Gigabit Poe Injector Suppliers and Manufacturers

Industrial Gigabit PoE Injector (midspan) DC INPUT/ DIN RAIL MOUNT Data Rate: 10M/100M/1000M Input Voltage: 12VDC to 57VDC (DIN-POE4); 40VDC to 57VDC (DIN-POE4D) Maximum PoE output: 35W per port (DIN-POE4D); Current limited 1A/port (DIN-POE4) Compliance: 802.3af/at (DIN-POE4D) PoE protection over-current protection LEDs: Green-Power ready, Off-No power apply Operating temperature: -40~ +75 Storage temperature: -40~+85Operation humidity: 90% relative humidity, non-condensing Dimension: 125mm(H) x46mm(W) x102mm(D) DIN RAIL Mountable Operating Voltage: Data 5V Clamping Voltage: Data 16.5V(@IPP -5A, tp -8/20µs, I/O pin to GNDµ Peak Pulse Current: 20A (tp-8/20µs) Pin Protected: All 8 pin protected Max Shut Capacitance:

Passive PoE Injector 24VDC 1A 24W PoE adapter 100Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output: 48Vdc 1.25A 60W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:10/100/1000Mbps Gigabit *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 86% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black

Gigabit Passive PoE Injector 48VDC 0.5A 24W PoE adapter 1000Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output:48VDC 0.5A 24W *. AC socket: US plug, 2 pins plug *.Ethernet rate: 10/100/1000Mbps gigabit *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 84% Min *.Ripple & Noise:4800mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black

FEATURES +/- 48V DC input; 24V Passive PoE output Provide power and access to device at the same time Power-in/Power-out LED display Easy-Positioning design, simple installation for vertical or horizontal direction Dual (DC-in/battery) input power redundancy OVERVIEW PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.

This 24 Ports 10/100/1000M POE Injector also are called Power over Ethernet midspans devices, the 24 Ports 1000M PoE Injectorare based on the existing network interface and embed PoE function. This midspans have 24x2 Standard RJ45 network ports, onegroup of network ports are used for uplinking ethernet switches or other network devices, the other group of network ports support POE power+data output.PoE Injector provides a simple, economic, high-performance, intelligent Ethernet power supply and data communication solution.Simple to use, easy installation, superior performance, cost-effective. It is an ideal choice for customers to improve the quality of the project. Main Feature: Supply power to wireless access points and surveillance cameras over cat-5 cabling. 24 -Port 10/100/1000Mbps Data input 24 -Port 10/100/1000Mbps Data + Power output industrial MeanWell power supply built in passive 24v POE 4/5+,7/8- Remote power feeding up to 100 meters 1U rack design, suitable for cabinet-mounted Scalable Solution The 24 Ports 1000M POE Injector support up to twenty four Ethernet terminals. Multiple midspans can be mounted in a wiring closet to support additional terminals, providing a simple, cost effective method for expanding the network. Easy to Use The 24 Ports 10/1000M POE Injector are plug-and-play products. Once turned on, they automatically detect all Power over Ethernet terminals and supply inline power.

FEATURES Compliant with IEEE802.3bt 90W output power on 4-pairs Data Rate: 10/100/1000Mbps Full protection for OCP, OLP, and OVP LED indication for power and POE status 2-Pair PDs received power on 2-Pairs Automatic Detection and Protection of Non standard Ethernet Terminals

Description: ,  dc 36v~72v input, 35w/56v ouput, 802.3at Application:  industrial pc ,   Transportation ,   Security cam Any gigabit ethernet terminals which work with industrial dc input system Any gigabit ethernet terminals which require power under 30w Plastic case material: pc Plastic case finish: texture Plastic case color: gray Plastic case dimension: 125 x 75 x 38 (l x w x h) mm Numbers of unit in one carton: 50pcs Carton weight: n.W.15kgs/g.W.16kgs Carton dimension: 1.3 cuft. White box dimension: 165 x 82.5 x 44 (l x w x h) mm

Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.

Single-port Ethernet power supply equipment, which is suitable for indoor use, can work normally from 100VAC to 240VAC input voltage. The power supply and network terminal equipment are connected by over five types of cables. It has an Ethernet data port and an output port after data and power combination. This device can provide POE power supply applications in line with IEEE802.3af/at international standards for all Ethernet devices, such as routers, switches, wireless AP, network telephones, industrial network terminals, network cameras, etc. It can also provide efficient engineering in places where power supply cannot be provided remotely or where power supply by Ethernet network lines can be used to improve system reliability and simplify equipment installation.

PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case. PoE Injector for information kiosks After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates.  High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. PoE Injector for POS For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. We are PoE supplier PoE Injector for information kiosks Specifications Parameter Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-E Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48 Vdc DC Input Current: 8.0A

PoE Injector for door locks PT-PSE105GBS-D is a single port fiber PoE Media converter with 4 Pair PoE up to 90 watts of power with 6Kv surge protection PoE Injector for displays Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Injector for information kiosks Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. It is suitable for special scenarios, like highway side, exurb, etc. PoE Injector for IoT application Specifications Parameter high quality PoE Injector Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-D Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block   *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 50-57Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 50-57Vdc     Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV  Differential mode surge protection (10/700us): 1.5KV  AC Surge Protection Line-Earth 1.2/50us (8/20us):2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*1, SFP slot*1 Size:144.5 X 96 X 35.4mm Weight: 485gï¼?1.1lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green SFP fiber indicator: Green PoE data indicator: Yellow Warranty 2 year

Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports   condition LAN Port*1, DC Input   Port*1, PoE Output Port*1 Regulatory   Compliance     IEEE802.3bt     RoHS Compliance     WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin   Assignment and Polarity:     4/5 (+), 7/8 () and 3/6 (+), 1/2 ()     Output Power Voltage: 55Vdc     User Port Power: 60W Guaranteen Input DC   Input Voltage: 36 to 72 Vdc     DC Input Current: 2.5A Working   Environment Operating   Temperature: 0 to 40     Operating Humidity: 20% to 80%, non-condensation     Storage Temperature: -20 to 70     Storage Humidity: 10% to 90%, non-condensation     Operating Altitude: up to 5000meters PoE Surge   Protection Protected   line: 1,2,3,4,5,6,7,8     Common mode surge protection(10/700us): 6KV      Differential mode surge protection (10/700us): 1.5KV      Line-Earth 1.2/50us (8/20us): 6KV     Line-Line 1.2/50us (8/20us): 4KV AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV     Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case:   Plastic     Color: Black     Mounting: Wall-mounted     IP Rated: IP40     Connectors: Shielded RJ-45*2     Size: 193mmX 85mmX 41mm      Weight: 380gï¼?13.4ozï¼? LED Indicator Power   Indicator : Green     PoE Load Indicator :  Green   @â?¤30W                                          Blue      @ï¼?30Wâ?¤60W Warranty 2 year Safety   Approvals CE/FCC

PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV  Differential mode surge protection (10/700us): 1.5KV  Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm  Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year

24W, 48V/24V output power Data rate: 10/100Mbps Full protection for OCP, OLP and OVP LED indication for power and POE status

Port 30w per port 19" poe midspan injector • ieee802.3at detection • full power 250w: 30w per port • full protection otp, ocp, ovp • 1, 4, 8, 16, 24 ports optional Security cctv camera 1pcs/box

Description: 8GE POE+2SFP. Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab. Comply to POE IEEE 802.3af/at standard, all ports standard testing. Support POE IPC camera, POE WIFI AP, and POE IPPHONE. Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure. Auto MDI/MDIX. Upstream port lightning protection. MAX 30W, MAX power 120W. Store-and-forward. All ports support wire speed switch, jumbo frame transmission. Zero QFD, self-adaption. Panel lights can monitor operative mode and malfunction analysis. Specifications: Electric Port 1000M POE 8 SFP 2 Function Exchange Mechanism Store-and-forward Exchange Capacity 16G MAC 4K Environmental Working Temperature:0?~40? Storage temperature :-40?~70? Working Humidity :10%~90% RH non-condensing Storage Humidity:5%~90% RH non-condensing POE IEEE802.3af/at, MAX 30W, MAX power 120W power DC52V 2.5A AC 110~220V 50/60HZ Network protocol IEEE 802.3X IEEE 802.3i 10BASE-T X IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T G IEEE 802.3z 1000BASE-X G IEEE 802.3af /IEEE 802.3at IEEE 802.3x Flow control Default Mode Common switch Match VLAN isolation Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex Network Media 10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(=100m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(=100m) 1000Base-T: Pair 4 Category 5 (cat 5e)and above UTP/STP(=100m) 1000Base-SX:62.5µm/50µm MMF(2m~550m) 1000Base-LX:62.5µm/50µm MM(2m~550m) or 10µm SMF(2m~5000m) Physical Specifications Product Size:225mm*105mm*32mm(L*W*H) package Size:300mm*175mm*100mm(L*W*H)

Industrial poe injector Pt-pse106gro wide-temperature midspan 30w Standard 1) 55vdc, 30w output power 2) passed cttl signal and poe 6kv (10/700us) testing 3) temperature -40?-65? 1. Single-port 30w midspan Pt-pse106gro is a single-port solution for remote powering of current as well as emerging high power applications. It outputs 55vdc/550ma, 30watts. 2. Wide-temperature design Pt-pse106gro work temperature -40?-65? for industrial environment or high temperature environment. 3. Lightning protection Provide 8 lines power & signal 6kv(10/700us) lightning-protection for pd escape from lightning strikes. 4. Easy install Pt-pse106gro with good adaptability to the temperature, there are four mounting holes to fixed to the wall by self-tapping screw or tied to shelf. 1. Input voltage: 100vac~240vac, 50hz~60hz 2. Output max power: 30w 3. Output current: 550ma 4. Data speed: 10/100/1000mbps 5. Output voltage regulation precision: 55vdc±5% 6. Loading: 55vdc±1% 7. Working temperature range: -40?~+65? 8. Size & weight Size: 193mm*85mm*41mm Weight: 380g Standard - ieee802.3 10base-t ethernet - ieee802.3u 100base-tx fast ethernet - ieee802.3ab 1000base-t gigabit ethernet - support for ieee802.3af/at pd - rohs compliant - weee compliant, ce/fcc - fcc part 15, class b - en 55022 class b - mtbf: 100, 000 h.@25? Poe power output - ethernet pin: 4/5(+), 7/8(-) - data speed: 10/100/1000mbps - output voltage: 55v - output current: 550ma - input ac voltage: 100-240vac - input ac current: 1.0a@100-240vac - ac hz: 50-60hz Size & weight - size: 193mm*85mm*41mm - weight: 380g

1. With 4x10/100/1000BaseT(X) PoE ports, and 1x1000BaseX SFP slot 2. Up to 30 watts output of each PoE port 3. Smart PoE over current and short circuit protection 4. Intelligent power consumption detection and classification 5. Redundant dual 48 VDC power inputs, Built-in over-current protection, Reverse connection protection 6. -40 to 75C operating temperature range (WT models) 7. No fan, low consumption, industrial design standard, industrial grade electronic components, environmental protection & lead-free production 8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting 9. IP Rating up to IP40 10. No packet lost in 72 hours full load traffic testing