Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customers requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
Can supply: ALUMINIUM LAMINATED FILM ROLLS, PRINTED STOCK LOT. Post industrial. Clean. Pack: in big bags. Can load in 1x40HC container aprox. 26 - 28 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information. You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Supplier: Rice, corn, sugar, wheat, cement, aluminum ingots, copper scrap , used rail and hms 1&2, urea, sulphur, cooking oils, petroleum products, aviation fuel, mazut, millet, alfalfa grass, timber logs, teak wood, wood pallet
Buyer: Steel scrap, used rails, cement
