Asbestos Gasket

Non-asbestos Gasket Good Alternative To Compressed Asbestos Gasket Non-Asbestos Gasket is a general-purpose sheet material reinforced with high-grade asbestos-free fibers and bonded with heat-resistant nitrile rubber. It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket. The gasket is suitable for engineering, automobile, chemical, oil & gas, petrochemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off. COMMON SPECIFICATIONS Thickness (mm) 0.46.0 Available size (m) 1.5 1.6, 1.5 2, 1.5 3, 1.5 4, 1.5 6 Maximum continuous working temperature 650 °F Steam max continuous working temperature -100 °F Maximum pressure 85 bar Tensile strength (MPa) 13 Residual stress (MPa) > 22 Compressibility 6% Cold compressibility 8% Cold recovery 3% Hot creep 22% Hot recovery 2% Density (g/cm3) 1.62.0 Gas permeability (mL/min)

We offer Non Asbestos Gaskets which are gaining significance due to the known hazards of asbestos made products. We offer a wide range of proven Compressed Non Asbestos Gaskets with high fluid media in addition to a few special applications. Our Non Asbestos Gaskets have high strength and durability. These Compressed Non Asbestos Gaskets remain in use even when exposed to very high temperature. Features : Thickness : 0.25 mm to 6mm High strength Excellent durability Can withstand up to 450oC temperature Incomparable chemical and steam resistance

1)Country of origin: Germany 2)Material: is an asbestos-free gasket material. It consists of aramide fibers, inorganic fillers and other asbestos substitutes that are resistant to high temperatures. 3)Application: for DIN and ANSI flanged joints, apparatus, pumps, fittings and pipelines in industrial plants ; for fittings with very narrow sealing surfaces, e.g. in gas and hot water units, solar panels, convection radiators and couplings, etc. ;for sealed joints in IC engines subject to high mechanical and thermal stress (oil filters, intake manifolds, water, fuel & vacuum pumps, etc.for transmissions, gearboxes, refrigerating & air compressors, etc. ;Since AFM 34 is physiologically safe, it is particularly suitable for use in contact with drinking water & foodstuffs, and for sealing highly pure, pollutant-sensitive products such as paint bases, vitamins, etc. 4)It can be made to specific gasket according to drawing, dimensions supplied, or other arrangement.

Non-asbestos joint sheet At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework. 1volume/polybag

Non-asbestos Gasketing Sheet is applied to the automobile,agricultural machinery,motorcycle,engineering machinery etc..the medium is the lubricating oil,the spacer material under150centigrade of suitable temperature. Whatsapp:86-13566083951 Standard Size:1000mmx1000mm,1000x1200mm,1000x500mm Thickness:0.5~2.0mm Color:Black,Grey,Green

Compressed non-asbestos fibre(CNAF) gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF). Compressed non-asbestos fibre(CNAF) sheet, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.5Mtr(Width) x 1.5Mtr(Length) 1.5Mtr(Length) x 1.5Mtr(Width) x 50cm(Height) Gross weight @ 200kgs

Our range of Compressed Asbestos Gaskets is widely demanded in the market because of its outsatnding quality. Compressed Asbestos Fibre (CAF) Gaskets are manufactured from carefully selected chrysotile fibres, intimately blended with suitable heat resisting binders and fillers and vulcanized into sheets of homogenous compositions and uniform thickness. To avoid the necessity of producing perfect finish on the contact faces of a mechanical assembly, which is not only costly but quite often impracticable, a gasket of compressed asbestos fibre jointing enables a tight seal to be created and maintained between separable members. The seal is effected by the yielding, or the flow of the jointing material into the imperfections of the joint contact faces. In this way the gasket provides an unbroken barrier of homogenous structure through which no pathways exist for escape of the confined media. Features : Thickness : 0.25 mm to 6 mm

Designation of product in-plant standard q/hxm01-2005 Colors: gray. Description: made from asbestos and oil-resistance rubber. Application: suitable for sealing gasket materials for motorcycle engines or other parts. Physical properties: Tensile strength, mpa 15 Density, g/cm3 1.6 2.0 Compressibility, %125 Recovery, % 50 The item above is supplied in sheets 150 1350mm, 1270 1270mm, 127 3810mm or 1500 2000mm and in thickness 0.5mm-4.0mm.

Supplier: Spiral wound gasket, asbestos, rubber sheet, graphite, PTFE, gland packing