Brown Fused Alumina Refractory Grades is a mineral with fine particle distribution for shaped and unshaped refractory products in fire-proof, precision casting, foundry and coating industries. Our Brown Fused Alumina Refractory Grades is a high grade refractory material with high purity, high cleaness, coarse grain, low magnetic contents, high density, high bulk density, chemical stability, low prosity rate, nice crystal struction, corrosion and acid resistant. No cracks, corrosion or spot during production of refractory products. Brown Fused Alumina is the most popular refractory material, especially for refractory bricks.
Brown fused alumina is produced by the smelting of Calcined Bauxite in an electric arc furnace at temperatures greater than 2200. A slow solidification process follows the fusion, to yield blocky crystals. The melting help in removing residual carbon , Strict control over Titania levels during the fusion process ensures optimum toughness of the grains. Then The cooled crude is further crushed, cleaned of magnetic impurities in high intensity magnetic separators and classified into narrow size fractions to suit the end use. Taiyue brown fused alumina is with high purity,high crystallinity,lower expansion coefficient,refractoriness above temperature 1900. It is the best raw material for refractory.
BFA brown fused alumina for Refractory material/brown corundum Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Brown Fused Alumina (BFA) is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications. Application Range Abrasive: Produce ceramic grind wheel, resinoid grinding wheel, Grinding stone, Grinding block, sand paper, sand cloth, sand belt, polish wax, abrasive paste, coating etc.. Refractory material: Mainly used for abrasion and high temperature resistant, inoxidizable aggregate and filling of shaped and monolithic refractory in steel metallurgy, various industrial stoves, electric furnace etc.. Sandblasting abrasive: Mainly used for various material workpieces to decontaminate, derusting, prevent corrosion, remove oxide skin etc.. Abrasion resistance ground: Mainly used for non-slip of airport and road, chemical factory board paving. Precision casting: Investment casting technics of stainless steel and aluminium casting in coating.
Brown fused alumina is fused and crystalized under high temparature from a mixture of bauxite and other raw materials.It is characterized by its high hardness, good toughness and sharp shape in size.Abrasives tools made of it are suitable for grinding metals of high-tensile strength such as:carbon steel, generalpurpose alloy steel, annled malleable cast iron and hard bronze , etc.It also can be used as refractory materials. 1.According to customer 2.25kgs/nylon bag.
brown fused alumina Brown corundum refractory material abrasive material
Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material. Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.
Brown Fused Alumina for Abrasion Resistance Ground Brown fused alumina can be used for highway road, airport runway, non-slip road, factory board paving and surface decorated material of dam. Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material. Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. Brown Fused Alumina cant burstpulverize and craze in the using course. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.
Brown Fused Alumina for Abrasion Resistance Ground Brown fused alumina can be used for highway road, airport runway, non-slip road, factory board paving and surface decorated material of dam. Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material. Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. Brown Fused Alumina cant burstpulverize and craze in the using course. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.
5% Max. Broken 1% Max. Foreign Matter 90% Gelatinized 99,7% Max. Parboiled 1,75% Max. Spotted or Satined 1% Max. Red Grains 0,2% Max. Mouldy and Burnt 1% Max. Damaged and Injuried 3 Max/KG Paddy (Grains)
Brown rice is whole grain rice, with the inedible outer hull removed; white rice is the same grain with the hull, bran layer and cereal germ removed. Red rice, gold rice, and black rice (sometimes known as purple rice) are all whole rices, but with a differently-pigmented outer layer. Packaging sizes: 1kg, 5kg, 10kg, 15kg, 20kg, 50kg, bulk
Gremlog Trading DMCC emerges as a pioneering force in the recycling landscape, offering recycled silica sand in sizes ranging from 0-1mm to 1-4mm. Leveraging the inherent advantages of repurposed silica-based spent foundry sands, Gremlog Trading DMCC champions sustainable practices within the metal casting industry. By providing recycled silica sand, Gremlog Trading DMCC contributes to energy conservation, reduces reliance on virgin materials, and delivers cost-effective solutions for both producers and end users. Gremlog Trading DMCC's recycled silica sand stands as a versatile resource, poised to revolutionize not only traditional applications but also industry-specific needs. At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries. Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.
PK-386 Brown Rice 25kg,50kg
Irri-6 Brown Rice 1Kg,5kg
Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
