39- liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to 10. It is left-type or right-type according to user's demand.
Structure and features:
Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts:
(1). Tank
The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp.
In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate.
Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning.
The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process.
(2)Impeller system
Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately.
The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19.
(3). Shaving foam device
Foam is scraped using the rotary scraper along the flotation machine, scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt.
Technical parameters
(1)Tank size: L¡ÁW¡ÁH 315¡Á315mm¡Á527mm
(2)The effective volume: 39 liters
(3)The flow of the pulp is calculated according to the production capacity
(4)Aeration rate: 35-45 liters / min
(5)Impeller diameter:200mm
(6)Impeller speed: 809m/s
(7)Impeller circumferential speed:8.14m/s
(8)Scraper rpm: big wheel/small wheel 21r/min /13r/min
(9)Motor: Model y900l-4 voltage :220/380V.
Power:1.5KW rpm: 1400 r / min
(10)Assembly method: Left-style
(11)The outline size of machine: H: 930mm, W: 762mm, L (including 2 slots)1081mm
(12)Total weight:(including 2 slot motors).
Application:mines, universities and colleges, scientific research. The main models: the XFD single slot flotation machine, FX mechanical agitation of continuous flotation machine, XFDC single slot flotation machine, KC Precision Vertical flotation machine, XFG hang slot flotation machine, XFL ring shot continuous flotation machineseries of experiments with the flotation machine. ModelVolume of tankImpeller diameteImpeller speedScraper speedPowerOverall dimensionsWeight UnitLmmr/minr/minwmmkg XFD0.5L1.5452130-259015/3090635/338/70030 XFD0.75L0.75452130-259015/3090635/338/70030 XFD1L1551700-210015/3090635/338/70030 XFD1.5L1.5601590-191015/3090635/338/70033 XFD3L3701544-18908/20120683/350/82250 XFD8L810014008.6/13/17250740/350/86771
Working Principle of laboratory ball mill When the laboratory ball mill works, motor and speed reducer transmit torque force to big and small gears of laboratory ball mill, so the barrel rotates.When the barrel rotates, Steel balls or other grinding media in the barrel are lifted to a certain height and fall down freely, so materials in the barrel are impacted. Grinding media mixing with materials impact and grind materials continuously. The grinding media and materials impact and grind each other when the laboratory ball mill rotates continuously. The final product will be discharged from outlet when it meets the request, so the grinding process is finished application range, simple structure and convenient maintenance.
Laboratory Liquid Filling and Stoppering Machine Vacuum Stoppering system to minimize entrapped filling & drip-free. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Optional Laminar Air Flow Booth. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Optional 100% Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check.
Supplier: Laboratory equipment, solutions, reagents, chemical, consumables, spares, glassware, culture media, certified reference standards, industrial instruments, and industrial chemicals
Services: Importation, transportation, exportation, and shipping, repair, service, and maintenance
Buyer: Icumsa 45 sugar
Supplier: Laboratory balance and equipment, jewellery balance and equipment
Services: Export
Supplier: Mechanical lab equipment, electronics lab trainers, robotics lab, CNC machines
The BOD (Biochemical Oxygen Demand) Incubator is a crucial medical equipment used in hospitals for environmental and medical research. This specialized incubator maintains a stable temperature, typically 20�°C, 27�°C, or 37�°C, providing an ideal environment for biological sample incubation and testing. It features precise digital controls and uniform temperature distribution to ensure accurate and reproducible results. The interior is spacious, accommodating various sample sizes and containers. With energy-efficient design and robust construction, it's reliable for long-term operation. Hospitals rely on BOD incubators for critical applications, including wastewater analysis, microbiological studies, and medical research, ensuring the highest standards of accuracy and consistency.
Supplier: Pharmaceutical machinery, pharma machine, pharma machinery, pharmaceutical machine, washing machine
Supplier: IPL(intensed pulse light) ipl+rf beauty equipments, 808nm diode laser hair removal machine, co2 fractional laser with vaginal tips, ultrosonic rf fat sliming machine
