Non Asbestos Gasket Suppliers and Manufacturers

Non-asbestos Gasket Good Alternative To Compressed Asbestos Gasket Non-Asbestos Gasket is a general-purpose sheet material reinforced with high-grade asbestos-free fibers and bonded with heat-resistant nitrile rubber. It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket. The gasket is suitable for engineering, automobile, chemical, oil & gas, petrochemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off. COMMON SPECIFICATIONS Thickness (mm) 0.46.0 Available size (m) 1.5 1.6, 1.5 2, 1.5 3, 1.5 4, 1.5 6 Maximum continuous working temperature 650 °F Steam max continuous working temperature -100 °F Maximum pressure 85 bar Tensile strength (MPa) 13 Residual stress (MPa) > 22 Compressibility 6% Cold compressibility 8% Cold recovery 3% Hot creep 22% Hot recovery 2% Density (g/cm3) 1.62.0 Gas permeability (mL/min)

We offer Non Asbestos Gaskets which are gaining significance due to the known hazards of asbestos made products. We offer a wide range of proven Compressed Non Asbestos Gaskets with high fluid media in addition to a few special applications. Our Non Asbestos Gaskets have high strength and durability. These Compressed Non Asbestos Gaskets remain in use even when exposed to very high temperature. Features : Thickness : 0.25 mm to 6mm High strength Excellent durability Can withstand up to 450oC temperature Incomparable chemical and steam resistance

Non-asbestos Gasketing Sheet is applied to the automobile,agricultural machinery,motorcycle,engineering machinery etc..the medium is the lubricating oil,the spacer material under150centigrade of suitable temperature. Whatsapp:86-13566083951 Standard Size:1000mmx1000mm,1000x1200mm,1000x500mm Thickness:0.5~2.0mm Color:Black,Grey,Green

Compressed non-asbestos fibre(CNAF) gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF). Compressed non-asbestos fibre(CNAF) sheet, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.5Mtr(Width) x 1.5Mtr(Length) 1.5Mtr(Length) x 1.5Mtr(Width) x 50cm(Height) Gross weight @ 200kgs

We can provide all kinds asbestos gasket sheet and non asbestos gasket sheet with good price. Thickness: 0.3 to 6mm 4500 x 1500mm, 4100 x 1500 mm, 3850 x 1300 mm, 3810 x 2700 mm 1500 x 2000 mm, 1500 x 1500 mm , 1500 x 1350 mm, 1500 x 1000 mm, 1270 x 1270 mm, The other size is optional or according to the requirements of customers. Packing: in roll or in wooden pallet of about 1000 kgs, 2000kgs net each.

Non asbestos sheet Length:1000mm;1350mm;2000mm;4000mm Width: 1500mm Density:1.8 to 2.0g/cm3 Working pressure:100 bar Working Temperature:370 D.C.(Color:Blue) Working Temperature:400 D.C.(Color:Black) Compressibility(astm f36): 7 to 17% Recovery(DASTM 13 16Hrs-300 D.C. - 50N/mm): 20 N/mm Gas infiltration(DIN 3535/4):0.5ml/min Immersion test (ASTM F146) Immersion in ASTM oil#3 under 5Hrs/150D.C. Thickness increase: 10% Tehsile strength:8N/mm Sulfuric-Acid under 48 Hrs/23D.C. Loss on ignition(DIN52911):26% Density(DIN3754): 1.85g/cm3 PH value:2 to 14

Non-asbestos joint sheet At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework. 1volume/polybag

Our range of Compressed Asbestos Gaskets is widely demanded in the market because of its outsatnding quality. Compressed Asbestos Fibre (CAF) Gaskets are manufactured from carefully selected chrysotile fibres, intimately blended with suitable heat resisting binders and fillers and vulcanized into sheets of homogenous compositions and uniform thickness. To avoid the necessity of producing perfect finish on the contact faces of a mechanical assembly, which is not only costly but quite often impracticable, a gasket of compressed asbestos fibre jointing enables a tight seal to be created and maintained between separable members. The seal is effected by the yielding, or the flow of the jointing material into the imperfections of the joint contact faces. In this way the gasket provides an unbroken barrier of homogenous structure through which no pathways exist for escape of the confined media. Features : Thickness : 0.25 mm to 6 mm

ASBESTOS GASKET IDEAL INSULATING AND CORROSION RESISTANT MATERIAL Asbestos Gasket is inexpensive, readily available and stable. It is fireproof and can withstand extreme heat making it the ideal thermal isolation material. As well, asbestos gaskets are non-corrosive, impervious to chemical reactions and non-conductive of electricity. It is widely used in exhaust systems, turbo chargers and cylinder. TYPES White fibrous chrysotile asbestos on a black background Chrysotile asbestos Grey acicular fiber amphibole asbestos on a black background Amphibole asbestos COMMON SPECIFICATIONS Thickness (mm) 0.46.0 Plate sizes (mm) 1000 1500, 1270 1270, 1270 1300, 1270 3810, 1300 1300, 1350 1350, 1350 1500, 1360 1500, 1500 1500, 1500 2000, 1500 3000, 1500 4000, 1500 4100, 1500 4500, 2000 3000 Maximum continuous working temperature 200 °C Steam max continuous working temperature 120 °C Maximum operating pressure 70 bar Maximum pressure (MPa) 1.5 Tensile strength (MPa) 6 Compressibility 12 ± 5 % Density (g/cm3) 1.62.0 Color red, green, blue, yellow, black, gray and more ple in.

Non Asbestos Gaskets.

Non Asbestos Gaskets..

We are manufacturer of caf industrial cut gasket as per drowing or standard , & spiral wound gaskets.

Our Valve Gaskets are of the superior quality and are used in different valves like Sluice Valves, Globe Valves, Gate Valves, Butterfly Valves, Double Beat Valves, etc. These Valve Gaskets have accurate dimension and are designed to fit perfectly in different valves. We make available Valve Gaskets in wide range of sizes to meet the diverse demands. We can supply all types of Gaskets and Packing which are fitted in various Valves. Features : Size : 0.15 NB to 1000NB

We meet the demands of different industries by offering the finest quality Engine Gaskets. These Engine Gaskets are fitted in different models of engines and are known for their high durability. We offer Engine Gaskets for various types of diesel engines, oil engines, etc. These Engine Gaskets are mostly made of Cellulose base fibers or CAF material. Our Engine Gaskets are highly resistant to wear-and-tear and remain in use for years. Features : Accurate dimension Long usable life Wear-and-tear resistant Resistant to high temperature and pressure

We cater to the demand of different industries for Flange Gaskets with accurate dimension. Our Flange Gaskets are manufactured in adherence to different international standards such as ANSI, DN, DIN, BS and Indian standards for all classes (from 15 NB to 1000 NB). Our Flange Gaskets have accurate dimension and they fit perfectly into different types of valves. Availability of Flange Gaskets in different specifications makes them even more demanded. Features : Accurate dimension Long usable life Wear-and-tear resistant Heat resistant

We are known as a Manufacturer and Supplier of superior quality Pump Gaskets. Our Pump Gaskets are demanded in Pump Industry for getting assured protection from leakage. These Pump Gaskets have accurate dimension and are made of high quality materials. These Pump Gaskets remain in use for a long time without any risk of wear-and-tear. Features : Industrial Pumps Agricultural Pumps Domestic Pumps Chemical Pumps

When it comes to highly durable Compressor Gaskets, our product is the best. Our Compressor Gaskets are made of high quality materials which remain intact for years. These Compressor Gaskets are widely used in various types of compressors like air compressors, screw compressors, etc. Our Compressor Gaskets can withstand high temperature & pressure and are resistant to wear-an-tear. Features : Accurate dimension Long usable life Wear-and-tear resistant Withstanding high temperature and pressure

We supply Pure PIFE (Teflon) Gaskets which have high chemical resistance, non-contamination and non corrosive properties. These Gaskets are suitable for Acidic media. Thickness : 0.5mm to 6 mm Features : Chemical resistance Non-corrosive Non-contaminating Odourless

Asbestos millboard, industrial insulation millboard, asbestos and non asbestos jointing gasket sheets, asbestos gaskets, flange gaskets, non asbestos gaskets.