control model: cabin room, remote control and both LH type double girder electric hoist overhead crane * Capacity: from 5ton to 32ton * Span: 7.5m to 25.5m * Working grade: A3-A5 * Working temperature within -25 to +40 centigrade. * Control model: cabin room, remote control and both YZ type doubel girder Foundry overhead crane Lifting capacity:5ton-320/80toon Working temperature: -10°~60° Working duty: A7 Application: pouring melted iron, lifting molten steel and so on Control model: cabin room, remote control and both European type double girder overhead crane * Capacity: from 5ton to 500ton * Span: 7.5m to 32m * Work duty: A5-A7 * Appication: lifting goods or materials in plants,warehouses,materials stocks * Features: Smooth starting and stopping,low noise, commodious cabin and good view QC type electromagnetic double girder overhead crane * Capacity: from 5ton to 50ton * Span: 10.5m to 31.5m * Work duty: A6 * Appication: load and unload metallic materials such as steel plate, scrap iron, and so on * Features:Strong absorption force, perfect performance, low maintenance QZ type double girder overhead crane with grab * Capacity: from 5ton to 20ton * Span: 10.5m to 31.5m * Work duty: A6. * Appication: loading goods in port,factory,workshop and power plant * Control model: cabin room, remote control and both Packaging & Shipping MOQ: 1 Set Overhead Crane Price Port: Shanghai, Tianjing, Ningbo Payment: L/C, T/T, Western or according to your requirements Delivery Time: Within 20 days after receiving your deposit Packaging: PE foam, plywood case Shipping: By sea, by land or according to your requirments z
Multimasz company offers a new, original, electromagnetic toothed clutches zf ek 0, 5 z, 1 z, 2 dz, 2 dbz, 5 dz, 5 dbz, 10 dz, 10 ez, 10 ebz, 20 dz, 20 dbz, 20 ez, 20 ebz, 40 dz, 40 ebz, 60 dz, 60 dbz, 80 z, 80 bz, 120 ez, 120 ebz. We offer as well zf clutches: Ek, eb-ef, eb-er, ebd, ek-er, ekd, ekr, ekf, ekn, ek..Bzs ...Ek..Z, ek..Dz, ekr..Z, ekr..Zs In our offer we have constantly a wide range of following clutches: Heid Mc, fosms, mtkm, msbm, mbm, muob, fuobm, fov, lkcf, fmv, fm, fmo, fmok, fc, lcwa, lcf, lcw, lms, fmob, lmoba, fzv, fznd, mzz, mlz, foz, mzoul, hlws, hlw, hlok, hldbw, hzv/pzv ... Ema-dessau 3kl 1, 25; 2, 5; 5; 10; 20; 40; 80; 4kl 1, 25; 2, 5; 5; 10; 20; 40; 80; kldx 0, 63; 1, 25; 2, 5; 5; 10; 20; 40; 80; kldo 0, 63; 1, 25; 2, 5; 5; 10; 20; 40; 80 Stromag N, w, l, f, ld, nd, fd, sw, sn, sf, eke, esd, emd, efl, erd, ede, eln, efk, emb, zaa, zba, zcb, zdb, zea, zgb, eza, ezb, ezd, eze, ezl, ezm, ezx, ede, e, kmk, kre, krd ... Binder magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105c0, 76 3705c0, 76 13111c00, 77 500..A15, 76 13106h00, 76 13706h00, 76 13113a00, 76 26e..B00, 76 26g..B00, 76 26n..B00, 76 26p..B00, 76 43108h00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... Fumo Etm-...2, etm-...4, e2m-...4, vep-...T, ver-...S, vba, vep-...B, vab-..., vag-..., vhp-80, esm1-..., esm3-..., esm5-..., esm15-...-a, esm15-...-b, ezm1-..., ezm2-..., ezm3-..., ezm4-..., vet-..., hlt, vep-..., Moreover: We offer different spare parts for clutches & brakes: Brush holders for dry & oil operation, Brake & clutch discs /steel or friction discs/, Levers, clutch drivers, coils. -
3. Main technical parameters 3.1. Y-axis movement range: 130mm 3.2. X-axis movement range: 150mm 3.3. Spacing between two marking columns: 270mm 3.4. XY axis drive method: electric drive 3.5. Z-axis click method: motor driven 3.6. Click power: 500gf or customize weights according to customer requirements. 3.7. Striking force: 500gf or customized weights according to customer requirements. 3.8 Click speed: 10-100 times/minute 3.9. Scratch speed: 30-2000mm/min 3.10. XY torque: 8.0Nm 3.11 Testing station (linkage): 2 3.12 Control functions: A. Digitally set running speed (X/Y/Z axis) B. Digitally set running displacement (X/Y axis) C. Counting value display setting: 0~999999, any setting, power off memory D. Line drawing method: long (square), straight line. 3.13. Shutdown method: automatic shutdown by counting values 3.14. Working voltage: 220VAC 50HZ 3A 3.15. W780 * D570 * H520mm 2ã?? Instrument Introduction 2.1 Product Usage Click marking tester is a special testing device for small consumer electronic products such as e-books, tablet computers, mobile phones, walkie-talkies and Electronic dictionary. It mainly performs durability tests on hand written screens and touch screens, such as grid drawing, clicking, and rubbing. 2.2 Equipment characteristics Using PLC control, simply select a starting point on the screen of the product to be tested, and then set the testing stroke in the device to run. This machine can perform four modes of testing: X-line, Y-axis line, XY axis square or rectangular, and Z-axis click. And it uses a stepper motor combined with a ball screw as the motion mechanism, with accurate positioning, high accuracy, and low noise; Long lasting and durable.
Years of R&D and production experience;including the lastest cutting &milling technology;various kinds of crossbeam width adn travel distance . With the help of high-power spindle and X/Y/Z servo motor ,Doubke Column Machining Center ca be used in automobile mold ,olastic mold and other high-precision parts processing industr. X/Y/Z Axis roller tpe slider for higher loading capacity ,higher position accuracy &repeated position accuracy and rigidity. Component 90° spindle: 5-face maching Gerbox :High torque spindle motor (6000RPM)with two different speed gearbox for low -speed heavy cutting and high-speed finishing cutting .. Gear-type -spindle :International brand long-nose spindle (600rpm)for high-speed and low -speed cutting. International brand balance weight oil gydraulic system Step-type beam Planetary Gear:X axis transmissio system :international brand high precision planetary gearbox for excellent rigidity and accuracy when moving. Technical characteristics : FC-300 iron casting body with special treatment for stress relieving ,no deforamtion after long-term working . Crossbeam with high rigidity ,stability and precision :Slope and Multiple-level Design,Bix -type casting and integrated rib structure . One-piece casting for headstock ;X/Y/Z Axis with high torque servo motor and direct transmission to improve processing efficiency and reliability. High horsepower spindle motor (6000rpm) with two different speed gearbox for low-speed heavy cutting and high-speed finishing cutting .. X axis transmission system :high-precision planetary gearbox structure ;to avoid the belt transmission torque loss Spindle ,bearing and gearbox use forced cooling system to reduce the heat deformation adn improve the life span and precision of the spare parts.
Multimasz company offers a new and original, electromagnetic multi-disc clutch Ema Dessau 3 KL 10; as well as 3KL: 1,25; 2,5; 5; 20; 40; 80; In our offer you can find other types of Ema Dessau clutches: 4KL1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; KLDO 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; 160. Herewith you will find also the clutches of following manufacturers: Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Stromag N, W, L, F, LD, ND, FD, SW, SN, SF, EKE, ESD, EMD, EFL, ERD, EDE, ELN, EFK, EMB, ZAA, ZBA, ZCB, ZDB, ZEA, ZGB, EZA, EZB, EZD, EZE, EZL, EZM, EZX, EDE, E, KMK, KRE, KRD Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... Beside this we offer various spare parts for clutches & brakes: brush holders for dry & oil operation, brake & clutch discs (steel or friction discs), clutch drivers, coils and levers. It has to be also mentioned that we have a huge stock of spare parts, accessories and equipment for machine tools. We can also produce machine parts according to customersâ?? drawings, or repair their old ones. Please visit our website. z
We are pleased to offer you a new, electromagnetic multi-disc clutch Ema Dessau KLDO 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; 160. In our offer you can find other types of Ema Dessau clutches: 3KL1,25; 2,5; 5; 10; 20; 40; 80; 4KL1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; Herewith you will find also the clutches of following manufacturers: Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Stromag N, W, L, F, LD, ND, FD, SW, SN, SF, EKE, ESD, EMD, EFL, ERD, EDE, ELN, EFK, EMB, ZAA, ZBA, ZCB, ZDB, ZEA, ZGB, EZA, EZB, EZD, EZE, EZL, EZM, EZX, EDE, E, KMK, KRE, KRD Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... It has to be also mentioned that we have a huge stock of spare parts, accessories and equipment for machine tools. We can also produce machine parts according to customersâ?? drawings, or repair their old ones. Please visit our website. Beside this we offer various spare parts for clutches & brakes: brush holders for dry & oil operation, brake & clutch discs (steel or friction discs), clutch drivers, coils and levers. z
Multimasz company offers a new, original, electromagnetic multi-disc clutch Stromag ELN 2S, 5S, 10S,16S, 25S, 41S, 64S, 100S; as well as other Stromag clutches and brakes: EDE 1 S, 2 S, 4 S, 6 S, 10 S, 16 S, 25 S, 41 S, 64 S, 100 S, 161 S; EKE 1 S, 2 S, 4 S, 6 S, 10 S, 16 S, 25 S, 41 S, 64 S, 100 S, 161 S; EFK 10S, 16S, 25S, 41S, 64S, 100S; EMD 2, 5, 10, 16, 25, 40, 63, 100, 160; ESD 2, 5, 10, 16, 25, 40, 63, 100, 160; ERD 2, 5, 10, 16, 25, 40, 63, 100, 160, 250; EMB 2, 5, 10, 16, 25, 40, 63, 100, 160; EZE 2, 5, 10, 16, 25, 40, 63, 100. z Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Ema-Dessau 3KL 1,25; 2,5; 5; 10; 20; 40; 80; 4KL 1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; KLDO 0,63; 1,25; 2,5; 5; 10; 20; 40; 80 ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... Furthermore we offer: brush holders for dry & oil operation,p brake & clutch discs (steel or friction discs), levers, clutch drivers and coils. We provide you both the highest quality and the competitive prices.
Multimasz company offers new, original, electromagnetic multiple-disc clutch Ema Dessau KLDO 5; and other KLDO clutches: 0,63; 1,25; 2,5; 10; 20; 40; 80; 160. In our offer you will find following Ema Dessau clutches: 3KL1,25; 2,5; 5; 10; 20; 40; 80; 4KL1,25; 2,5; 5; 10; 20; 40; 80; KLDX 0,63; 1,25; 2,5; 5; 10; 20; 40; 80; In our warehouses we have a huge stock of completely new, original clucthes and brakes of the most recognizable manufacturers: Heid MC, FOSMS, MTKM, MSBM, MBM, MUOB, FUOBM, FOV, LKCF, FMV, FM, FMO, FMOK, FC, LCWA, LCF, LCW, LMS, FMOB, LMOBA, FZV, FZND, MZZ, MLZ, FOZ, MZOUL, HLWS, HLW, HLOK, HLDBW, HZV/PZV ZF EK, EB-EF, EB-ER, EBD, EK-ER, EKD, EKR, EKF, EKN Stromag N, W, L, F, LD, ND, FD, SW, SN, SF, EKE, ESD, EMD, EFL, ERD, EDE, ELN, EFK, EMB, ZAA, ZBA, ZCB, ZDB, ZEA, ZGB, EZA, EZB, EZD, EZE, EZL, EZM, EZX, EDE, E, KMK, KRE, KRD Fumo ETM-...2, ETM-...4, E2M-...4, VEP-...T, VER-...S, VBA, VEP-...B, VAB-..., VAG-..., VHP-80, ESM1-..., ESM3-..., ESM5-..., ESM15-...-A, ESM15-...-B, EZM1-..., EZM2-..., EZM3-..., EZM4-..., VET-..., HLT, VEP-..., Binder Magnete 86 611..H00, 86 621..H00, 76 461..A00, 76 451..A00, 76 13105C0, 76 3705C0, 76 13111C00, 77 500..A15, 76 13106H00, 76 13706H00, 76 13113A00, 76 26E..B00, 76 26G..B00, 76 26N..B00, 76 26P..B00, 76 43108H00... Ortlinghaus 0-100, 0-300, 0-010, 0-011-05, 0-011-100, 0-011-300, 0-006, 0-008-10, 0-009, 0-012, 0-013, 0-023, 0-123, 0-021-007, 0-021-3.3, 0-002, 0-600-424, 0-600-474, 0-600-070, 0-600-072, 0-700, 0-420, 0-406, 0-400, 0-442... We offer different spare parts for clutches & brakes: brush holders for dry & oil operation, brake & clutch discs /steel or friction discs/, levers, clutch drivers, coils. It has to be also mentioned that we have a huge stock of spare parts, accessories and equipment for machine tools. We can also produce machine parts according to customersâ?? drawings, or repair their old ones. Please visit our website. z
1.Brief introductions of ZDY-1250 full hydraulic tunnel drilling rig ZDY-1250 hydraulic tunnel drilling rig is used for coal mine: Z stands for drilling rig; D stands for tunnel; Y stands for hydraulic driven, and 1250 is the maximum output torque of 1250n. m. 2.Applications of ZDY-1250 full hydraulic tunnel drilling rig ZDY1250 tunnel drilling rig is mainly used for drilling holes of gas pumping (row), grouting hole, water injection hole, anti process and pressure relief hole, geological exploration hole and other engineering drilling holes. Drilling rig can drill holes in the range of azimuth and dip angle specified in the basic parameter table. 3.Specifications of ZDY-1250 full hydraulic tunnel drilling rig Project Unit ZDY-1250 Maximum drilling depth m 200 Open hole diameter mm Ф87/Ф115 End hole diameter mm Ф65/Ф75 Drilling pipe diameter mm 50 Drilling angle ° -90-+90 Rated output rotating speed r/min 80/170 Rated output torque n.m 1250/600 Rated power kw 22 Rated voltage v 380/660 Rated current a 42.5/24.5 Feeding force kn 60 Pullout force kn 45 Anchorage force kn 4*45 Rated advance speed m/min 0-1.5 Feed stroke mm 850 Hardness range (protodyakonov scale of hardness) f�10 Noise db(a) �92 Main engine dimension (long*width*high) mm 2240*1000*1478 Total weight (without drill rod) kg 1820 Shandong Master Machinery Group Co.,Ltd. Sales Manager:Coco Yan Tel:0086-537-2335787 Mob: 0086-18865479508 Wechat:008618865479508 Whatsapp:008618865479508 QQ:2648769002 E-mail:sale05@huaxiamaster.com Website:www.huaxiamaster.com
Product Details 3.1 Key Specifications/Special Features Function Rated input voltage * Relay output Model Phase sequence and phase loss monitoring 3-phase, 3-wire 220 to 440 VAC Relay: 1 NC,1 NO TVR-2000B 3-phase, 3-wire 380 to 660 VAC Relay: 1 NC,1 NO TVR-2000C * The power supply voltage is the same as the rated input voltage. Ratings Rated input voltage 3-phase, 200 to 440 VAC (3-wire) Input load Approx. 2.6 VA Operating time Phase sequence 1 s±0.05 s Phase loss 0.1 s max. (when the voltage changes rapidly from 100% to 0% of rated voltage) Indicators LED Normal: Green light; phase loss: Red light; Inverted: Yellow light Output form Relay Output: SPDT contact Output relay ratings Rated load Resistive load 5 A at 250 VAC 5 A at 30 VDC Maximum switching capacity: 1,250 VA, 150 W Minimum load: 5 VDC, 10 mA (reference values) Mechanical life: 10 million operations min. Electrical life: 5 A at 250 VAC or 30 VDC:50,000 operations 3 A at 250 VAC/30 VDC:100,000 operations Ambient operating temperature -20 to 60°C (with no condensation or icing) Storage temperature -25 to 65°C (with no condensation or icing) Ambient operating humidity 25% to 85% RH (with no condensation) Storage humidity 25% to 85% RH (with no condensation) Altitude 2,000 m max. Applicable wires Stranded wires, solid wires, or ferrules Applicable wire size 0.25 to 1.5 mm2 (AWG24 to AWG16) Wire insertion force 8 N max. for AWG20 wire Screwdriver insertion force 15 N max. Wire stripping length 8 mm Ferrule length 8 mm Current capacity 10 A (per pole) Number of insertions 50 times Weight Approx.55g Mounting Mounts to DIN Track, or screw mounting Dimensions 30 Ã? 60 Ã?70 mm (WÃ?DÃ?H) Specifications Input frequency range 50 to 60 Hz Phase loss detection level 80%±10% of rated input Calculation Formula = 1 â?? ((Highest phase-to-phase voltage â?? Lowest phase-to-phase voltage)/ Average three-phase phase-to-phase voltage) Applicable standards Conforming standards EN 60947-5-1 Installation environment (pollution level 2, Overvoltage category III) EMC EN 60947-5-1 Insulation resistance 20 MΩ min. Between external terminals and case Between input terminals and output terminals Dielectric strength 2,000 VAC for one minute Between external terminals and case Between input terminals and output terminals Impulse withstand voltage 6 kV (between live terminals and exposed, non-charged metal parts) Vibration resistance Frequency: 10 to 55 Hz, 0.35-mm single amplitude 10 sweeps of 5 min each in X,Y, and Z directions Shock resistance 100 m/s2, 3 times each in 6 directions along 3 axes Degree of protection Terminals: IP20 -
Key Specifications/Special Features Ratings Power supply voltage Power consumption 24 VAC/DC: 1.8 VA/1 W max. 100 to 240 VAC: 2.5 VA max. Rated insulation voltage 600 VAC Operating value setting range (SV) 10% to 100% of maximum setting range Operating value 100% operation at set value Reset value setting range (HYS) 5% to 50% of operating value Reset method Note:Manual reset: Turn OFF power supply for 1 s or longer. Operating time setting range (T) 3to8 s Indicators Normal : Green light; Overvoltage Undervoltage : Yellow light Output form one Normally open and one normally closed Output relay ratings Rated load 5 A at 250 VAC (Resistive load) 5 A at 30 VDC (Resistive load) 1 A at 250 VAC (Inductive load) 0.2 A at 48 VDC (Inductive load) Minimum load: 5 VDC, 10 mA (reference values) Mechanical life: 10 million operations min. Electrical life: 5 A at 250 VAC or 30 VDC: 50,000 operations 3 A at 250 VAC or 30 VDC: 100,000 operations Ambient operating temperature -20 to 60°C (with no condensation or icing) Storage temperature -25 to 65°C (with no condensation or icing) Ambient operating humidity 25% to 85% RH (with no condensation) Storage humidity 25% to 85% RH (with no condensation) Altitude 2,000 m max. Applicable wires Stranded wires, solid wires, or ferrules Applicable wire size 0.25 to 1.5 mm2(AWG24 to AWG16) Wire insertion force 8 N max. for AWG20 wire Screwdriver insertion force 15 N max. Wire stripping length 8 mm Ferrule length 8 mm Current capacity 10 A (per pole) Weight Approx. 60 g Mounting Mounts to DIN Track Dimensions 30 � 60 �76 mm (W�H�D) Specifications Conforming standards EN 60947-5-1 Installation environment (pollution level 2, Overvoltage category III) Insulation resistance 20 MΩmin. Between external terminals and case Between power supply terminals and input terminals Between power supply terminals and output terminals Between input terminals and output terminals Dielectric strength 2,000 VAC for one minute Between external terminals and case Between power supply terminals and input terminals Between power supply terminals and output terminals Between input terminals and output terminals Impulse withstand voltage 6 kV (between live terminals and exposed, non-charged metal parts) Vibration resistance Frequency: 10 to 55 Hz, 0.35-mm single amplitude 10 sweeps of 5 min each in X,Y, and Z directions Shock resistance 100 m/s2, 3 times each in 6 directions along 3 axes Degree of protection Terminals: IP20 -
