PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case. PoE Injector for information kiosks After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates. High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. PoE Injector for POS For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. We are PoE supplier PoE Injector for information kiosks Specifications Parameter Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-E Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48 Vdc DC Input Current: 8.0A
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 36 to 72 Vdc DC Input Current: 2.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 380gï¼?13.4ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals CE/FCC
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year
Industrial poe injector Pt-pse106gro wide-temperature midspan 30w Standard 1) 55vdc, 30w output power 2) passed cttl signal and poe 6kv (10/700us) testing 3) temperature -40?-65? 1. Single-port 30w midspan Pt-pse106gro is a single-port solution for remote powering of current as well as emerging high power applications. It outputs 55vdc/550ma, 30watts. 2. Wide-temperature design Pt-pse106gro work temperature -40?-65? for industrial environment or high temperature environment. 3. Lightning protection Provide 8 lines power & signal 6kv(10/700us) lightning-protection for pd escape from lightning strikes. 4. Easy install Pt-pse106gro with good adaptability to the temperature, there are four mounting holes to fixed to the wall by self-tapping screw or tied to shelf. 1. Input voltage: 100vac~240vac, 50hz~60hz 2. Output max power: 30w 3. Output current: 550ma 4. Data speed: 10/100/1000mbps 5. Output voltage regulation precision: 55vdc±5% 6. Loading: 55vdc±1% 7. Working temperature range: -40?~+65? 8. Size & weight Size: 193mm*85mm*41mm Weight: 380g Standard - ieee802.3 10base-t ethernet - ieee802.3u 100base-tx fast ethernet - ieee802.3ab 1000base-t gigabit ethernet - support for ieee802.3af/at pd - rohs compliant - weee compliant, ce/fcc - fcc part 15, class b - en 55022 class b - mtbf: 100, 000 h.@25? Poe power output - ethernet pin: 4/5(+), 7/8(-) - data speed: 10/100/1000mbps - output voltage: 55v - output current: 550ma - input ac voltage: 100-240vac - input ac current: 1.0a@100-240vac - ac hz: 50-60hz Size & weight - size: 193mm*85mm*41mm - weight: 380g
FEATURES +/- 48V DC input; 24V Passive PoE output Provide power and access to device at the same time Power-in/Power-out LED display Easy-Positioning design, simple installation for vertical or horizontal direction Dual (DC-in/battery) input power redundancy OVERVIEW PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.
FEATURES Compliant with IEEE802.3bt 90W output power on 4-pairs Data Rate: 10/100/1000Mbps Full protection for OCP, OLP, and OVP LED indication for power and POE status 2-Pair PDs received power on 2-Pairs Automatic Detection and Protection of Non standard Ethernet Terminals
Application: IP Telephones, Wireless Network Access Points, Blue Tooth Access Point IP Print Servers, Security Camera, etc. Item: 48V 2A PoE Injector Input Rated Voltage : 100Vac~240Vac Input Frequency Range: 47Hz~63Hz Input Inrush Current: 1.3A max Efficiency: 87%(MIN)at Rated Voltage, level VI Ripple and Noise:
PT-PSE100GFN is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32 amp. PoE Injector manufacturer:Creative Lianjie Network Technology Designed for the AT powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at devices. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter PoE Injector for door locks Description Key Features 1. Output: 48Vdc, 320mA, 15.4W 2. Transmission Rate: 10/100/1000Mbps 3. Power Pin: 4/5(+),7/8(-) Part Number PT-PSE100GFN Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power: 30W Guaranteen Input Input Voltage: 100-240Vac Frequency: 50/60Hz Typ Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: plastic Color: Black Mounting:Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 135mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE, FCC
PT-PSE100G-24 is a single port midspan Injector with 2 Pair PoE up to 26 watts of power at 24 VDC at 1100 amp. Designed for the outdoor PoE Injector, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 0/100/1000Mbps of data rates. Fully comply with IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with wall-mounted. It operates with a wide input voltage of 100-240 VAC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). The POE Injector are Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. We are PoE Injector supplier and more information you can view here We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. high quality PoE Injector Specifications Parameter Description Key Features 24VDC output voltage Wall-mounted Part Number PT-PSE100G-24 Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 24Vdc User Port Power: 26W Guaranteen Input AC Input Voltage: 100 to 240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) DC Input Current: 1A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 134mmX 56mmX 33mm Weight: 150gï¼?5.3ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green Warranty 2 year Safety Approvals CE/FCC
