Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Quantity: 100,000 - 1,000,000 METRIC TON per month. Quality: Complies with European. Standard EN 590. Delivery: CIF ASWP / DIP & PAY. Price CIF : $ 360 Gross / $ 340 Net Per Metric Ton. Price FOB : $ 340 Gross / $ 320 Net Per Metric Ton
Origin: Russia Quantity: 10 000 MT/per month / 100,000 MT per month Delivery: CIF
The Low shrinkage oil is a distillate fuel manufactured from a selected crude oil; this Diesel Fuel contains 10 parts per million of sulfur (
We manufacture diesel fuel with substantially lowered sulfur content. Since 2006, almost all of the petroleum-based diesel fuel available in Europe and North America has been of a ULSD type. The move to lower sulfur content allows for the application of advanced emissions control technologies that substantially lower the harmful emissions from diesel combustion. Testing by engine manufacturers and regulatory bodies have found the use of emissions control devices in conjunction with ULSD can reduce the exhaust output of ozone precursors and particulate matter to near-zero levels.
RUSSIAN ORIGIN ULTRA LOW SULFUR DIESEL Quality: 130 - 180 Flashpoint / 15 -1500 PPM Sulfur Level Minimum Quantity: 100,000 Metric Tons per Month Maximum Quantity: 10,000,000 Metric Tons per Month FOB Target Price: Gross USD $220.00 / Net USD $215.00
Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply Price: Gross $370.00 USD/$350 .00 USD Net on FOB Price: Gross $390.00 USD/$380 .00 USD Net on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD
Origin: Kazakhstan Trial shipment: 100-200 MT (+/-5%) Monthly Quantity: 500,000 MT per Months x 12 Total Quantity: 6,000,000 MT Gross USD $310, Net $300 Commission: Seller side $5.00, Buyer side $5.00 Payment: MT103, DLC, SBLC, LC Inspection: SGS, intertek, CIQ Delivery: FOB, Dip & Pay Ports Rotterdam, and Houston
We Neptune One Trading and Petroleum Services, located in Dubai, U.A.E. We are an international trading company deals with import - export of different products. Our founders over the years have had experience in original commodities such as Ultra-low-sulfur diesel (ULSD) EN590 10PPM , UREA, MOP, DAP, Wheat, We are proud to present them at competitive prices on the market.
Our Group of Legacy Refineries Offers the following available in Rotterdam for FOB Tank to Tank Transfer ULSD -EN590 10ppm Minimum Quantity: 25,000 metric tons per month Maximum Quantity: 300,000 metric tons per month CIF Price: $ 540.00 per metric ton FOB Price: $ 560.00 per metric ton Direct Mandate Agent Located in United States. Please reach out for further details.
FOB MOQ. : 50.000MT PRICE : USD430/MT Commision : US$ 5/ MT for Buyer's Side US$ 5/ MT for Seller s Side TRANSACTION PROCEDURES 1. Buyer issues Company Profile ICPO Buyer's Passport and Tank Storage Agreement TSA 2.Seller verifies Buyer Company and Registration including Buyer's TSA and issues Commercial Invoice for the trial delivery. 3.Upon Buyer sign back of Commercial InvoiceBuyer request buyer's tank farm invoice for injection time to Seller. 4.Seller processes payment to Buyer's tank farm per the invoice and issues Injection Schedule and pays for the Injection Fee and Buyer's tank farm issues TSR and ATV. 5.Upon completion of injection into Buyer's tanks by seller, Seller issues DTA in the same day. 6.Buyer conducts the dip test at Buyer's expense. 7.Upon successful inspection report of Q&Q, Seller issues ATSC and Certificate of Origin to Buyer and Buyer pays for the product in full by Mt103/TT within 24 hours and Seller transfer the Title. 8.Seller and Buyer sign 12 months contract.
EN590 Diesel-10PPM Ultra Low Sulfur Diesel (ULSD) is a premium diesel fuel. EN 590 10 ppm is� a type of diesel fuel with a sulfur content of 10 parts per million (ppm).� It\'s a low- emission diesel fuel that\'s ideal for power generators, tower cranes, construction trucks, and excavators with diesel engines.� It conforms the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.
We sell Oil and Gas Products Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6
EN590 10ppm SPOT FOB Rotterdam price $515 per mt FOB Rotterdam price $630 per mt FOB DOHA: $498 per mt CIF ANY PORT: $533 per mt
For latest pricing Enquiry., Please contact US with phone number and contact details
Ultra low sulfur diesel.
Ultra low sulfur diesel.