Rio Port Self Suction Sit Up Exercise Equipment Suppliers and Manufacturers

PM 890 series UPS is an intelligent 3 phase in 3 phase out the uninterruptible power supply, it adopts double transform high-frequency PWM and high-performance digital control technique (DSP), with perfect protection, super network management function, reasonable man-machine interface, and a series of precision design, meets all high-reliability requirements of uninterruptible power supply and integrates reliable, safety, maintainability characteristics of a new generation low-frequency UPS. The Pure Sine Wave Interactive Outdoor Uninterruptible Power Supply (UPS) has been meticulously engineered to cater to the exigencies of outdoor communication equipment, networking apparatus, and traffic control systems, thereby finding its utility in urban corners, rural expanses, and mountainous terrains alike. This UPS is endowed with attributes such as exceptional heat endurance, frost resilience, corrosion resistance, dust abatement, and waterproofing. Distinguished by its advanced features encompassing a broad spectrum of input voltage and frequency, exceptional dependability, energy efficiency, environmental consciousness, surge protection, remote operational capability, and remote monitoring, our UPS ensures steadfast power provisioning to communication, networking, and traffic control infrastructure. Consequently, it emerges as an indispensable facilitator in the seamless operation of these critical outdoor systems. Features: -100% unbalanced load capability > Superior protection - Online double-conversion with full DSP control - Standard emergency power off (EPO) - Optional N+X redundancy parallel up to 6 units - Support battery cold start and auto-restart when mains power is restored - Output power factor 0.9 - High MTBF (> 200,000 h) - IGBT inverter with output isolation transformer - Standard RS232, RS485, dry contacts communication port - Optional input filter to improve input power factor - Frontaccessmakes maintenance and replace�­ ment simplified (60 - 120 kVA) - Generator-compatible Low MTTR (< 0.5 h) - ECO mode operation for energy-saving - Optional SNMP communication port - 5.7 inches LCD touch screen, friendly human & machine interface - Intelligent self-diagnosing function, all kinds of failure protection, large capability of history records storage

Skype:kathysunrans Size:5850*2200*1300mm Material:acrylic(fiberglass reinforcement) Seat for lying:0 person Seat for sitting:6 person Seat depth;675mm Dry weight:850kg Gross weight:1200kg Water capacity:2105gal/9.57cbm Total jets;103pcs 5 roto swim jets:12pcs 3.5hydropathic spa jets:10pcs 1.5hydropathic spa jets:98pcs Total 2air jets:14pcs Rated voltage:110v/220v/240v/380v Rated frequency:lf50hz/60hz Programmable control system:3 sets Booster pump:3pc*2hp+4pc*3hp Circulation pump(pc):2pc*1hp Air blower:2pc*1.5hp Ozonator:2pcs Heater:2pc*3kw Underwater light:3pcs Stainless steel waterfall:1set Waterfall with led lights:2 sets Fountain:2pcs Water level led lights:46pcs Double cartridge filter:2pcs Water diverter:4pcs Air check valve:11 Suctions:2pcs Ball valves:4pcs Drain valve:2pcs Back-water valve::10pcs Headrest pillow:5pcs Stainless steel frame:1pc Speaker:4pcs Radio:2sets Wooden skirt(canada imported hemlock):1pc Options: Balboa system Up-down tv Luxury dvd Cover and cover lift Heat insulation Frp seal bottom Plastic hem Ladder Pop-up speaker Stainless steel jets Teak hem Aromatherapy Film+foam+hard paper+wooden crate+iron sheet

Lcd keypads (rp248kcl) Display of two lines and 32 characters 3 keypad emergency zones: panic[1]+[2], fire[4]+[5], special emergency[7]+[8] Menu indicates the user functions and the installer programing Key-press with audible feedback System condition display Trouble display Led indication: alarm, power, armed, disarmed, bypass, ready, tamper User information is displayed on screen (except for password) Lcd backlight Tamper is supervised Alarm by duress code Easy to use hot-keys for simple bypassing and not-ready zones display One button for quick arming One button for quick perimeter arming Alarm memory display System trouble display Up to 4 lcd keypads can be connected Mainboardf]rp248mbf^ Zone terminal resistor (2.2k+[) 8 zones on mainboard Expandable up to 72 programmable zones Special zones: zone-5 is fire zone, zone-6 is tamper zone Can be parted to 8 divisions 11 types of programmable zones, 7 types of voice formats Zone terminal: nc, no, single end with resistor Programmable output: 70ma Expandable to 32 large current output: 3a 50 event records 8 groups of 4 gradable codes Switch output: 250ma Built-in siren driver: 750ma max Built-in digital clock Daily test report Function of end calling Disarm/arm report 4 lcd keypads can be connected to control panel Programmble voice for the siren output Current outputfg750ma(max) Auxiliary power output: 400ma Mainboard has 7 types of fire alarm bell voice drivers Connectible with four 1.5v 12a power supply expansion boards Mainboard has one 70ma programmable open circuit collector Connectible with 32 c-type programmble relays of 3a Circuit responding time of each zone can be set as 10ms, 500ms or 1s The distance is up to 1500m between module and control panel Built-in digital communicator Attached digital communicator, compatible with contract idfa4+2 2 central station numbers 4 follow-me phone numbers Code One installer code One (user) main code (can create duress code automatically) 8 gradable user codes Periodic test Offer testing report to alarm center automatically Peripheral equipment Expandable function of 32 lines relay output Disarmed/armed by romote control. Any zone can be programmed to be the switch lock port Rs232 port Expandable zone board 8 zones expansion module ez8 8 zones wiring expansion module Power supply output of switch lock Zones terminal: nc, no, single end with resistor (2.2k+[) Circuit responding time of each zone can be set as 10ms, 500ms or 1s 4-line connection, and easy for installation 8 zones wireless expansion module ew8 Wireless expansion module Time to supervise is programmable Monitoring of emitter in low power Tamper of emitter is supervised Indication of interfering signal Wireless detector is supported Verifying code by cycle 4 program output expansion module e04 4 lines programmable output(3a) Output: nc, no, locked or pulse Responding to various events Xto module supports x-10 agreement Power supply output expansion module (rp248eps) Connect with 5 modules by 4-line Provide 2.0a, 12v power to other module and siren Complete supervision of power supply condition, including battery, ac, siren circuit and auxiliary power output Built-in siren driver Tamper is supervised Memory when power is cut Digital voice module rv2006v 1 piece of voice message, time lasts 20s Follow-me number is assignable Timing function Auto daily arm Auto daily test report Disarm/arm report at window Monitoring function Trouble data can be displayed on keypad, and also can be transmited to central station Spare battery in low power Expansion module of power suplly battery in low power Siren circuit in trouble Power expansion module of siren circuit in trouble

Technical Specifications: Cutting length: 180-220cm Cutting width: 160-220cm Cutting thickness: up to 6.5cm of compressed fabric. Max speed: 100m/min Acceleration: 1g 9KW+15KW Operating Temperature: 10¡ãC-40¡ãC Operating Humidity: 30%~80% Weight: 4000kg Main Features & Functions: Digital control of all components, to obtain maximum precision and possibility of feed back in real time Self-learning system to obtain automatically maximum efficiency Possibility to optimize energy consumption Auto-diagnosis system to identify and advice eventual errors or anomalies Clever vacuum system to maintain automatically the level of suction required, improving the cutting quality and optimizing the consumption Washable filter for vacuum pomp Automatic calculation of cutting window and route optimization Full compatibility with other systems by standard file ISO/ANSI Two ways off-loading conveyor User interface easy and intuitive with possibility to display in real time cutting process and production data.

Trailer concrete pump A. Hydraulic system: Both the main pumping circuit and fªsfª valve circuit are open-circuit, each is driven by a pump, which makes the two circuits independent to each other. The simplified system, results in a long service life, high reliability and easier troubleshooting. Proximity switch used to control the direction of the main pumping makes changeover steady and reliable. Main components of the hydraulic system are supplied by famous brands in the world. The equipped special safety devices, such as relief value, pressure cut-off control, alarming system and auto-reversing etc, promise the system to be more reliable than ever Driven by the constant pressure pump with an accumulator, the swivel cylinder can get enough moment, and save power at the same time. All imported sealing kits feature high performance and long lifetime. With the electrical solenoid or hydraulic directional valve, the switching from high pressure to low pressure becomes easy and quick to operate. There is less hydraulic leakage than the other domestic products. B. Electrical system: Features advanced technology, effortless operation, high reliability Comes with a programmable logic controller (plc), which takes the place of many relays, time relays, which not only greatly reduces components but also simplifies wiring in the system, ensures a higher reliability. In combination with plc, a visual display can indicate the status of inputs and outputs, lead to an easier troubleshooting. 90% of the electrical components come from the world-class brands, which guarantee high reliability. During starting period, the wiring is changed from connection to triangular connection to avoid the potential damage of direct starting. When the power of the electromotor is larger than 110 kw, the soft starter, is a recommended option device, which can successfully check the current surge. Equipped with remote controller, of which zoomlion possess the intellectual property, make it convenient to operate concrete pump from a long distance. The proximity switches can help to realize automatic direction changeover when pumping C. Mechanical system: During the designing of key parts , such as fªsfª pipe distribution valvef=hopper, software i-deas is adopted to realize finite element analysis of load distribution, construction rigidity and stress concentration. Owing to its excellent rigidity and process technology, the optimized hopper and fªsfª valve system can effectively avoid the following phenomena like hopper distortion and breakage of fªsfª piping valve shaft during high pressure conveying. By a special design on sealing structure of agitator, hydraulic motors are completely separated from bearing seats, even under the situation of sealing failure, the slurry has no chance to get into motor. High-- torque motors ensure high mixing torque. Thanks to the auto-reversing device and anti-wearing blades, the blockade will never happen even under severe aggregate condition. The wearing parts, such as the anti-wearing plate and the cutting ring, have a long service life up to 20000m3 under favorable condition. The distance between the anti-wearing plate and the cutting ring can be automatically adjusted. D. Power system: Supplied by famous domestic manufacturers, the electromotor can guarantee excellent performance and high reliability. E. Lubrication system: The patented central automatic lubrication system comes with a piston grease-pump, features high pressure and reliability, which can realize automatic lubrication of piston. The filters at the outlet and the inlet of oil ports as double protections guarantee the system reliability.. F. Cooling system: Compulsory air-cooled heat exchanger keeps the temperature of the hydraulic oil below 60f¦·+that ensures the whole hydraulic system works at normal status. G. Cleaning device: Equipped water pump makes the cleaning and maintaining an easy job. Zoom lion concrete pump pumped 50, 000 cubic meters of concrete in the construction of hualupo bridge in neikun railway, no.8 bridge in the world.

Zykm iii machine performance Consists of paper feeding unit, printing unit, slotting unit, die cutting unit and stacking unit. Dual system control: the separate computer control desk and control panel are able to control the machine running independently. Cnc(computer control center) large capacity menu storage, 9999 routine menu storage of automatic menu change and easy operation. The data is transmitted by computer to realize the on-line check-up to solve the equipment communication errors and let the operation more simple and quick. Forme plate cleaning memory: the forme plate position can be memorized and unnecessary to re-trial printing in case the machine stops for forme cleaning. The front edge feeder with vacuum suction for easy operation and high accuracy. The collision proof device is installed in the impression and slotting synchronous movement regulation section of slotting unit. The die cutting rubber roller is equipped with the auto recovery system and differential speed compensation unit. Main transmission gear moves precisely, for the sake of the part is made of quality steel alloy and teeth precisely milled to render them stable performance. The key free connecting ring features in high precise transmission and accurate printing and registering. Packed by paperboard and plastic film

quipped with Four-wheel driven massage mechanism, this can move upward and downward. Automatically scans the massage point of the upper body and shoulder. Programmed with five kinds of massage functions: Shiatsu, kneading, flapping, knocking and synchronous kneading & flapping. Automatic Massage modes for the upper body. (Three optional areas of the upper body; shoulder and neck; back and waist) Offers manual massage for the upper body with three options (overall, fixed and partial area) with five levels of speed respectively. Under the massage modes of flapping, shiatsu and knocking, the width between the two massage hands can be adjusted in three levels (wide, middle and narrow). Two types of air pressure massage function. Strength of the air pressure massage can be adjusted. Two ways of vibration massage function, one on both side of the seat cushion, two strengths available. Armrest air pressure massage. Also equipped with Mp3 music function. Hand held jade heating function. Massage state memory function. Backrest heating function. Lying Angle adjustment function; Calf Rest reclining and declining function; Backrest reclining and declining function. Automatically sitting up function of the chair and automatically recovering function of the backrest mechanism when the machine gets turned off.

The hole machine was consists of paper feeding machine, printing unit, slotting unit, die cutting unit and stacking unit. Fulfill the processes automatically i. E. Paper feeding, printing (1~4 colors), scoring, trimming, slotting, angle cutting (hole punching) or die cutting, stacking. Vacuum suction push-plate auxiliary paper feed of precision and reliability. The phase of printing forme cylinder, slotting knife disc and die cutting roller die cutting roller circumferential adjustment are set electrically. The printing forme cylinder, slotting knife disc, axial die cutting roller and slotting carton height can all be controlled manually Auto zeroing (reset) devices are equipped in printing unit, slotting unit and die cutting unit. A rubber recovery system and differential speed compensation device are added in die cutting roller. Quick gap manual micro regulating self locker with features of easiness and fastness. Main motor engaged with electromagnetic speed regulation of stable performance; Each machine unit engagement/disengagement and pneumatic lock are done automatically in turns; the alarm sounds when units are shifting to secure the operators safety; units brake automatically to secure the printing at original position; The drive gear adopts top quality structure steel equipped with splashing lubrication device featuring low noise and long service life. The high precise transmission with key connection guarantees accurate registering. Cross sliding block installed in every drive gear secures high transmission accuracy. The splashing lubrication enables oil stored in every gear oil tank and circulated with oil pump to facilitate constant splashing oiling. Packed by paperboard and plastic film

Model Number:BJJ-20-AH1D Feature: 1.The fuel dispenser equipment has explosion proof configuration with petrol and diesel integrated design 2.The standard of excellent accuracy that measuring accuracy can reach 2/1000; 3.Two way control valves to ensure the precise control of a small amount of fuel; 4.Professional, scientific lines and piping design to ensure the performance of the whole machine; 5.The high-accuracy fuel dispenser with double-layer steel wire mesh, wear-resisting, corrosion resistance and pressure resistant tubing. Specification: Applicable medium:Diesel, kerosene gasoline Flow rate:20-100L/min; Main power supply:AC220V; Head/Suction:25m/5m; Error of plus or minus :0.2% Power:1KW; Setting range:0.0-$9999 Discharge caliber:25-32mm; Metering volume:5L Weight:78.5KG Accumulative range:0-99999L; Size:550*485*720mm Display range:0-$99999. Why Choose Us : 1.Our China best mobile mini fuel dispenser, portable fuel dispenser, refueling dispenser comparing with other factory's.We have strict workmanship,fine quality,due to the efforts of everyone.Strengthen the attention to each link,in pursuit of perfect quality of products; 2.One year warranty time; 3.Strong after-service team working for you; 4.Strong R&D team to be sure our factory has new models developed every year; Where to use:Industrial and mine enterprises,transportation,oil depot,gas station,construction site, and farm,even vehicle-mounted,garage,carport; Packaging Details: 1.1 Piece by Non-fumigation wooden case; 2.Fuel dispenser host; 3.Self-styled nozzle; 4.Outlet tube; 5.Transparent oil inlet; 6.Y type filter; 7.Filter screen; 8.Instruction book.

Feature: 1.Streamlined appearance design: soft lines, no edges and corners, beautiful; 2.Noiseless: Domestic first mute type fuel dispenser in China, it very quiet when them are working, refused to noise interference; 3.Continuous gas three hours without a fever burning motor, through the continuous pumping of oil for 24 hours and severe testing (domestic of same as tanker filling oil 20 minutes on heating, burning motor); 4.Folding mobile handle, easy to move; 5.Unique to shoot up, close the gun shut function, to achieve remote boot, shutdown, man-machine integration; 6.Double-tiers-filtering ; 7.With double-layer steel wire mesh, wear-resisting, corrosion resistance, pressure resistant tubing; 8.Unique capacitor protection design for control board to provide security barriers. Applicable medium:Diesel ,kerosene Flow rate:20-50L/min; Main power supply:12V/24V Head/Suction:20m/4m; Revolving speed :2850r/min Power:500W; Inhalation caliber:25mm; Discharge caliber:25mm; Accuracy:0.5%; Voltage:3Bar; Single range:0.0-$9999.9L Accumulative range:0-99999L; Setting range:0.0-99.99 Display range:0-99999; Metering volume:5L Size:400*390*485mm Weight:25.3KG. Packaging Details: 1.One piece by Non-fumigation wooden case; 2.Fuel dispenser host; 3.Self-styled nozzle; 4.Outlet tube; 5.Transparent oil inlet; 6.Y type filter; 7.Filter screen; 8.Instruction book.

1. DSHQ48 High Resolution Seismograph is produced on the basis of DSHQ24 seismograph and combined with China national situation to work under a new type Chinese WINXP system. The design and manufacturing into the valuable experience of seismic instruments, also absorbs today's advanced electronic technologies and design concepts, it is a leading seismograph multi-function, high accuracy, high speed, high reliability, good man-machine interface features and scalability. 2. The Instrument can be used a hammer, electric spark or explosion as the excitation source, with exploration depth from a few meters to a thousand meters; also delay function can be used to obtain Department of stratum deeper underground seismic data. 3. Applicable Methods are: Reflection, refraction, surface wave exploration, pile testing, microtremor measurement, high-density seismic imaging, vibration testing, measurement and shear-wave seismic exploration methods, widely used in water conservancy, electric power, railways, bridges, urban construction, transportation and other areas of engineering geological exploration, also applies to oil, coal, uranium mining and groundwater exploration and other fields. Main Applications • Reflection and Refraction Exploration: Bedrock embedded depth, shape and regularities of distribution research, hydrological and engineering and environmental geological basic investigation. Shear Wave Velocity Test: Measurement of rock mass elasticity parameters, etc. • Surface Wave Prospecting: Cover layer investigation; weathering zone investigation; underground cavity and diseased geologic body survey; subgrade, levee, slope disease investigation. • High-density Multi-wave Seismic Imaging: Cavity investigation of ground base and subgrade (roadbed), cave surveying, etc. • Quality Inspection of Civil Engineering; Bridge pier and building pile foundation detecting, etc. • Safety Evaluation of City Blasting Vibration: All kinds of safety monitoring of blasting vibration. • Main FeaturesAdopt the latest high-speed, high-precision real 24-bit A/D converter. Maximum sampling interval for 48 channels in simultaneous sampling is 31.25us, reaching international advanced level. • Maximum sampling interval for single channel is up to 10us. Can easily complete seismic data acquisition, and data processing • Not only use the advanced wave filter with ultra-low distortion performance, better than 120 dB, with external suppression (cut-off frequency automatically changes with sampling frequency); meanwhile, various digital wave filters (high, low, band pass wave filters) are set in the software, with their cut-off frequency being set artificially. • Brand-new overall structure design, which allows more reasonable view to facilitate the operation. • Support coverage measurement; • Provided with overlaying switch and overlaying cable manufactured by our factory, the application in various reflection, refraction, reflex measurement for field exploration can be facilitated, thus greatly improving the efficiency of field work. • DSHQ48 high-resolution seismograph can support 12-channel and 24-channel overlaying measurement without external configuration Built-in unique instrument detection system. Self-checking acquisition, data computing, self-checking report can automatically generated the output. Field make-and-break test for geophone and jug lines, full waveform noise monitoring Support multiple (at Windows interface) processing software: Superficial reflex processing, refraction, surface wave shear wave package, blasting, pulsating, high-density seismic imaging processing software Clock: Annual timing clock, file recording time will be stored in along with parameters. Main Technical Specifications Computer Configuration: Military Grade PC104 Control Computer P4 (933MHz); Memory: 256MB; Hard Disk: no smaller than 80GB Operating System: win-XP Display: 1024x768 dot matrix, high brightness TFT (true color) LED. Input Device: Equipped with suitable field-use membrane keyboard and touch screen; can also be connected with PS / 2 computer keyboard and mouse; provided with handwriting tablet. Interface: Dual USB interface, PS/2 keyboard, mouse interface, parallel port, Ethernet port, etc. Removable Storage: USB disk, or adopting mobile hard disk drive, USB mobile drive, etc. Frequency Response Range: 0.1Hz~4kHz Noise: smaller than 1 V at full-frequency state Sampling Time Delay: 0~9999ms Conformity: amplitude conformity better than ¡À0.02%; phase conformity: better than ¡À0.01ms Sampling Rate: 10¦Ìs/31.25¦Ìs/62.5¦Ìs/125¦Ìs/250¦Ìs/500¦Ìs/1 ms/2 ms/4 ms/8 ms/16ms/32ms-400ms several taps Number of Sampling Points: 512, 1024, 2048, 4096, 8192, 16384, etc., maximum record up to 32768; Preamplifier Gain: Every six channels as a group, optionally chosen by software: 64 times (36dB), 16 times (24dB), 4 times (12dB), 1times; A/D Converter: Adopt the latest, ultra high speed ¦²-¦¤24 bit A/D converter; Alias Filter: Automatic tracking along with the sampling rate; -3dB, down to 120dB at the place with 0.216 times of sampling rate; and provided with various digital wave filters, cutoff frequency (at the place with -3dB) if required Supported Data Format: SEG-2, SEG-Y, CSP Trigger Mode: Internal and external triggered by hammer switch; triggered via blasting, and electric spark; also triggered by wire-breaking or connecting

About Steel re-Rolling Mill Steel Re-rolling is a major steel section and bar producing technology used in India and abroad. Since its inception in India with setting up of first re-rolling mill in Kanpur in 1928, this technology has contributed significant steelmaking capacity in secondary steel sector in India. Air Pollution Depending upon the fuel used in heating the furnace of a Steel Re-rolling Mill, the characteristics of flue gases may vary. For coal fired furnaces they may consist of gaseous as well as particulate pollutants. For oil or gas fired furnaces, these flue gases may consist of just gaseous pollutants. The flue gases may also be corrosive in nature. Selection of Technology for Air Pollution Control Device Selection of Technology for Equipment in an Air Pollution Control System in case of a Steel Re-rolling Mill depends upon the fuel to be used : a. Scrubber based System for Oil / Gas Fired Furnaces b. Cyclone and Scrubber based System for Coal Fired Furnaces About Scrubber based System for Oil / Gas Fired Furnaces Characteristics of Air Pollution Generated In Induction Furnace 1 Pollutants : Dust & Gases such as NO , SO , CO, Co x 2 2 2 Concentration : SPM - 1200-1500 mg/Nm (Maximum, in coal fired) 3 So - 800-1000 mg/Nm 2 4 NO - 20-50 mg/Nm x 5 Temperature : At Suction Point: 250-300 C 6 Nature of Dust : Slightly Sticky, Non Abrasive and Non Explosive Control Practices The control practice adopted in controlling air pollution in this industry mainly depends upon following parameters : 1 Dust/Gas Concentration at inlet 2 Discharge Standards 3 Temperature of Flue Gases 4 Nature of Pollutant i.e. Dust (Particulate) or Gaseous 5 Nature of Dust i.e. Sticky, Abrasive 6 Nature of Gases i.e. Corrosive, Non Corrosive Working of Equipment 1. Ducts & Bends : 2. Scrubber : 3. ID Fan : 4. Stack (Chimney) : About Cyclone and Scrubber based System for Coal Fired Furnace Working of Equipment 1. Ducts & Bends : 2. Cyclone : 3. Scrubber : 4. ID Fan : 5. Stack (Chimney) : Discharge Characteristics as Per Norms 1 Dust : Less than 150 mg/ Nm 2 Temp : Less than 80-100 C 3 Gases : Traces of SO , NO , Co , Co.

Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Gandong saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber. Application Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals. Features The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.

Character & Power: Machine Width: 1.6, 1.8, 2.2, 3.0m Roll weight (Maximum): 100kg Roll diameter (Maximum): 60cm Spreading height: 25cm Maximum speed per minute: 80m Operator side: Right (Normal)/Left Voltage: Single phase, 220v/50Hz Power supply: 1.7kw Standard Equipment: Loosing Fabric Device Automatic loading and unloading rolls Automatic Edge Controlling Device Automatic lifting Device Automatic Fabric Cutting Device Spreading Layers Counter Clamp Device Digital Touch Screen Security sensors emergency stop Other technical characteristics Ability to program all steps in a spread Diffuse reflection sensor ensure fabric edge alignment Encoder counter ensure high accuracy Automatic start checks control when machine is switched on Four-wheel drive (2*2) Self-adjusting brakes ramp according to speed of machine and programmed acceleration Stop when material is used up Spreading any kind of fabric: Knitting fabric and woven fabric Unidirectional cutting spreading and Zigzag spreading Optional Devices Folding platform Zigzag device & fixed clamp together Air-blowing table Power track Operator platform Mobile table Automatic loading device Unfolding/spreading device.

Global Tech GFP EoP, Ethernet over PDH, Interface Converter can transport GFP encapsulated Ethernet service over 1 up to 16 E1 channels. Fully comply with G.7041, G.7042, G.7043, and G.8040 recommendations, GFP Interface Converter can cooperate with the products from other manufactures adopted the same recommendations. GFP Interface Converters can transform traffic between E1 interface and Ethernet interface, and utilize current adequate E1 resources to extend the Ethernet transmission distance and coverage range without any network reformation. Feature * GFP encapsulation based Ethernet interface can cooperate with other vendors GFP based Ethernet equipments. * Up to 4 Ethernet interfaces. * Switching Ethernet interfaces isolation is configured by E1 channel or 802.1Q through NMS, disabled by default. * Automatically Fault Shifting function. * Support Telnet/Web browser/SNMP NMS management. Strong NMS function to support client managing in complicate topology. Technical Parameter * E1 Interface - Bit Rate: 1.984M bps - Coding: HDB3 - Impedance: 75, Unbalanced/ 120, Balanced - Port Feature: G.703 and G.704 - Connector: Q9 (75)/ RJ45 or RJ48-C (120) * Ethernet Interface - 10M/100M auto negotiation - Full/half duplex auto negotiation - Port Quantity: 1, up to 4 ports - MDI/MDIX auto negotiation - Related Standard: G.7041, G.7042, G.7043, G.8040 * Optical Interface - Wavelength: 850nm, 1310nm, 1550nm - Optical Port: Single Fiber/ Dual Fiber, FC/SC, Transmission Distance, SMF/ MMF optional. - Tx Power: > -8dBm, 40km - Rx Sensitivity: < -36dBm, 40km * Operation Environment - Working Temperature: -10~ 55 - Storage Temperature: -40~ 70 - Relative Humidity: 5%~ 95%, non-condensing - No corrosive and solvent gas, no dust and heavy EMI - Power Supply: AC 180~ 260V, Desktop, DC -72~ -36V, Chassis - Support 1+1 dual power supply in chassis configuration - Typical Consumption: 5W, Desktop 75W, Chassis - Physical Dimension: Desktop, 19¡± Rack-mountable: 218mm(W)*44mm(H)*136mm(D) Chassis: 483mm(W)*171mm(H)*177mm(D).

The JLCSD-150 Cutter Suction Dredger of steel construction, non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area “A” or below the “A”-line specified in code for inland river steel engineering ship manufacture of P.R.China. The dredger can be used to excavate and transport cohesive sediment below the class ? specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China. In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc. It’s hull consists of a main pontoon and two side pontoons, which is to be easy to dismantle or mount for transportation by road, rail or water, and is to be easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the 2 side pontoons serve as fuel bunkers,ballast tanks and storage tanks. The dredger is powered by diesel engines. The main diesel engine is to drive the dredge pump, and in the free part of the engine, one set of power distributor is equipped, to supply power for all other equipments such as cutter, swing and ladder winches, and the spud rams etc. The spacious control cabin is ergonomically designed with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only two operators can control all the dredger in the operation room. The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.

Negative Pressure Wound Drainage Machine Intelligence Product Model: MAX400-A1 Product Composition: Host, power cord, liquid collection bottle. The host is mainly composed of vacuum pump, control circuit, pressure sensor, CPU, control panel and display, chassis and built-in lithium battery. Application: Suitable for acute wounds, chronic diabetic wounds and wounds drainage of more exudate after surgery. Product Feature: 1. With ultra-low negative pressure design (-50mmHg to -450mmHg), which is continuously adjustable 2. With super-smart design and multiple operating mode which is more practical 3. With stable performance and long life which can operate more than 10,000 hours continuously. 4. The elaborate designed muffler system controls running noise of the device in a very low range (less than 45 dB), which does not affect the patientâ??s rest. 5. With microcomputer chip controlled, it has high accuracy and user-friendly operation interface. 6. Intelligent memory system can automatically record the parameters and modes in the last setup, free from repeatedly setting after each starting up. 7. LCD digital display makes it convenient for users to adjust and operate. 8. Multiple safe power supply solutions: a. AC and DC power supply is adopted, and the host is a full DC power supply, no danger of electric shock; b. Its build-in spare battery may still endure for four hours after a power failure, while it can last 8 hours in intermittent mode; c. A 12V 5A vehicle DC power supply can also be used to ensure the continuous treatment of patients with negative pressure drainage during transfer or going out. 9. Equipped with overflow alarm device, the unit will automatically stop in service and alarm when the dirty liquid reaches the warning line, to prevent the sewage from entering the host and to avoid secondary pollution and damage. 10. With the function of automatic gas-leak alarm, the unit will then spontaneously stop and alarm when the negative pressure value remains no change within 10 minutes after the operation. 11. Multiple safety protections: air-leak alarm, automatic overheat prevention, overflow prevention, etc. Product Property: Adjusting scope: 10mmHg; Negative pressure range: -50mmHg-450mmHg; Pressure display error: + 0.2%; Suction flow: 1.5L / min-8.0L / min; Noise: not more than 45Db; External power supply: 12V 5A DC switch power supply(medically certified), the host, DC powered, has no risk of electric shock; Operation status: continuous and intermittent Contraindication: Debridement undone or wound with the necrotic eschar; Wound with tumor tissue; Sinus connected with the organs; Wound with great vessels or organs exposed.

39- liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to 10. It is left-type or right-type according to user's demand. Structure and features: Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts: (1). Tank The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp. In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate. Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning. The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process. (2)Impeller system Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately. The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19. (3). Shaving foam device Foam is scraped using the rotary scraper along the flotation machine, scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt. Technical parameters (1)Tank size: L¡ÁW¡ÁH 315¡Á315mm¡Á527mm (2)The effective volume: 39 liters (3)The flow of the pulp is calculated according to the production capacity (4)Aeration rate: 35-45 liters / min (5)Impeller diameter:200mm (6)Impeller speed: 809m/s (7)Impeller circumferential speed:8.14m/s (8)Scraper rpm: big wheel/small wheel 21r/min /13r/min (9)Motor: Model y900l-4 voltage :220/380V. Power:1.5KW rpm: 1400 r / min (10)Assembly method: Left-style (11)The outline size of machine: H: 930mm, W: 762mm, L (including 2 slots)1081mm (12)Total weight:(including 2 slot motors).

Model: RTU5025 Name: GSM 3G Gate Opener Access Control The GSM 3G Gate Opener is special for authorized door access, and require turning ON/OFF your equipments remotely with a FREE call from your mobile phone and protect your assets. It supports to open the gate at the specified time. Also, the historical data can be read out via USB port. The RTU5025 supports GPRS communication function, very suitable for remotely monitoring outdoor cabinets and stations of telecom company, traffic origination, power supply company and so on. It can be authorized different repair person or maintains person to open the cabinets or stations at the specified time, saving time to get the keys for the locks and saving cost to repair or replace the locks while the person lost the key. And also can remote monitoring the door is opened or closed, or illegal opened. 1. Quad-band, 3G WCDMA, 3G CDMA, can work in the worldwide GSM and 3G Networks; 2. No call charges. the GPRS-3G Gate Opener rejects the call from authorized number then carries out the turn ON/OFF action on the first 'ring'; 3. Multiple applications. (gates, bollards, barriers, garage doors, shutters and access doors or machines); 4. Add or remove users by SMS Text command or over GPRS Network or USB Port; 5. No need to provide a remote control or keys for different users; 6. Up to 999 authorized phone numbers can be configured at the specified time; 7. Remotely upload the historical data or via USB port, the record capacity is 10000events; 8. 1 Digital inputs for motion sensors or other sensors to protect your door and windows; 9. 1 input special for monitoring door status and automatically armed when door closed; 10. 1 output with relay rating 3A/240VAC for connecting the switch of the door or machines;

OFS Gigabit Single Fiber Converter can convert Optical£­Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 90km through single optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. It must be used in couples because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters. Main features The transmission of a channel signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber. Auto negotiation function allows UTP port to auto select 10/100/1000M and Full Duplex or Half Duplex The UTP port supports MDI / MDI-X auto crossover. Supporting the max 1536 bytes packets Adopting internal power supply to insure equipment at long-hours work stably. Technical Specifications Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX MAC address table: 4K Data Buffer: 256K Connector: UTP: RJ-45,10/100/1000Mbps Fiber: SC,1000Mbps. Cable : UTP: Cat.5e or Cat.6 (the max distance up to 100m) Fiber (singlemode): 8.3/125, 8.7/125, 9/125, 10/125µm (the max distance up to 90km) Flow control: Full Duplex: IEEE802.3x Half Duplex: back pressure Power: AC. 220V(170-260V) 50Hz; DC. 5V 2A Ambient temperature:0 ¡« +50 Storage temperature:-20 ¡« +70 Humidity:5% ¡« 90% Dimensions:40 (high) x 110(width) x 140 (length) mm.