Non-asbestos Gasket Good Alternative To Compressed Asbestos Gasket Non-Asbestos Gasket is a general-purpose sheet material reinforced with high-grade asbestos-free fibers and bonded with heat-resistant nitrile rubber. It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket. The gasket is suitable for engineering, automobile, chemical, oil & gas, petrochemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off. COMMON SPECIFICATIONS Thickness (mm) 0.46.0 Available size (m) 1.5 1.6, 1.5 2, 1.5 3, 1.5 4, 1.5 6 Maximum continuous working temperature 650 °F Steam max continuous working temperature -100 °F Maximum pressure 85 bar Tensile strength (MPa) 13 Residual stress (MPa) > 22 Compressibility 6% Cold compressibility 8% Cold recovery 3% Hot creep 22% Hot recovery 2% Density (g/cm3) 1.62.0 Gas permeability (mL/min)
We offer Non Asbestos Gaskets which are gaining significance due to the known hazards of asbestos made products. We offer a wide range of proven Compressed Non Asbestos Gaskets with high fluid media in addition to a few special applications. Our Non Asbestos Gaskets have high strength and durability. These Compressed Non Asbestos Gaskets remain in use even when exposed to very high temperature. Features : Thickness : 0.25 mm to 6mm High strength Excellent durability Can withstand up to 450oC temperature Incomparable chemical and steam resistance
Non-asbestos Gasketing Sheet is applied to the automobile,agricultural machinery,motorcycle,engineering machinery etc..the medium is the lubricating oil,the spacer material under150centigrade of suitable temperature. Whatsapp:86-13566083951 Standard Size:1000mmx1000mm,1000x1200mm,1000x500mm Thickness:0.5~2.0mm Color:Black,Grey,Green
Compressed non-asbestos fibre(CNAF) gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF). Compressed non-asbestos fibre(CNAF) sheet, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.5Mtr(Width) x 1.5Mtr(Length) 1.5Mtr(Length) x 1.5Mtr(Width) x 50cm(Height) Gross weight @ 200kgs
We can provide all kinds asbestos gasket sheet and non asbestos gasket sheet with good price. Thickness: 0.3 to 6mm 4500 x 1500mm, 4100 x 1500 mm, 3850 x 1300 mm, 3810 x 2700 mm 1500 x 2000 mm, 1500 x 1500 mm , 1500 x 1350 mm, 1500 x 1000 mm, 1270 x 1270 mm, The other size is optional or according to the requirements of customers. Packing: in roll or in wooden pallet of about 1000 kgs, 2000kgs net each.
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Metallic Gaskets: \"Metallic Gaskets\" are gaskets that are fabricated from one or a combination of metals to the desired shape and size. Common metallic gaskets are Spiral Wound Gaskets, Double Jacketed Metal Gaskets, Solid Metal Gaskets, Corrugated Metal Gaskets, Ring Type Joint Gasket used for heat exchangers, compressors, condensers, pumps, valves and turbines. These metallic gaskets are suitable for high pressure & temperature applications and require high bolt load to seal. Types: � Spiral Wound, Double Jacketed, Solid Metal gaskets, Corrugated Metal Jacketed Gaskets, Ring type joint Gaskets Non Metallic Gaskets: \"Non Metallic Gaskets\" or \"Soft Gaskets\" are gaskets that are easily compressed under a low bolt load. They are composite sheet materials that are suitable for a wide range of general as well as corrosive chemical applications. They are easily available either in sheet form or as gaskets that are cut accurately to any reasonable shape and size. Non metallic gaskets are usually manufactured from materials like arimid fiber, glass fiber, elastomers, teflon (PTFE), compressed asbestos fibre (CAF), flexible graphite etc. Types are: Non Asbestos, Asbestos, Flexible Graphite, PTFE, Viton, Silicone Rubber, Neoprene and Flange Gaskets.
Non-asbestos joint sheet At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework. 1volume/polybag
Our range of Compressed Asbestos Gaskets is widely demanded in the market because of its outsatnding quality. Compressed Asbestos Fibre (CAF) Gaskets are manufactured from carefully selected chrysotile fibres, intimately blended with suitable heat resisting binders and fillers and vulcanized into sheets of homogenous compositions and uniform thickness. To avoid the necessity of producing perfect finish on the contact faces of a mechanical assembly, which is not only costly but quite often impracticable, a gasket of compressed asbestos fibre jointing enables a tight seal to be created and maintained between separable members. The seal is effected by the yielding, or the flow of the jointing material into the imperfections of the joint contact faces. In this way the gasket provides an unbroken barrier of homogenous structure through which no pathways exist for escape of the confined media. Features : Thickness : 0.25 mm to 6 mm
ASBESTOS GASKET IDEAL INSULATING AND CORROSION RESISTANT MATERIAL Asbestos Gasket is inexpensive, readily available and stable. It is fireproof and can withstand extreme heat making it the ideal thermal isolation material. As well, asbestos gaskets are non-corrosive, impervious to chemical reactions and non-conductive of electricity. It is widely used in exhaust systems, turbo chargers and cylinder. TYPES White fibrous chrysotile asbestos on a black background Chrysotile asbestos Grey acicular fiber amphibole asbestos on a black background Amphibole asbestos COMMON SPECIFICATIONS Thickness (mm) 0.46.0 Plate sizes (mm) 1000 1500, 1270 1270, 1270 1300, 1270 3810, 1300 1300, 1350 1350, 1350 1500, 1360 1500, 1500 1500, 1500 2000, 1500 3000, 1500 4000, 1500 4100, 1500 4500, 2000 3000 Maximum continuous working temperature 200 °C Steam max continuous working temperature 120 °C Maximum operating pressure 70 bar Maximum pressure (MPa) 1.5 Tensile strength (MPa) 6 Compressibility 12 ± 5 % Density (g/cm3) 1.62.0 Color red, green, blue, yellow, black, gray and more ple in.
