Brown Fused Alumina for Abrasion Resistance Ground
Brown fused alumina can be used for highway road, airport runway, non-slip road, factory board paving and surface decorated material of dam.
Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material.
Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. Brown Fused Alumina cant burstpulverize and craze in the using course. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.
spec:Al2O3: >95%, SiO2:
brown fused alumina Brown corundum refractory material abrasive material
Brown Fused alumina is bauxite, coke, anthracite as main raw materials, made more than 2000 degrees high temperature melting, hitches in arc through the mill grinding, plastic, magnetic separation to iron, screen is divided into a variety of particle size, dense texture, high hardness, particle formed globular.High consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, sandblasting, precision casting, etc., can also be used for manufacturing advanced refractories
BFA brown fused alumina Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250 Maximum service temperature 1850 Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Brown fused alumina polishing Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
brown fused alumina grinding Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA Brown fused alumina Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
1.Brown Fused Alumina is fused and crystallized under the high temperature of above 2250 degree centigrade with high quality bauxite,carbon and iron as raw material. Our product characterized by high purity,good crystal,strong fluidity,low coefficient of linear expansion,good corrosion-resistance and so on.Could not burst,no pulverization and crack in using course of refractory. 1.Place of original: HENAN 2.Material:AI2O3 3.Real Density: 3.9g/m3 4.Bulk density: 1.53-1.99g/m3 5.Melting point: 2250 6.Refractoriness:1900 7.Mohs hardness: 9.0 8.Usage: abrasive/blasting/polishing/refractory 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sampla: free 12.MOQ: 25ton 13.Color: Brown Supply Ability 3500 Ton/Tons per Month.
1.Brown Fused Alumina is fused and crystallized under the high temperature of above 2250 degree centigrade with high quality bauxite,carbon and iron as raw material. Our product characterized by high purity,good crystal,strong fluidity,low coefficient of linear expansion,good corrosion-resistance and so on.Could not burst,no pulverization and crack in using course of refractory. 1.Place of original: HENAN 2.Material:AI2O3 3.Real Density: 3.9g/m3 4.Bulk density: 1.53-1.99g/m3 5.Melting point: 2250 6.Refractoriness:1900 7.Mohs hardness: 9.0 8.Usage: abrasive/blasting/polishing/refractory 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sampla: free 12.MOQ: 25ton 13.Color: Brown Supply Ability 3500 Ton/Tons per Month.
Aluminium oxide is used in blasting cabinet or blast rooms, in an area where you can recycle. It is used to shot blast chassis components, alloy wheels, brake callipers, small ferrous components. Aluminium Oxide is used in the aero space industry . Aluminum oxide is used in boned abrasives or refractory or coated abrasives. Barmac/angular Available in pink/brown/white. F12-F220 0-1mm 1-3mm 3-5mm 5-8mm P12-P220
