Petrochemicals Suppliers and Manufacturers

1. Jet Fuel A1 2. EN 590 Diesel Jet Fuel A - Product Description Jet Fuel A is a high-quality aviation turbine fuel specifically formulated for use in jet engines. It is a clear to straw-colored liquid that meets stringent international specifications to ensure safety, efficiency, and reliability in aviation operations. Key Specifications Chemical Composition: A mix of hydrocarbons including paraffins, cycloparaffins, and aromatic compounds. Free from additives like dyes or detergents unless specified by regulatory standards. Freezing Point: Maximum of -40C (-40F), ensuring reliability in cold temperatures. Flash Point: Minimum of 38C (100F), ensuring safety during handling and storage. Energy Content: Approximately 42.8 MJ/kg (Mega Joules per kilogram), providing high energy efficiency. Density: Ranges between 0.775 to 0.840 kg/L at 15C (59F). Kinematic Viscosity: Maximum of 8 mms at -20C (-4F), ensuring good flow characteristics even in low temperatures. Applications Commercial Aviation: Jet Fuel A is the primary fuel used in commercial airlines worldwide for turbofan, turbojet, and turboprop engines. Military Aviation: Used for military aircraft that are compatible with civilian-grade fuels. Industrial Applications: Occasionally used as a fuel for gas turbines in power generation. Advantages High Energy Content: Provides optimal performance and range for aircraft. Low Freezing Point: Allows operations at high altitudes with extremely low temperatures. EN 590 Diesel - Product Description EN 590 Diesel is a high-quality automotive fuel that complies with the European standard EN 590, which governs the physical and chemical properties of diesel fuels sold in the European Union and other regions. It is engineered to ensure compatibility with modern diesel engines while maintaining optimal performance and environmental compliance. Key Specifications Cetane Number: Minimum of 51, indicating high ignition quality for efficient combustion. Sulfur Content: Ultra-low sulfur content (maximum 10 ppm), complying with stringent emission regulations. Density: Ranges from 820 to 845 kg/m�³ at 15�°C, ensuring proper atomization in diesel engines. Flash Point: Minimum of 55�°C (131�°F), providing safe handling and storage. Viscosity: Between 2.0 and 4.5 mm�²/s at 40�°C, ensuring smooth fuel flow and lubrication. Cold Filter Plugging Point (CFPP): Varies by climate zone to ensure flowability in low temperatures: Summer Diesel: Up to 0C. Winter Diesel: Down to -20C or lower in cold regions. Energy Content: Approximately 42.6 MJ/kg, providing high efficiency and power output.

Petrochemical urea, npk and other products..

Petrochemical Application

SEE SGS ANALYSIS ATTACHED

Our company can provide the following chemical products Below are chemical products and monthly supply options If interested please provide a letter of intent to further provide product details and terms of purchase Orthoxylene Paraxylene Benzene Liquid Paraffin 1013 Liquid Paraffin 1417 Liquid Paraffin 13 Liquid Paraffin 921 Linear alkylbenzene grade A Alkyl benzene sulfonic acid grade A PABS

Shamrock Shipping and Trading is the one stop shop for the lubricants industry. With more than 20 years experience associated with the oil, petroleum, petrochemicals and lubricants industries, Shamrock is able to assist with the trading, distribution, logistics and financing of the following other petroleum and petrochemical products: WAXES WHITE OILS GLYCOLS HYDROGENATED CASTOR OIL PETROLATUM BITUMEN ANTI-FREEZE LITHIUM HYDROXIDE MONOHYDRATE

Note: this product is produced by refineries which adopts modern technology of solvent deoiling and hydrorefining. Export standard, suitable for sea transportation, packing in 50kg bags or in 28kg cartons.

l CG610S-P is a high efficient fluid loss additive with high purity and low dosage. l CG610S-P is applicable in a wide temperature range and is resistant to high temperature. l CG610S-P has salt resistance and is resistant to saturated brine. l CG610S-P slurry system is stable with little free fluid. l CG610S-P slurry system is not retarded, fast strength development. l CG610S-P slurry system has excellent rheological behavior. It doesn¡¯t require adding additional dispersant. l CG610S-P is suitable for both water and dry mixed. It has no special requirement on the quality of mixing water and is soluble in cold water. l CG610S-P can be made into dry mixed type CG610S-D through mixing with materials such as slag, silica flour, fly ash; also made into dry and water mixed dual purpose type CG610S-T.The weight percentage of CG610S-P is 40-60% when made into CG610S-D and CG610S-T. l CG610S-P can be made into liquid product CG610L through dissolving in the water. The weight percentage of CG610S-P is 20%-30% when made into CG610L. SPECIAL ATTENTIONS l CG610S-P¡¯s dosage should be increased if used in brine and high temperature system. l When CG610 L prepared with CG610S-P is not used at once, specialized bactericide should be added to extend the expiration period. 25kg/bag

Ammonium sulphate Cas no.: 7783-20-2 Einecs no.: 231-984-1 Capro grade as specification: 50 kgs per pp woven bag with pe film, bag .

Item : ammonium sulphate Cas no.: 7783-20-2 Einecs no.: 231-984-1 Capro grade as specification: Nitrogen content. ¡y 21% 50 kgs per pp woven bag with pe film

Purity: 99.87%. 65 kg

We are in strong position manufacturing and supplying whole range of paraffin wax made in China. High quality and competitive price, oil content 0.5% max. Fully refined, semi refined, fda grade and industrial grade 48/50, 50/52, 52/54, 54/56, 56/58, 58/60, 60/62, 64/66, 66/68, 68/70, 70/72, 72/74 paraffin wax. Bag, carton or palletization.

We can supply whole range of paraffin wax and micro wax made in China with high quality and competitive price. Micro wax No.70/Micro wax No.80/Micro wax No.85/Micro wax No.90 Micro wax LMP/Micro wax MMP/Micro wax HMP/Micro wax W445/Micro wax 1080 For Microcrystalline wax, specifications are as follows: Drop melting point:76.7-87.8deg. C Saybolt color: +15 min Oil content:1.0 max Needle penetration:15. Bag, carton or palletization.

The highest quality paraffin wax with melting point 58-60 c and oil content 1-1.5% Applications of paraffin wax is candles production, matches productions, PVC, adhesives, modeling clay, crayons and carbon paper. Cartoon packing 25 kg.

1) Product Introduction Dunba Nano Fuel-saving & maintaining Fluid for large vehicle¡± is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. 2) Nine functions * Fuel saving: Fuel economy, engine oil saving, 5%-25% oil consumption saved; * Improve efficiency: Significantly improve the efficiency of mechanical transmission, increase the effective output power, and improve carrying capacity the vehicle; * Anti-wear: 80%-90% reductions in engine wear and tear, still can provide strong anti-wear protection under lubrication system failure and no engine oil condition. * Self-repair: Dynamically repair wear and tear, engine life is extended 2-3 times; * Fast start Strong lubrication performance, can effectively reduce the friction coefficient, improve the initial rotation speed; * Power strengthening: restore the engine cylinder pressure. Power increased by 5%-35%; * Noise reduction: effectively reduce engine noise and vibration * Corrosion prevention: prevent friction parts from corrosive pitting. * Environmentally friendly: improve engine oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%. 3) Four Major Features Fast: engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced. Powerful: triple protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles. Environmental Friendly: reduce exhaust particles and smoke emissions. No side effects: suitable for long-term use of various vehicles, without any adverse effects or side effects. 4) Two Major Breakthroughs Self-repair Nano particle repairs the wear & scuffing surface automatically, then fundamentally realizing the engine maintenance; Multi-functional : fuel-saving, anti-wear, self-repair and maintaining simultaneously. 5) Product Application This product can be easily and stably dispersed in all kinds of lubricants, suitable for various power systems of large vehicles, such as passenger cars, trucks and construction vehicles etc.. For those badly worn vehicles run for many years will have better anti-wear and repair effect. 6) Usage methods Add this product to engine lubricant, keep the engine idle for around 2 minutes, or add the mixed product with lubricant. Normal usage about 2.5% of the total lubricating oil, in other words, for large vehicle please mix 20 liters of lubricating oil with one bottle (500 grams). 7) Notice: 1) Noninflammable, in explosive, in corrosive; 2) Don't drink and avoid long time skin contact; 3) Protect from impurity and water; 4) Keep in normal temperature and avoid sunlight. 500g/bottle, boxes or customized.

1) Product Introduction Dunba Nano Fuel-saving & maintaining Fluid for Limousine¡± is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. 2) Nine functions Fuel economy: saving fuel and engine oil, 5%-25% oil consumption saved; Engine protection: triple strong protection to ensure that the engine is powerful in any work condition; Anti-wear: 80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil. Self repair: wear and tear repaired dynamically, engine life extended 2-3 times. Fast start: superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed. Power strengthening: restore the engine cylinder pressure. Power increased by 5%-35%. Noise reduction: effectively reduce engine noise and vibration. Corrosion prevention: prevent friction parts from corrosive pitting. Environmentally friendly: improve oil burning, blue smoke and other conditions, reduce exhaust particles by 20%-30% and smoke emissions by 50%. 3) Four Major Features Fast: engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced. Powerful: triple strong protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles. Environmental Friendly: reduce exhaust particles and smoke emissions. No side effects: suitable for long-term use of various vehicles, without any adverse effects or side effects. 4) Two Major Breakthroughs Self-repair, Nano particle repairs the wear & scuffing surface automatically, then fundamentally achieving the engine maintenance; Four in one, Fuel economy, anti-wear, repairing and maintaining simultaneously. 5) Application This product can be easily and stably dispersed in all kinds of lubricants, suitable for various power system of a broad range of cars, the anti-wear and repair effect is more excellent for those vehicles run for many years and badly worn cars. 6) Usage methods Add this product to engine lubricant, keep the engine idle for around 2 minutes, or add the mixed product with lubricant. Normal usage about 3.5% of the total lubricating oil, in other words, for ordinary car, please mix 4 liters of lubricating oil with one bottle (150 grams). 7) Notice 1) Noninflammable, in explosive, in corrosive; 2) Don't drink and avoid long time skin contact; 3) Protect from impurity and water; 4) Keep in normal temperature and avoid sunlight. Boxes, 150g/bottle.

1. Introduction This product belongs to high-effective non-ion surfactant. It is used for dehydration of crude oil and desalting in refineries. 2. Quality index(JHP8703) Appearance Density(20oC) Chroma PH value brown yellow viscous liquid0.95-1.05 g/cm33007-9 4. Using method Mix it to be 2% water solution. Normally, its dosage is about 30-100ppm. 5. Cautions This product has strong moisture absorption, so its container should be sealed. Avoid insolation and fire and store in dry and ventilated conditions. 6. Storage, transportation and packing a. 200kg clean and dry metal drum. b. Storage period is one year. 200L drum, also can be packed with customers' need.

Itme Quality specification Test means Melting Point(Deg. C) 56-58 GB/T2539 Oil Content 0.5 max GB/T3554 Color 28-+30 GB/T3555 Light Stability 4 max SH/T0404 Needle Penetration (25Deg. C 100g) 15max GB/T4985 Odor 2 max SH/T0414 Mechanical Impurity & Moisture NO Water-solubility Acid & Base NO SH/T0407 Kinematic Viscosity (100Deg. C/mm2/s GB/T265. 25/50KGS Per bag.

We supplies different types of paraffin waxes that can be used in Personal Care, Adhesives, Candles, Inks and Coatings, Textiles and Polishes, Wax Compounding and other specialty applications. They function as lubricants, base materials, viscosity modifiers, etc, ensuring excellent performance at a competitive price. We offers a range of fully refined paraffin covering a wide range of melting points from 52°C to 68°C. Our general purpose paraffin waxes cover EPIWAX, Sasolwax, Renox and Woodshield brands. Specialty Blends: We has a comprehensive range of pharmaceutical grade waxes, specially formulated for use in personal care products like lipsticks, creams, lotions, depilatory products and color cosmetics, etc. Our Sasolwax grades display excellent performance, and exhibits consistently high quality products. In terms of standards, Sasolwax products are GMP, ISO and HACCP certified., for your peace of mind. We offer a comprehensive range of pharmaceutical grade paraffin waxes ranging from soft (Sasolwax 4608) to hard paraffin waxes (Sasolwax 5105, Sasolwax 5803 and Sasolwax 6203). Candle: We also supply specially formulated waxes for various targeted applications like wick coating waxes (Sasolwax 8204, Sasolwax 6301, etc) and candle extrusion (Sasolwax 0716, etc). In addition, we provide a unique range of specially formulated waxes, EPIWAX A10, A11 and A12, for use in crystal-effect candles. Additives: We also has a range of specialty wax additive, EPIWAX EM11 and EM12, for the manufacture of mottle-effect candles. For use in gel candles, we recommend Kraton G1650 for a transparent effect.