POPSYNTH 1194 Compact Synthetic, Light Fast Fat liquor. CHARACTERISTICS : Appearance : Brown liquid. pH of 10% solution : 7.5 + 1 Active Matter : 70% + 2 Fastness to Light : Excellent PROPERTIES: Popsynth 1194 is ideal fat liquor for all type of soft leathers. Popsynth 1194 imparts velvet, round feel to the leather surface. Popsynth 1194 Possesses excellent light fastness and helps in uniform dyeing. Popsynth 1194 has a strong emulsifying power and is ideal for sophisticated class of leather which require soft feel with light weight . APPLICATION : Popsynth 1194 is especially suitable for garment, nappa drymill,upholstery,nubuck ,etc.as it gives excellent softness with light weight. STORAGE STABILITY : Popsynth 1194 can be stored for about one year under normal conditions and temperatures. Under extreme climatic conditions this product may separate slightly, So it should always be well stirred prior to use.
POPSYNTHOIL LF-10 Odourless fish oil based chrome stable fatliquor. Appearance : Slightly viscous light brown emulsion. Chemical Type : Sulphited high quality fish oil. Active Matter : 80% (+ 2) pH of 10% solution : 7.5 + (0.5) Ionic charge : Anionic in nature. Stability : Stable to acid, alkali, salt and mineral tanning agents. PROPERTIES : Popsynthoil LF10 is an all purpose anionic fat liquor for high degree of softness suitable for chrome and Semi Chrome as well as for vegetable tanned leathers. It is easily emulsifiable in water at normal temperature. Leather treated with Popsynthoil LF10 not only possesses softness and suppleness, but also, good tensile strength and water resistance. It imparts instant softness without high fat addition to the leather when it is partly incorporated in neutralization. We recommend 0.5-2.0% Popsynthoil LF10 in neutralization, depending upon the degree of softness required. Popsynthoil LF10 can also be used in rechroming prior to the addition of chrome powder to get extra softness and better chrome exhaustion. It has inherent properties to open leather fibres and to produce a fluffy, soft and round leather. Popsynthoil LF10 has no effect on aniline dyes. It is satisfactorily fast to light and does not impart any yellowing to leather under normal conditions. APPLICATIONS : Due to its excellent versatile properties, it can be used on a wide variety of leathers e.g. lining, upper, softies, upholstery, nappa, glove, clothing, etc. To avail its maximum efficacy to achieve desired softness, we recommend Popsynthoil LF10 to be used stage wise i.e. in re-chroming, neutralization as well as in main fat liquoring. STORAGE : Storage should be away from extreme conditions wherever possible. Under extreme climatic conditions this product may separate slightly. So it should always be well stirred immediately prior to use.
Chemical Nature: Sulphonated naphthalene formal dehyde polymer Appearance : Brown Colour Liquid pH (10% soln.) : 6.0-7.0 POPSUPLAST SNF is suitable in structural as well as under water concrete mixes for beams,slabs,columns,etc. POPSUPLAST SNF enables the concrete to flow through dense reinforcement. POPSUPLAST SNF increases work ability of mixes and produces cohesive mixes.It reduces permeability of concrete and increases durability of concrete.It increases slump retention for longer transit period. Consumption & Coverage : Dosed between 1.0-3.0% by weight of cement.
Appearance : Yellowish Brown Powder Dry Matter : 95% + 1 Lignosulphonate : 50% minimum. Moisture : 5.0% max. pH Value : 9.0-11.0 Sulphur(%) : 5.0% max. Sodium(%) : 10.0%-12.0% Ash on Dry : 6.0% max. Total Reducing Matter : 3.0%-4.0% Water Insoluble Matter : 2.0%-3.0% USES : In construction chemicals and cement grow. In fungicide formulations. In boiler water treatment chemicals.
Colour &Appearance: Clear syrup Dry Substance(%): 80% + 2 Dextrose Equivalent : 40 + 2 (D.E.) Sulphated Ash%: 0.2-0.3% pH value: 5.0-6.0 Sodium: Absent SO2 (ppm) : 100-200 APPLICATIONS : POP GLUCOSE LIQUID is widely used in confectionary, baking, brewing, processed foods,ice cream and dairy products,james and preserves,canning,meats and frozen foods industry. STORAGE : POP GLUCOSE LIQUID should be stored in a clean dry area at room temperature, Isolate from incompatible substances.Protect against physical damage.Recommended handling and storage temperature is between 40oc- 50oc prevent dextrose crystallisation.
POPCHELATE TTS is based on polyaminocarboxylic acid and EDTA (Ethylene Diamine Tetraacetic Acid). Its a chelating/seqestering agent and it chelates/complexes with various metal ions such as Ca, Mg, Fe, Al, Zn, Cu etc. It prevents staining on fabric. PROPERTIES: Appearance : White powder Solubility : Soluble in water pH of 10% soln. : 10 – 11 Active Ingredient : EDTA Tetrasodium salt Active Matter : 99 + 1% Chelation Value : 230 + 5
Popmollan FBSN Versatie Levelling Agent Properties : Chemical Nature : Amphoteric Mixture of ethoxylation products.(Acrylic Base) Appearance : Clear Viscous Liqiud. pH of 10% soln: 7.0 Features: POPMOLLAN FBSN is a versatile leveling agent in the dyeing wool, polyamide fibres and blends of wool with polyamide or polyester fibers in all processing forms. POPMOLLAN FBSN is acrylic based sequestering and dispersing agent. POPMOLLAN FBSN is particularly suitable in conjunction with 1:2 metal complex dyes that contain sulfomic acid groups.
Nitrogen Free Deliming Agent) CHEMICAL COMPOSITION : Blend of organic and inorganic acids. (Does not contain ammonium salts) APPEARANCE : Coarse-grained powder pH of 1:10 soln. : 2.5-3.0 PROPERTIES : Popdelimer AF is a granular white to yellowish powder. The acids dissolve very slowly and so no acid swelling must be feared. Popdelimer AF is based on nitrogen free raw materials and as no ammonia is brought is into the waste water by deliming it self. Popdelimer AF gives very light pelts and leathers with fine gram. Popdelimer AF gives an even deliming effect and completely removes the lime and activates chrome ? exhaustion during tanning. APPLICATIONS: Popdelimer AF is added undiluted and is used in normal floats but also in the so-called dry deliming. Depending on the thickness of the pelts and lime content of the pelts , 0.5 ? 1.5% of Popdelimer AF can be used. SHELF LIFE: Upto 1 year at temperatures between 5 and 40 0C and dry conditions.
POPLIME LA LIQUID is a liming auxiliary used for easier and effective dehairing and reduces the swelling of pelts. SPECIFICATIONS Appearance : Colourless or slightly yellowish liquid. Chemicals Nature : Blend of amino compounds. CHARACTERISTIC Features : Solid content ? approx 50% : pH (1:10) ? 10.5 : Does not contain Sodium Sulphide : Miscible in all proportions with water. PROPERTIES Poplime LA Liquid reduces the lime swelling effect and diminishes the formation of wrinkles and drawn grain. Poplime LA Liquid produces a clean and scudfree grain surface and the result is that very smooth, clean pelts are obtained. With Poplime LA Liquid the dosage of Sodium Sulphide and Sodium Sulphydrate can be reduced. Poplime LA Liquid enables the chemicals employed in the liming process to penetrate through the leather skin more evenly. The result is that the pelts swell more evenly and the chemicals can be utilized more efficiently. ADVANTAGES The pelts are very clean and very smooth after they have been limed. Growth marks, folds and blood vessels are much less prominent. APPLICATION Poplime LA Liquid is added undiluted before the application of Sofium Sulphide. The dosage depends on the type of raw stock and the float length. It is usually sufficient to add 0.5-1.5% Poplime LA Liquid, expressed as a proportion of the salted weight. STORAGE Poplime LA Liquid has a shelf life of atleast six months if stored tightly in sealed packing at temperatures between 0�C-50�C Without Gurantee
POPLIME EDS ULTRA is a blend of selected proteases with very effective dehairing properties. Dehairing is achieved by breakdown of the outer and inner sheath and roots of hair. Skin mucoids are also hydrolysed resulting in loosening of hair. SPECIFICATIONS Appearance : Off white Powder pH of 10% Soln. : 9.5-10.5 Moisture : Max. 4% Solubility : 98 +- 2% Optimum Temp. : 30 C - 35 C APPLICATION 0.1% OF POPLIME EDS ULTRA based on raw weight is used in soaking wet salted/dry salted hides and skins. 0.4% - 0.6%, of POPLIME EDS ULTRA based on raw weight is used for dehairing. Apply slurry/paste on the flesh side, pile and keep covered. Poplime EDS Ultra should be added before adding lime. Optimum pH at which Poplime EDS Ultra works effectively is from 7.5 - 11.5. ADVANTAGES Reduction in the use of sulphide, lime water and processing time. Flat and firm grain. Wrinkle Free pelt. Free from collagenase and hence no damage to skins/hides. Helps tanners address pollution problem effectively. Reduced water consumption. Faster soaking and easier dehairing. Time saved is money earned. Perfectly balanced enzyme for trouble free liming.
POPQUEBRACHO ATO G is a powder product obtained by chemicallly treating natural quebracho extract in order to achieve full cold water solubility and containing the largest tannin percentage among vegetable extracts. It is normal spray-dried extract. It is excellent for drum tannage and also for the retannage of chrome leather. Typical Analysis : Physical Aspect : Light reddish brown hygroscopic powder. PCP : Free Tannins % : 70% + 1 Non Tannins % : 20.0% +2.0 Moisture : 8.0% Maximum pH ( 1:10 soln.) : 4.7-5.3 Ash % : 6.8%+0.5 Insolubles : 0.5% Properties : POPQUEBRACHO ATO G is fully soluble in cold water. It has the following characteristics for vegetable tannage : High tannin content. Quick penetration at natural pH. Excellent tanning properties. Uniform quality. Not dusty. Non astringent. Good weight yield. Full compatibility with vegetable tans and syntans. It is particularly suitable for vegetable tanning of all kinds of leather, as well as for combined tanning and chrome leather retannage. For retannage of chrome leather POPQUEBRACHO ATO G permits : Better buffing properties. Excellent polish effect. Bellies and flanks fillings. To keep embossing effect. Applications : POPQUEBRACHO ATO G may be used alone or blended with other vegetable extracts. The following use is recommended : Based on limed weight : 25-30% of POPQuebracho ATO G for vachetta tannage ( veg. Leather ). 40% of POPQuebracho ATO G for soles tannage. Based on shaved weight : 3-18% of POPQuebracho ATO G for chrome leather retannage. Recommendations : During the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron sequestering agent such as Pop DS Powder ( 0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retanning processes. Powder extract dissolution should be performed by means of mechanical shaking. If done manually, it is advisable to work by dissolving the contents of each bag. The use of water at 35 �?�ºC facilities dissolution and prevents lump formation. Using small amounts of sodium metabisulfite and formic acid in tanning liquors and processes lightens the colour and improves the appearance of the end-products. Storage: POPQUEBRACHO ATO G maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags.
Poptan BFR Physical Appearance: A fine creamish white powder based on special compounds having 96% active contents. Applications: Poptan BFR is an alkaline powder with very fine particle size. It is uniformly but sparingly soluble in acid solutions. So it is an extraordinarily excellent self basifying agent for chrome tannages as its addition to chrome tan bath increases the pH very gradually which can be controlled by the amount added. So it offers a completely safe method for controlling the basicity of chrome tannage thus totally avoiding regular and close supervision required in case of other common alkalis used for basification. It is added soon after the penetration of chrome. An addition of 0.3-0.5% Poptan BFR on pelt weight is sufficient for normal pickle-chrome tan process although minor adjustments in pickle acid and amount of Poptan BFR for correct balance may be required. However, once this is obtained the process can be allowed to proceed safely with very little control for 6 hours to get the required pH level and boil test. Advantages : Poptan BFR regulates a gradual increase in pH without initial rapid increase normally observed with sodium carbonate or sodium bicarbonate etc., leading to perfect and levelled chrome distribution throughout the cross section of collagen and a smooth and light coloured grain. Its fine particle size totally eliminates the risk of abrasion to the pelt and ensures best results. Poptan BFR reacts with sulphuric acid to give only soluble salts. Alkalis based on calcium when used lead to formation of insoluble calcium sulphate in the pelt, which has a detrimental effect on the dyeing and can result in white stains on dyed leather. Storage: Can be stored under normal conditions and has an indefinite shelf life. Some cake formation may occur if it is stored in warm and humid conditions, but this does not affect its chemical activity.
POPLIME LA LIQUID (Liming Auxiliary) POPLIME LA LIQUID is a liming auxiliary used for easier and effective dehairing and reduces the swelling of pelts. SPECIFICATIONS Appearance : Colourless or slightly yellowish liquid. Chemicals Nature : Blend of amino compounds. CHARACTERISTIC Features : Solid content - approx 50% : pH (1:10) - 10.5 : Does not contain Sodium Sulphide : Miscible in all proportions with water. PROPERTIES Poplime LA Liquid reduces the lime swelling effect and diminishes the formation of wrinkles and drawn grain. Poplime LA Liquid produces a clean and scudfree grain surface and the result is that very smooth, clean pelts are obtained. With Poplime LA Liquid the dosage of Sodium Sulphide and Sodium Sulphydrate can be reduced. Poplime LA Liquid enables the chemicals employed in the liming process to penetrate through the leather skin more evenly. The result is that the pelts swell more evenly and the chemicals can be utilized more efficiently. ADVANTAGES The pelts are very clean and very smooth after they have been limed. Growth marks, folds and blood vessels are much less prominent. APPLICATION Poplime LA Liquid is added undiluted before the application of Sofium Sulphide. The dosage depends on the type of raw stock and the float length. It is usually sufficient to add 0.5-1.5% Poplime LA Liquid, expressed as a proportion of the salted weight.
POPSYNTHOL SV LIQUID Anionic,Economical Synthetic fatliquor. Popsynthol SV Liquid is an extremely versatile and economical low odour fatliquor and capable of producing leathers with inner softness of excellent lightfastness. CHARACTERISTICS : Appearance : Clear yellowish-Brown liquid. Chemical Nature : Anionic, based on synthetic oils, sulphited natural oil, esters of fatty substances and monohydric alcohol Active Matter : 65% approx. pH of 10% solution : 7.0-7.5+1 Stability : Stable in weak acids, salt, hard water and vegetable tannin. PROPERTIES : Popsynthol SV Liquid Penetrates deeply giving a high degree of softness with a warm handle and nourished grain. It produces good fullness and imparts good effect to Nappa leather clothing with high softness and no odour. APPLICATIONS : Popsynthol SV Liquid can be recommended for fatliquoring softy leather, cow dry milled, buff upper, corrected grain,split suede leather. Also recommended for leather furniture home where are soft and pretty surface. It can also be used in combination with other fats for all types of leather. Popsynthol SV Liquid is not recommended for use in the tanning bath. STORAGE : Storage should be away from extreme conditions wherever possible. Under extreme climatic conditions this product may separate slightly. So it should always be well stirred immediately prior to use.
POPSYNTHOL SPF Versatile synthetic fatliquor NEFAT SPF is a versatile synthetic fatliquor having sperm and fish oil base. CHARACTERISTICS: Appearance : Clear Amber Liquid. Chemical Nature : Anionic fatliquor based on fatty ester and sulphited fish oil. Active Matter : 80% ( +2) pH of 10% solution : 8.0 Stability : Excellent. Light Fastness : Good. PROPERTIES : POPTAN SPF has a strong emulsifying power and is ideal for all types of leather. POPTAN SPF imparts required degree of softness and fullness without making the grain loose and also imparts a pleasing handle and suppleness to the leather . APPLICATIONS: POPTAN SPF can be recommended for fat liquoring all types of leather,especially for softy upper,nappa,garment or upholstery. STORAGE : Storage should be away from extreme conditions wherever possible.under extreme climatic conditions this product may separate slightly,So it should always be well stirred immediately prior to use.
POPFIL MAC-30 Styrene Maleic Copolymeric Syntan App : Clear Slighty Viscous Liquid Chemical Nature : Styrene Maleic Rasin Active Matter : 30%ï? ±1 pH of 10% Solution : 7.0 â?? 8.0 Solubility : Readily Soluble in water. PROPERTIES: Popfil MAC 30 is designed for retannage of all types of leathers to impart fullness, tightness and a fine break to chrome & semi-chrome tanned leathers. Popfil MAC 30 gives unique combination of tight grain with mellow handle. Popfil MAC 30 imparts excellent body to the treated leather. Popfil MAC 30 is light fast and is ideally suitable for aniline leather and white or pastel coloured leathers. APPLICATION: IN RETANNAGE:- Popfil MAC 30 is used for retannage of chrome tanned leathers to improve fullness and tightness of grain. A dosage of 3-5% is recommended. IN CHROME TANNAGE: Popfil MAC 30 may also be applied in chrome tannages.
MIMOSA FS is a soft mimosa medium bleach extract and wattle extract which is suitable to any kind of vegetable leather. It is excellent for pit-drum or drum tannage and also for the retannage of chrome leather. Typical analysis : Physical Aspect : Brown Powder Ionic Character : Anionic PCP : Free Tannins % : 70.0% Non-Tannins % : 25% Moisture % : 6.0% maximum. pH (1:10 soln.) : 4.2 4.8 Ash Content : 5.0% maximum Insolubles : 0.5% Iron : 80 ppm max. Properties : MIMOSA FS is soluble in tap and hot water, with the following characteristics on vegetable tannage : Efficient penetration. Excellent yield. Good fixation For retannage of chrome leather MIMOSA FS permits : Bellies and flanks fillings. Better buffing properties. Excellent polish effect. To keep the embossing effect. APPLICATION : MIMOSA FS may be used alone or blended with other vegetable extracts. The following use is recommended : Based on limed weight 25-30% for vachetta tannage (veg leather) 40-45% for sole tannage. Based on shaved weight 5-15% of MIMOSA FS for chrome leather tannage. TYPES OF MANUFACTURE : Flexible and semi firm leather. Tanning and Re-tanning of chrome box-cow. Harness and calf leather. East Indian leather. RECOMMENDATION : During the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron-sequestering agent (0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retanning processes. STORAGE : MIMOSA FS maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags. PACKING : MIMOSA FS is presented in a powder form, dedusted, and packed in a 25Kg. bag net weight.
Mimosa Me POP MIMOSA ME is a soft mimosa single bleached extract of high quality indicated for tannage of hides and skins whenever a very light colour is required. In the tannage of soles and vachettas a very nice beige tone, often desired, is acheived. TYPICAL ANALYSIS : Physical Aspect : Light beige hygroscopic powder, dedusted. Ionic Character : Anionic PCP : Free Tannins % : 70.0 + 1.0 Non-Tannins % : 20% Insolubles : 0.5% Moisture % : 4.0% Mineral Ash : 0.4% Fe (Iron) : 0.00025 ppm Cu (Copper) : Nil pH (1:10 soln.) : 4.0 - 4.5 PROPERTIES : POP MIMOSA ME is soluble in tap and hot water, with the following characteristics on vegetable tannage : * Fast and efficient penetration. * Excellent yield. * Very light colour leathers * Good fixation * Nice beige tone For chrome leather tannage POP MIMOSA ME permits : * Bellies and flanks fillings. * Better buffing properties. * Excellent polish effect. * To keep the embossing effect. APPLICATION : POP MIMOSA ME may be used alone or blended with other vegetable extracts. The following use is recommended : * Based on limed weight * 25-30% for vachetta tannage (veg leather) * 40-45% for sole tannage. * Based on shaved weight * 5-15% for chrome leather tannage. TYPES OF MANUFACTURE : * Flexible and semi firm leather. * Tanning and Re-tanning of chrome box-cow. * Harness and calf leather. * East Indian leather. RECOMMENDATION : During the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron-sequestering agent such as Pop DS Powder (0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retanning processes. STORAGE : POP MIMOSA ME maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags. PACKING : POP MIMOSA ME is presented in a powder form, dedusted, and packed in a 25Kg. bag net weight.
1) Mmp – bh 20 (tannins less than 30 %) 2) Mmp - k 00 ( tannins 30 to 35 %) 3) Mmp – k 30 ( tannins 35 to 40 %) 4) Mmp- k 100 ( tannins above 40 %) Product application – This powder is hydrolysable type vegetable tanning material, with high in acidity and less salt. The reserve acidity in this powder gives mellowing effect and promotes the fixation of condensed type tannins. Blended with catechol tannins, this imparts light colour, fullness, plumpness and firmness to leather. This powder does not oxidize when exposed to sunlight and gives a protective coating to increase the colour fastness of the condensed tannins. It is more significant in making sole leather blended with mimosa extract. It is used in pit and drum processing in the manufacture of e.I. Kips, buff calf and skin. It protects from oxidation and aids better fixation of condensed tannins. By blending with syntans, it is useful for retanning, particularly shrunken grain upper leathers. It is used in boiler water treatment compound and as a mud-thinning agent in oil drilling. 25 kg bag
Range of Myrobalan powder we offer is listed below MMP BH 20 (Tannins less than 30 %) MMP - K 00 ( Tannins 30 to 35 %) MMP K 30 ( Tannins 35 to 40 %) MMP- K 100 ( Tannins above 40 %) Product Application This powder is hydrolysable type vegetable tanning material, with high in acidity and less salt. The reserve acidity in this powder gives mellowing effect and promotes the fixation of condensed type tannins. Blended with catechol tannins, this imparts light colour, fullness, plumpness and firmness to leather. This powder does not oxidize when exposed to sunlight and gives a protective coating to increase the colour fastness of the condensed tannins. Application: It is more significant in making sole leather blended with mimosa extract. It is used in pit and drum processing in the manufacture of E.I. Kips, Buff Calf and Skin. It protects from oxidation and aids better fixation of condensed tannins. By blending with syntans, it is useful for retanning, particularly shrunken grain upper leathers. It is used in boiler water treatment compound and as a mud-thinning agent in oil drilling CAS Number : 91844-92-7 Einecs/ Elincs No : 295-161-9
