Jiangixi Gandong Mining Equipment Machinery Manufacturer Factory

Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Gandong saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber. Application Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals. Features The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.

Spirals are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream. í¦Gandongí¦ Spirals are made of polyurethane lined fiber glass with wearable corundum inner surface. Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirements. Application Rutile, ilmenite and zircon concentration Iron ore, chromite and manganese beneficiation Tin, tantalum and ore concentration Gold, native copper and base metal recovery Silica sands processing Titano-magnetite concentration Feature & Benefits Reasonable structure and small occupation area High recovery, high efficiency, and precise separation, Light in weight, rust and corrosion resistant; Simple installation and Minimal maintenance requirements Low operating cost and long operating life Reliable running with minimal operator attention Strong adaptability to fluctuation of feeding amount, density, size and grade.

Application of shaking table Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials. There are many applications where the concentrating table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals. Construction Head Motion: The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump. Decks: The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at f+50f¦. Feed and Water Box: A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water. Base: A choice of ordinary type, groove steel support or big channel steel support is available. Technical Specification The Gandong Shaking Tables have three distinct deck designs available. The course ore deck is designed for recovering particles sized from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.05 mm to 0.074 mm.

Concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Three models are available. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of í¬0. 074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.

Supplier: Hss twist drill bits, sds plus hammer drill bit, hss machine taps, hss step drill bits, hss center drill bits, wood working drill bits, masonry drill bits, end mills, diamond cutting disc, tct saw blade

Jig is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance. Sawtooth wave jig is a new type of jigs,It is one of the types of modern gravity separation equipment. New it has formed series whose use is expanded. Such type of jig uses electromagnetic stepless speed regulation which features even rotation, smooth ore current, strong adaptability to selected materials, good separation effects of medium and fine grains, and water saving. Sawtooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level, it is one of the ideal energy-saving gravity concentration equipments. Features: High quality ,precision manufacturing High capacity, high recovery ratio, Widely use range, large range of separation size, Energy conversation, no pollution Simple installation and easy to maintenance The work safe and reliable, long working life Technical Parameters Model JT1-1 JT2-2 JT3-1 JT4-2 JT5-2 Jigging Chamber Shape trapezoidal rectangular trapezoidal rectangular trapezoidal Length (mm) 450~900 1070 960~2000 1510 1200~2000 Width (mm) 1500 1070 1950 1510 3150 Column Number single single single single single Chamber Number (one) 1 2 1 2 2 Single Area (m2) 1 1.14 3.3 2.28 2.12(single) 2.77(double) Aggregate Area (m2) 1 2.28 3.3 4.56 5 Feeding Particle Size(mm) 5 5