Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Parameter Rated power(W) : 10000 Rated voltage(DCV) : 240 Rated current(DCA) : 42 Rotor diameter(m) : 8.0 Blade material : GFRP Rotation direction : Clockwise Start-up wind speed(m/s) : 2.5 Rated wind speed(m/s) : 10 Cut-out wind speed(m/s) : 16 Survival wind speed(m/s) : 45 Net weight(T) : 1.0 Wind turbine type : Upwind Rated Rotating speed(RPM) : 180 Blades No. : 3 Hydraulic tower height (m) : 12 Yaw mechanism : Electrical Annual yield(kwh) : 24000 Yaw mode : Auto/manual Efficiency : 0.85 Wind turbine tilt-angle : 6¡ã Protection mode : Yaw -Hydraulic brake -Dumpload. Plywood cases and weave bag.
Numbers of blade(P): 3 Materials of blade: FRP complex resin Diameter of wind turbines(m): 8.0 Startup wind speed: 3 Rated wind speed(m/s): 10 Working wind speed (m/s): 3-25 Max. wind speed(m/s): 45 Rated speed(rotate/minute): 220 Wind energy ratio(%): 0.42 Generator: Permanent magnetic generator Generator rated power(W): 10000 Max.output power(W): 12000 Output voltage(V): 240vDC/360vDC Rated current(A): 25.3 Timing manner: Automatically adjust the windward angle Over speed Protection: AutoFurl Temperature Range: -40 ~ +60 Deg.C Tower: Guy wire type/ Free standing type Altitude of tower(m): 12/11.5 Charging control: Automatic Weight (kg): 1200 Power generation of years(kwh): 50000 Inverter power supply: Square wave Time of charging(h): 20 Battery: 12v200AH X40pcs Generator: 133*106*141cm Blade:402*33*52cm Tower: (400*38*38cm)*3 Inverter:74*47*65cm Controller: 70*60*91cm False ogive:88*85*64cm Accessories: 106*54*47cm
In recent years, there has been significant increase in wind power generation capacity in India. We can supply different capacity wind turbines and related products. These are used for electricity generation and other purposes like pumping water, milling wheat etc For more details please contact us.
Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise.
Vertical wind turbine, no noise, low start-up wind speed, maglev structure, light weight; no-noise.
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
Output voltage(on-grid): dc 50-375v Output voltage(off-grid): dc 110v Over speed protection & braking system: Speed control style: pitch control system Brake style: automatic hydraulic brake Advantages of vawt: Nearly quiet Birds friendly More safety features Wonderful performance at low wind speed Captures wind from all directions Longer working life Less maintenance Less requirements on foundation Advantages over other vawt: High efficiency Pitch control to govern speed Automatic hydraulic brake 2375kg
FD8.0-10KW Technical Parameter: Power : 10KW Blade Diameter: 8.0m Rated Rotor Speed: 160r/min Rated Speed: 10m/s Rated Power: 10KW Max Power: 14kw Output Voltage: 380v Start Up Wind Speed: 3(m/s) Work Speed: 3-20(m/s) Security Wind Speed: 40(m/s) Working Temperature : -40--+40 Height of Guy Cable Tower: 12m Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 30pcs 12v 200AH. Can Supply Power for: Small Village,Air-Condition, Refrigerator, Washing Machine,Water Pump, Electric Pan, Color TV, Lighter, Fanner, Charger. Controller & inverter: Model: WWS100A-220 Rated Wind Turbine Power: 10kW Rated Solar Power: 3kW Rated Battery Voltage: 220V Wind Turbine Maximum Input Current: 90A Wind Turbine Maximum Input Power: 20KW Unload Voltage factory default : 252 V Unload Current factory default : 40A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current , PV Voltage, PV Charge Current, PV Power, Battery Voltage Working Temperature &Humidity: -20~+50 /35~85%RH Without Condensation Temperature Compensation optional : 4mV/ /2V , 35 --+80 , Precision 1 Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI100-220-S Rated Output Capacity : 10kVA Rated Battery Voltage : 216VDC Over Voltage Shutoff: 306VDC Over Voltage Recovery: 297VDC Under Voltage Shutoff: 189VDC Under Voltage Recovery: 216VDC No Load Loss: 0.55A Output Wave Form: Pure Sine Wave Display Mode: LCD Display parameters: Battery Voltage, Output Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4 Output Frequency: 50/60 Hz0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maximum 90% Noise 1m : 40dB Insulating Strength: 1500VAC,1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%, no condensing. in plywood.
basic parameters rated power(kw) 10 survivel wind speed(m/s) 45 max power(kw) 11 wind wheel diameterm(m) 7.6 rated voltage(v) 384/560 blade length(m) 3.8 rated revolution(r/m) 200 swept area(m2) 45.34 cut-in speed(m/s) 1 blade material FRP cut-off wind speed(m/s) 25 generator life 20 sone key technology control method adjust speed method centrifuge variable pitch brake method electromagnetic generator generator configuration 3-phase 380/220v 50/60hz generator type 3-phase permanent magnet protect class
Aluminum blades are durable, strong and not afraid of any external influences. At the same time, they are heavier than plastic ones and require careful wheel balancing.
Rated Power : 30KW Shaft Power : 34.5KW Rated Wind Speed : 10m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.48 Rotor Diameter : 12m Blade Length : 5.58m Tip Chord : 230mm Max Chord : 783mm Material : FRP Weight(Kg/pcs) : 112 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 248mm
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 100KW Shaft Power : 120KW Rated Wind Speed : 12m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.43 Rotor Diameter : 19.1m Blade Length : 9.2m Tip Chord : 120mm Max Chord : 1070mm Material : FRP Weight(Kg/pcs) : 278 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 360mm.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Rated power: 10kw Rated wind speed: 12m/s Cut-in speed: 4m/s Cut-out speed: 25m/s Subsistence wind speed: 55m/s Mill diameter: 6m Mill height: 6.2m Mill weight: 2375kg Tower height & weight: 5.5m (1000kg) Generator type: pmg 3 phase Generator rated voltage: ac 250v Generator rated current: ac 23a Generator protection level: ip54 Controller output voltage (on-grid): dc 80-400v Controller output voltage (off-grid): dc 110v Governed speed style: aerodynamic pitch control Brake style: automatic brake system
Rated Power: 10kw Rated Wind Speed: 12m/s Cut-In Speed: 4m/s Cut-out Speed: 25m/s Subsistence wind speed: 55m/s Mill Diameter: 6m Mill Height: 6.2m Mill Weight: 2375kg Tower Height & Weight: 5.5m (1000kg) Generator type: PMG 3 phase Generator Rated Voltage: AC 250V Generator Rated Current: AC 23A Generator Protection Level: IP54 Controller Output Voltage (On-grid): DC 60-375V Controller Output Voltage (Off-grid): DC 110V Governed Speed Style: Aerodynamic Pitch Control Brake Style: Automatic hydraulic Brake system Mill Weight: 2375kg
TL-10KW's parameters and quotation rotor diameter£¨m£©7speed adjustment wayelectromagnetism plus drift blade materialintensive fiberglassstop wayelectromagnetism plus manual operation blade quantity3generator typepermanent magnetism of three-phase current rated speed(m/s)12rated power10KW start up wind speed(m/s)4max power15KW work speed(m/s)4-35rated rotor speed(r/min£©220 security wind speed(m/s)45work voltageDC120V-500V start up force moment(n/m)7.5weight of main body£¨kg)1200.
