Brown Fused Alumina For Refractory

Brown fused alumina is produced by the smelting of Calcined Bauxite in an electric arc furnace at temperatures greater than 2200. A slow solidification process follows the fusion, to yield blocky crystals. The melting help in removing residual carbon , Strict control over Titania levels during the fusion process ensures optimum toughness of the grains. Then The cooled crude is further crushed, cleaned of magnetic impurities in high intensity magnetic separators and classified into narrow size fractions to suit the end use. Taiyue brown fused alumina is with high purity,high crystallinity,lower expansion coefficient,refractoriness above temperature 1900. It is the best raw material for refractory.

BFA brown fused alumina for Refractory material/brown corundum Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000

Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.

Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.

Brown Fused Alumina (BFA) is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications. Application Range Abrasive: Produce ceramic grind wheel, resinoid grinding wheel, Grinding stone, Grinding block, sand paper, sand cloth, sand belt, polish wax, abrasive paste, coating etc.. Refractory material: Mainly used for abrasion and high temperature resistant, inoxidizable aggregate and filling of shaped and monolithic refractory in steel metallurgy, various industrial stoves, electric furnace etc.. Sandblasting abrasive: Mainly used for various material workpieces to decontaminate, derusting, prevent corrosion, remove oxide skin etc.. Abrasion resistance ground: Mainly used for non-slip of airport and road, chemical factory board paving. Precision casting: Investment casting technics of stainless steel and aluminium casting in coating.

Brown fused alumina is fused and crystalized under high temparature from a mixture of bauxite and other raw materials.It is characterized by its high hardness, good toughness and sharp shape in size.Abrasives tools made of it are suitable for grinding metals of high-tensile strength such as:carbon steel, generalpurpose alloy steel, annled malleable cast iron and hard bronze , etc.It also can be used as refractory materials. 1.According to customer 2.25kgs/nylon bag.

Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material. Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.

Brown Fused Alumina for Abrasion Resistance Ground Brown fused alumina can be used for highway road, airport runway, non-slip road, factory board paving and surface decorated material of dam. Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material. Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. Brown Fused Alumina cant burstpulverize and craze in the using course. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.

Brown Fused Alumina for Abrasion Resistance Ground Brown fused alumina can be used for highway road, airport runway, non-slip road, factory board paving and surface decorated material of dam. Brown fused alumina is fused in the electric furnace with the high quality abrasive grade bauxite , coal and scrap iron as the raw material. Brown Fused Alumina for refractory is characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion ,good corrosion-resistance and so on. Brown Fused Alumina cant burstpulverize and craze in the using course. In particular, its performance-cost ratio is much higher than traditional Brown Fused Alumina, making Brown Fused Alumina become the best aggregate and padding of brown fused alumina refractory materials.