Key Features: 9-port 10/100M base-TX ethernet switch with 8 POE+ Fixed Vlan mode and normal Mode Can be shifted by one key Loop detection Led indicates the Loop State each port is fully ieee802.3af/at standard compilant up to 30watts POE+
This 24 Ports 10/100/1000M POE Injector also are called Power over Ethernet midspans devices, the 24 Ports 1000M PoE Injectorare based on the existing network interface and embed PoE function. This midspans have 24x2 Standard RJ45 network ports, onegroup of network ports are used for uplinking ethernet switches or other network devices, the other group of network ports support POE power+data output.PoE Injector provides a simple, economic, high-performance, intelligent Ethernet power supply and data communication solution.Simple to use, easy installation, superior performance, cost-effective. It is an ideal choice for customers to improve the quality of the project. Main Feature: Supply power to wireless access points and surveillance cameras over cat-5 cabling. 24 -Port 10/100/1000Mbps Data input 24 -Port 10/100/1000Mbps Data + Power output industrial MeanWell power supply built in passive 24v POE 4/5+,7/8- Remote power feeding up to 100 meters 1U rack design, suitable for cabinet-mounted Scalable Solution The 24 Ports 1000M POE Injector support up to twenty four Ethernet terminals. Multiple midspans can be mounted in a wiring closet to support additional terminals, providing a simple, cost effective method for expanding the network. Easy to Use The 24 Ports 10/1000M POE Injector are plug-and-play products. Once turned on, they automatically detect all Power over Ethernet terminals and supply inline power.
Gigabit 8 SFP2 Ethernet Media Converter Feature * Commonly used in network series or cascade occasions, with 1000M optical port and the second line on the joint optical port * Card type or independent structure for centralized management 2U Aluminum rack * Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward * Often cache size is 512KB, address table size is 4KB * Ethernet 10Base-T or 100Base-TX to 100Base-FX fiber media converter * Support IEEE 802.3U, IEEE 802.3X, IEEE 802.1d protocol * Supports full-duplex flow control or half-duplex backpressure flow control work, and with auto-negotiation (Auto Negotiation) capacity * Electrical ports support 100Mbps, 10Mbps, electrical interface can be used at both ends do not match the same rate (when full duplex wire-speed bandwidth 2XMbps) * Missing link to provide remote diagnostics, electrical and optical interface port link diagnostic link connection, dynamic data transmission, full / half duplex, speed indicato * Provides dual RJ-45 electrical ports support automatic cross-connect switches, hubs * Optical interface characteristics, compatibility, high reliability Application Environment Urban Intelligent Traffic Monitoring System (ITS), Safe City Highway monitoring system, electronic road monitoring, network cameras Large industrial enterprise security monitoring system, network multifunction system Remote multimedia teaching / campus monitoring, remote network video conference system Technical Specification Product Name 10/100/1000M 8-Port SFP Media Converter Model ES1000-2G-8F Description 1000M 8-Port SFP Media Converter Media Converter Ports 2 10/100/1000Mbps copper RJ45 Port + 8 10/100/1000Mbps SFP Port Transmision Distance 20Km Optical Fiber Multi-level series type, LC, 1310nm/1550nm Fiber Bandwidth 1.25G,10G Ethernet Bandwidth 1000MHz Network Media 100BASE-TX/1000BASE-TX:super cat.5 UTP Cable Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI Forward Mode Store and Forward Environment Operating Temperature: -20 ~ 55 C Operating Temperature: -20 ~ 55 ° C Operating Humidity: 5%~9%,non-condensing EMI Compatiblity FCC Class A, CE Power DC 5V3A Demension 200mm*127mm*30mm Warranty 2 year warranty
***LNP-0800-T/ 8-Port Industrial PoE+ Unmanaged Ethernet Switch, w/8*10/100Tx (30W/Port); EOT: -40~75C***| Network broadcast storm protection | 8-Port IEEE 802.3at compliant PoE+ Function with 30W/Port | Supports Auto MDI/MDI-X Function | Store-and-Forward Switching Architecture | 2K MAC Address Table | Surge Protection: 2,000 VDC support | ESD Protection: 6,000 VDC support | Redundant Power Input Design – 48~55VDC | Built-in 1 relay output for Port Break Alarm | IP30 Rugged Aluminum Case Design | DIN-Rail and Wall Mount support | Operating Temperature range - STD: -10° to 70° C, EOT: -40° to 75° C | 5-Year Warranty |
Universal Ceramic Honeycomb Catalytic Converter For Sale Catalytic converter is a device used to reduce the toxicity of emissions from an internal combustion engine.
POE1602SFP-3 is applied to POE IPC camera, POE WIFI AP, and POE IPPHONE, and easy for network transmission. This device comes with SFP port, easy for optical fiber remote transmission. Main Features 16GE POE+2SFP, with different modules, can up to 100KM. Comply to IEEE 802.3?IEEE 802.3u?IEEE 802.3ab?802.3X?802.3z. 500M CPU, 52G bus Comply to POE IEEE 802.3af/at standard, all ports standard testing. Support POE IPC camera, POE WIFI AP, and POE IPPHONE. Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure. Auto MDI/MDIX. Upstream port lightning protection. MAX 30W, MAX power 300W. Store-and-forward. All ports support wire speed switch, jumbo frame transmission. Zero QFD, self-adaption. Panel lights can monitor operative mode and malfunction analysis. Specifications: Electric Port 1000M POE 16 SFP 2 Function Exchange Mechanism Store-and-forward Exchange Capacity 52G MAC 8K POE IEEE802.3af/at, MAX 30W, MAX power 300W power AC110-265V 50/60HZ 2.5A Network protocol IEEE 802.3X IEEE 802.3i 10BASE-T X IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T G IEEE 802.3z 1000BASE-X G IEEE 802.3af /IEEE 802.3at IEEE 802.3x Flow control IEEE 802.1q VLAN Bridge operation Default Mode Common switch Match VLAN isolation Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex Network Media 10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(=100m) 100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(=100m) 1000Base-T: Pair 4 Category 5(Cat5e) and above UTP/STP(=100m) 1000Base-SX:62.5µm/50µm MMF(2m~550m) 1000Base-LX:62.5µm/50µm MM(2m~550m) or 10µm SMF(2m~5000m) Physical Specifications Product Size:440mm*290mm*45mm(L*W*H) package Size:497mm*393mm*97mm(L*W*H) 4.4Kg
LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras. It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. Standard Packaging: Carton packaging(Support customer Logo)
Network Switch
S1005E-P 5 RJ-45 10/100M ports POE switch with power adapter Product Description: The S1005E-P is a 5 ports Power-over-Ethernet (POE) switch which is designed by Hi-Net Technology Company. It provides 5 10/100Mbps Auto-Negotiation RJ45 ports and 4 ports with POE function (Port 2-5). The POE ports can automatically detect and supply power for the IEEE802.3af/at compliant Powered Devices (PDs), like Voip Phone, PoE APs, IP Phones, IP cameras, etc. The S1005E-P is a small size metal-shell device which is useful for the small office, home and the IP solution project using. All POE ports support both IEEE802.3af and IEEE802.3at Standard; each port can output 30W max. Three optional power supplies for your choice (65W, 96W, 135W, can choose from the order list). Extend Function: Port Lightning protection, Power lightning protection, solid vlan. Products Features: â?¢ IEEE802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE802.3af, IEEE802.3at â?¢ Provides 5 10/100Base-TX ports â?¢ 4 POE Ports (Ports 2-5), Each POE port output 30W max power â?¢ High back-plane bandwidth 1Gbps â?¢ Reliable Power Adapter supply power for both network switch and POE â?¢ Three optional power adapters: 65W, 96W, 135W â?¢ 1K entry MAC address table of the PoE switch with auto-learning and auto-aging â?¢ IEEE802.3x Flow control for Full-duplex Mode and backpressure for Half-duplex Mode â?¢ Surge protection for power port and data ports â?¢ Supports PoE IEEE 802.3af or IEEE802.3at compliant Powered Device (PD) â?¢ Compact metal case for desktop or wall-mounting. â?¢ EMI standards complies with FCC, CE class B â?¢ Extend Function: Port Lightning protection, Power lightning protection, solid vlan. Products Specifications: Item Description Summarize Fixed port 5 10/100Mbps RJ45 port POE Port 4 PoE ports (Port 2-5) LED Indicators PWR, PoE, Link/Act LED. Input voltage 100Vï½?240V ACï¼?50/60Hz (for power adapter) 48VDC (for switch) Network Media 10BASE-TX: UTP category 5, 5e cable (â?¤250m) 100BASE-TX: UTP category 5, 5e cable (â?¤150m) Forwarding Rate 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port Power Supplies 65W,96W,135W Optional Operating temperature 0â??ï½?40â??. Storage temperature -10â??ï½?70â??. Relative humidity 20%ï½?85% (non-condensing). Thermal methods Fanless Switching capacity 1G. MAC address table 1K. Traffic control IEEE 802.3x full-duplex flow control. Package Size 19.1*14.1*6.4cm Weight
