Bitumen Oil Suppliers and Manufacturers

Technical Data Sheet Bitumen 60/70 Paving Grade Bitumen Description Bitumen 60/70 has the highest-boiling point, heaviest and most polar fraction from the vacuum distillation of crude oil. Bitumen 60 70 is composed of asphaltene and maltene. The heavy insoluble asphaltene molecules give bitumen 60/70 its body and softening point while the maltenes are oily and make asphalt flexible. Asphalting molecules are soluble in aromatic solvents like toluene but insoluble in heptane. The maltenes are heptane-soluble molecules and less aromatic. Applications Bitumen 60/70 is a high-quality penetration grade bitumen used in road construction and other similar applications. Bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products. Typical Specification ITEM SPECIFICATION TEST METHOD SPECIFIC GRAVITY @ 25/25 oC 1.01/1.06 D-70 PENETRATION @ 25 oC 60/70 D-5 SOFTENING POINT oC 49/56 D-36 DUCTILITY @ 25 oC SMC 100 MIN D-13 LOSS ON HEATING %WT 0.2 MAX D-6 DROP IN PENETRATION AFTER HEATING % 20 MAX D-6 & D-5 FLASH POINT oC 250 MIN D-92 SOLUBILITY IN CS2 %WT 99.5 MIN D-4 ORGANIC MATER INSOLUBLE IN CS 0.2 MAX D-4 SPOT TEST NEGATIVE *A.A.S.H.O.T 102 Packing: Bulk shipment, 150kgs, 180kgs, 200kgs new steel drum. 25kgs, 50kgs, 300kgs, 500kgs, 1000kgs Polybag.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Penetrating Bitumen Ideal for pavements, offering excellent penetration grades that contribute to the strength and longevity of road surfaces.

Viscosity Bitumen Characterized by its viscosity grade, it's suitable for high-temperature applications, ensuring stability and flexibility.

Superior Quality Functional Bitumen, sourced from the best refineries, our bitumen meets international standards for quality consistency. This bitumen is obtained by blowing hot air at a temperature of 200 to 300 degrees into pure bitumen. with a strong logistic network, we gaurantee timely and secure delivery to your projected port.

Superior Quality VISCOSITY BITUMEN , sourced from the best refineries, our bitumen meets international standards for quality and consistency. these grades are vailable, VG 10, VG20, VG30, VG40

Superior Quality Penetrating Bitumen sourced from the best refineries, our bitumen meets international standards for quality consistency. Available grades, 40-50 , 60-70 , 85-100 , 120-150 , 200-300 with strong logistic network, we guarantee timely and secure delivery to your projected port.

Maximum : 100,000 MT/Month

Origin: Kazakhstan MOQ: 50,000 MT x 12 mths Max Qty: 500,000 MT/mth

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25C: 60-70 dmm Softening Point: 49-56C Flash Point: Minimum 232C Ductility at 25C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25 C: 60-70 dmm Softening Point: 49-56 C Flash Point: Minimum 232 C Ductility at 25 C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.

VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating. VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 â?¦C to 25 â?¦C. Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance. This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India. As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.

VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature. In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.

VG40 bitumen is used in areas in which high pressure comes from heavy traffic loads, such as intersections, near tolls booths, and truck parking lots. Due to the high viscosity of this bitumen, it is more appropriate for improving resistance to shoving and other problems associated with higher temperatures and heavy traffic loads. Itâ??s long time that industries use vg-40 instead of the penetration grade bitumen 40/50.

This bitumen is primarily used for the construction of extra-heavy bitumen pavements that have to bear significant traffic loads. Bitumen VG30 is the most widely used type of bitumen in road construction, insulation, building construction industries, and also in the production of cutback bitumen. Itâ??s better to know that this vg30 bitumen can be used instead of 60/70 penetration bitumen grade.

Bitumen 40/50 represents another grade of bitumen available to our clients, catering to a diverse range of project requirements. As with our other products, the specifications of Bitumen 40/50 are meticulously documented and certified by accredited entities such as SGS or other reputable third-party inspection companies. This rigorous quality assurance process ensures that our clients receive a product that adheres to industry standards and meets their specific needs with reliability and consistency.

Bitumen 80/100 is widely recognized as one of the preferred bitumen grades for various industrial applications, including road construction and other projects. The product's specifications are meticulously documented and certified by reputable entities such as SGS or other third-party inspection companies. This ensures that the quality and performance of Bitumen 85/100 meet stringent industry standards, guaranteeing reliability and efficacy in diverse applications.