Gigabit Passive Poe Injector 48Vdc 24W

Passive PoE Injector 24VDC 1A 24W PoE adapter 100Mbps Ethernet switch antennae networking AP CCTV camera *. Input:100-240VAC 50/60Hz *. Output: 48Vdc 1.25A 60W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:10/100/1000Mbps Gigabit *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 86% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black

This 24 Ports 10/100/1000M POE Injector also are called Power over Ethernet midspans devices, the 24 Ports 1000M PoE Injectorare based on the existing network interface and embed PoE function. This midspans have 24x2 Standard RJ45 network ports, onegroup of network ports are used for uplinking ethernet switches or other network devices, the other group of network ports support POE power+data output.PoE Injector provides a simple, economic, high-performance, intelligent Ethernet power supply and data communication solution.Simple to use, easy installation, superior performance, cost-effective. It is an ideal choice for customers to improve the quality of the project. Main Feature: Supply power to wireless access points and surveillance cameras over cat-5 cabling. 24 -Port 10/100/1000Mbps Data input 24 -Port 10/100/1000Mbps Data + Power output industrial MeanWell power supply built in passive 24v POE 4/5+,7/8- Remote power feeding up to 100 meters 1U rack design, suitable for cabinet-mounted Scalable Solution The 24 Ports 1000M POE Injector support up to twenty four Ethernet terminals. Multiple midspans can be mounted in a wiring closet to support additional terminals, providing a simple, cost effective method for expanding the network. Easy to Use The 24 Ports 10/1000M POE Injector are plug-and-play products. Once turned on, they automatically detect all Power over Ethernet terminals and supply inline power.

*. Input:100-240VAC 50/60Hz *. Output:48VDC 0.32A 15.5W *. AC socket: IEC320 C6 or C8 optional *.Ethernet rate: 10/100/1000Mbps gigabit *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standard:Active type, compliance with IEEE802.3 Standard *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 84% Min *.Ripple & Noise:4800mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black

FEATURES +/- 48V DC input; 24V Passive PoE output Provide power and access to device at the same time Power-in/Power-out LED display Easy-Positioning design, simple installation for vertical or horizontal direction Dual (DC-in/battery) input power redundancy OVERVIEW PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.

FEATURES Compliant with IEEE802.3bt 90W output power on 4-pairs Data Rate: 10/100/1000Mbps Full protection for OCP, OLP, and OVP LED indication for power and POE status 2-Pair PDs received power on 2-Pairs Automatic Detection and Protection of Non standard Ethernet Terminals

PT-PSE105GBS-E is an indoor rated fiber PoE Media converter specially designed for complex industrial backhaul and networking applications, special scenarios, like highway side, exurb, etc. Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, but can work outdoor by covered with waterproof case. PoE Injector for information kiosks After negotiating IEEE802.3bt standard PoE, the single PoE output port delivers 55Vdc, 1.63A up to 90W power with 6KV surge protection for remote PDs over 4 Pair at 10/100/1000Mbps data rates.  High quality PoE Injector works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65. It fully complies with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices, such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks. PoE Injector for POS For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. We are PoE supplier PoE Injector for information kiosks Specifications Parameter Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-E Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48 Vdc DC Input Current: 8.0A

Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports   condition LAN Port*1, DC Input   Port*1, PoE Output Port*1 Regulatory   Compliance     IEEE802.3bt     RoHS Compliance     WEEE Compliance Pass Through   Data Rates 10/100/1000 Mbps Output Pin   Assignment and Polarity:     4/5 (+), 7/8 () and 3/6 (+), 1/2 ()     Output Power Voltage: 55Vdc     User Port Power: 60W Guaranteen Input DC   Input Voltage: 36 to 72 Vdc     DC Input Current: 2.5A Working   Environment Operating   Temperature: 0 to 40     Operating Humidity: 20% to 80%, non-condensation     Storage Temperature: -20 to 70     Storage Humidity: 10% to 90%, non-condensation     Operating Altitude: up to 5000meters PoE Surge   Protection Protected   line: 1,2,3,4,5,6,7,8     Common mode surge protection(10/700us): 6KV      Differential mode surge protection (10/700us): 1.5KV      Line-Earth 1.2/50us (8/20us): 6KV     Line-Line 1.2/50us (8/20us): 4KV AC Surge   Protection Line-Earth   1.2/50us (8/20us): 2KV     Line-Line 1.2/50us (8/20us): 1KV Mechanical   Characteristics Case:   Plastic     Color: Black     Mounting: Wall-mounted     IP Rated: IP40     Connectors: Shielded RJ-45*2     Size: 193mmX 85mmX 41mm      Weight: 380gï¼?13.4ozï¼? LED Indicator Power   Indicator : Green     PoE Load Indicator :  Green   @â?¤30W                                          Blue      @ï¼?30Wâ?¤60W Warranty 2 year Safety   Approvals CE/FCC

PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV  Differential mode surge protection (10/700us): 1.5KV  Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm  Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year

New Passive PoE Injector single output 52VDC 90W PoE power supply Dual RJ45 PoE adapter for 5G Ethernet Switch Antenna *. Input:100-240VAC 50/60Hz*. Output: 52Vdc 90W *. AC socket: IEC320-C14, 3 pins socket *.Ethernet rate:1G/2.5G/5G *.Connector:1*RJ45 for PoE + 1*RJ45 for LAN *.Pin assignment: Pin 12/36 & 45/78, 4 pairs *.Protocol Standar:Non-IEEE802.3AF/802.3AT, Passive type *.Appliance: IP camera, poe switch, wifi AP ect *.output type: Single output *.Efficiency: 85% Min *.Ripple & Noise:480mV p-p *.MTBF:45000hours *. Protection:OVP SCP OCP OTP *. Material: Plastic housing, Compliance UL 94 V-0 *. Warranty:2 years *.Color: Black Company Profile * GRT established in 2007, is the manufacturer who specialized in research and development, production, sales, service as one. GRTis located in Shunde(the Kingdom of Home-Appliance), owns several Senior professional engineers, to research, develop and design kinds of power supplies and provide various customized solutions. *.All items is with 2% output accuracy and compliance with international standard. Owns license of Importing and Exporting and Pass kinds of international approvals like as UL, GS,TUV,CCC,CE, FCC,ROHS,ERP,PSE, CB,SAA ect, suitable for the global markets. *.Owns ISO9001:2015 and kinds of advanced machines for production and testing. *.Owns two green workshops which covers area 8000 square meters. monthly output upto 880K Our Services & Strength *. Offer OEM service, accept print your own logo and special requirements for package and others *. Experienced Technical team, to provide kinds of solutions *. Provided authorized certifications *. 100% Full Burn-In Testing, strictly inspect and control during production FAQ 1.MOQ :500pcsas the the first order, small qty (more than 100pcs) will be acceptable. 2.Sample terms *Common sample:2pcs are free offered, the buyer shall pay for the shipping cost and Tax; Leadtime within one week *. Special Sample: the buyer shall pay for the sample cost, shipping cost, Tax, R&D cost (if caused) Leadtime will be confirmed when the project starting 3. Mass production 20-25 working days, from the day got the confirmed order and payment 4. Shipment By Sea, By Air, By Train, By Express ect 5.Payment: T/T in advance, L/C