Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16
Function of the incorporated valve
Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.
Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
We produce the products match with the OEM number of all machines.
1. The same function of the 101 series
2. Including integrated valve (relief valve and checkproof valve)
3. Replace Danfoss (ospc), M+S (HKU/4) series.
4.101S Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
5.We produce the products match with the OEM number of all machines.
Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93 C
Recommended oil filtration--------ISO 19/16
1.Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
2.We produce the products match with the OEM number of all machines.
Product Description
060 integral series power steering units
060 series PSU incorporated the inlet check valve, safety valve, internal check valve, cylinder port shock valve and anti-cavitation valve. The design is more compact and convenient.
Features
Incorporated five valves into the PSU, So it is more compact and convenient
Low hydraulic noise
Special casting design for low pressure drop.
3 basic systems-open center, closed center and load sensing
Displacement: 50~500 ml/r
Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16
Function of the incorporated valve
Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.
Hydraulic steering unit is widely used in the steering control system
such as the steering system of many kinds of industrial and agricultural
mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.
We produce the products match with the OEM number of all machines.
Hydraulic steering unit applications:
Construction Machinery
Agriculture Machinery
Heavy-Duty Equipment
Forestry Machinery
Mining Equipment
1. The same function of the 101 series
2. Including integrated valve (relief valve and checkproof valve)
3. Replace danfoss (ospc), m+s (hku/4) series.
4.101s hydraulic steering unit is widely used in the steering control system
Such as the steering system of many kinds of industrial and agricultural
Mobile machinery forklift, loader, roadroller, tractor, comebine harvester, etc.
5.We produce the products match with the oem number of all machines
BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4
Type
Max.inlet pressure
BMM8-50 Cont. 17.5
(Mpa) Int. 22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
Basic Info.
Attribute Attribute value
Model NO BMM
Power Hydraulic
Export Markets Global
Structure Hydraulic motor,orbital hydraulic motor
Material Cast iron
OEM Accept
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE
HANJIU
HYDRAULIC M+S
HYDRAULIC EATON
CHAR LYNN DANFOSS ROSS
TRW WHITE
CROSS PARKER SAM
BREVINI BOSCH
RECROTH
BMM MM MLHK J SERIES OMM
BGM MGX
BMP/BM1 MP HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP
BMR/BM2 MR HR MLHRW,RW S,T SERIES W SERIES OMR DS OMEW MB WR RE TF BR MGR GMR
BMH/BM4 MH MLHH HW HWF
OMH ME RE TG
BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS
BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ
*advanced manufacturing devices for the gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*shaft seal can bear high pressure of back and the motor can be used in parallel or series.
*special design in the driver-linker and prolong operating life.
*special design for distribution system can meet the requirement of low noise of unit.
*compact volume and easy installation
Omh hydraulic motor main specifiction:
Type
Bmh
200
Bmh
250
Bmh
315
Bmh
400
Bmh
500
Displacement
(cc/rev)
203.2255.9316.5406.4489.2
Max torque
(n.M)
Cont510621740850830
Int439348282220184
Max pressure
(mpa)
Cont17.517.517.515.512.5
Int2020201916
Max speed rate
(rpm)
Cont366290236183155
Int439348282220184
Max flow
(l/min)
Cont7575757575
ADVANCED MANUFACTURING DEVICES FOR THE GEROLOR GEAR SET, WHICH USE LOW PRESSURE OF START-UP,PROVIDE SMOOTH, RELIABLE OPERATION AND HIGH EFFICIENCY.
SHAFT SEAL CAN BEAR HIGH PRESSURE OF BACK AND THE MOTOR CAN BE USED IN PARALLEL OR SERIES.
SPECIAL DESIGN IN THE DRIVER-LINKER AND PROLONG OPERATING LIFE.
SPECIAL DESIGN FOR DISTRIBUTION SYSTEM CAN MEET THE REQUIREMENT OF LOW NOISE OF UNIT.
COMPACT VOLUME AND EASY INSTALLATION
OMH HYDRAULIC MOTOR MAIN SPECIFICTION:
TYPE,
BMH
200
BMH
250
BMH
315
BMH
400
BMH
500
DISPLACEMENT
(CC/REV)
203.2,255.9,316.5,406.4,489.2
MAX TORQUE
(N.M)
CONT,510,621,740,850,830
,INT,439,348,282,220,184
MAX PRESSURE
(MPA)
CONT,17.5,17.5,17.5,15.5,12.5
,INT,20,20,20,19,16
MAX SPEED RATE
(RPM)
CONT,366,290,236,183,155
,INT,439,348,282,220,184
MAX FLOW
(L/MIN)
CONT,75,75,75,75,75
BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic Features:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*Special design in the driver-linker and prolong operating life
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation.
