Compressed non-asbestos fibre(CNAF) gaskets, 1.5mm/2.0mm/3.0mm thickness, cut in accordance to ASME B16.21 to suit with ANSI B16.5 flanges, raised face(RF)/full face(FF).
Compressed non-asbestos fibre(CNAF) sheet, 1.5mm/2.0mm/3.0mm thickness, dimension as 1.5Mtr(Width) x 1.5Mtr(Length)
1.5Mtr(Length) x 1.5Mtr(Width) x 50cm(Height)
Gross weight @ 200kgs
Gaskets
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Metallic Gaskets: \"Metallic Gaskets\" are gaskets that are fabricated from one or a combination of metals to the desired shape and size. Common metallic gaskets are Spiral Wound Gaskets, Double Jacketed Metal Gaskets, Solid Metal Gaskets, Corrugated Metal Gaskets, Ring Type Joint Gasket used for heat exchangers, compressors, condensers, pumps, valves and turbines. These metallic gaskets are suitable for high pressure & temperature applications and require high bolt load to seal. Types: � Spiral Wound, Double Jacketed, Solid Metal gaskets, Corrugated Metal Jacketed Gaskets, Ring type joint Gaskets Non Metallic Gaskets: \"Non Metallic Gaskets\" or \"Soft Gaskets\" are gaskets that are easily compressed under a low bolt load. They are composite sheet materials that are suitable for a wide range of general as well as corrosive chemical applications. They are easily available either in sheet form or as gaskets that are cut accurately to any reasonable shape and size. Non metallic gaskets are usually manufactured from materials like arimid fiber, glass fiber, elastomers, teflon (PTFE), compressed asbestos fibre (CAF), flexible graphite etc. Types are: Non Asbestos, Asbestos, Flexible Graphite, PTFE, Viton, Silicone Rubber, Neoprene and Flange Gaskets.
Our range of Compressed Asbestos Gaskets is widely demanded in the market because of its outsatnding quality. Compressed Asbestos Fibre (CAF) Gaskets are manufactured from carefully selected chrysotile fibres, intimately blended with suitable heat resisting binders and fillers and vulcanized into sheets of homogenous compositions and uniform thickness. To avoid the necessity of producing perfect finish on the contact faces of a mechanical assembly, which is not only costly but quite often impracticable, a gasket of compressed asbestos fibre jointing enables a tight seal to be created and maintained between separable members. The seal is effected by the yielding, or the flow of the jointing material into the imperfections of the joint contact faces. In this way the gasket provides an unbroken barrier of homogenous structure through which no pathways exist for escape of the confined media. Features : Thickness : 0.25 mm to 6 mm
EPDM Rubber Gasket for Aluminum System All kinds of shape, form All Black color
Non-asbestos joint sheet At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework. 1volume/polybag
Supplier: Engineering goods like machined, forged, stamped, casting, aluminum casting, aluminum extrusion, fasteners, springs, washers, gaskets, oil seals, rubber components, etc
Types of PTFE Gaskets: Expanded PTFE PTFE Envelope with Compressed Fibre Insert Non-asbestos Gaskets Specifications : Remarkable chemical resistance Suitable for use with foodstuff and pharmaceutical applications Insoluble in solvents, even at increased temperature Stable to light Does not absorb water Excellent electrical insulating capacity Low thermal conductivity
Non-asbestos Gasket Good Alternative To Compressed Asbestos Gasket Non-Asbestos Gasket is a general-purpose sheet material reinforced with high-grade asbestos-free fibers and bonded with heat-resistant nitrile rubber. It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket. The gasket is suitable for engineering, automobile, chemical, oil & gas, petrochemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off. COMMON SPECIFICATIONS Thickness (mm) 0.46.0 Available size (m) 1.5 1.6, 1.5 2, 1.5 3, 1.5 4, 1.5 6 Maximum continuous working temperature 650 °F Steam max continuous working temperature -100 °F Maximum pressure 85 bar Tensile strength (MPa) 13 Residual stress (MPa) > 22 Compressibility 6% Cold compressibility 8% Cold recovery 3% Hot creep 22% Hot recovery 2% Density (g/cm3) 1.62.0 Gas permeability (mL/min)
Manufactured from fiber, with oil-resistant rubber filler and compressed into sheets, these materials are suitable for use as an oil-resistant jointing medium for heat installations and engine sealing. This item is suitable for Services: Flange Gaskets Seals. Pipeline seals, Valve seals, Water, saturated steam, mild chemicals, refrigerants, oils, fuels, Gasoline etc.. Standard Size:1270mm x1270mm,1500x2000mm,1500x4000mm,1500x1500mm Thickness:0.4mm~6.4mm Whatsapp:86-13566083951 Color:White,Blue,Green,Black,Gray etc.. Style: IG-005-01 Low Pressure Compressed Non-asbestos Sheet IG-005-02 Middle Pressure Compressed Non-asbestos Sheet IG-005-03 High Pressure Compressed Non-asbestos Sheet IG-005-04 Oil-resistance Compressed Non-asbestos Sheet IG-005-05 Compressed Non-asbestos Sheet with SS304 wire insert IG-005-06 Reinforced Compressed Non-asbestos Sheet with Carbon Steel Tanged
