001x7 is a high purity premium grade ,high capacity, gelular, sulfonated, polystyrene cation resin supplied in the sodium or hydrogen form as moist, tough, uniform, spherical beads. 001x7 is intended for use in all water softening, dealkalization, deionization and chemical processing applications. Typical physical & Chemical characteristics: Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: Clear spherical beads Whole Bead Count: 97% min. Functional Groups: R-SO3 Ionic Form ,as shipped: Na Total Exchange Capacity, Na+ form, wet, volumetric: 1.8 meq/l min. Moisture Retention, Na+ form : 48-52% Particle Size Range: 0.3-1.20mm Less than 0.3mm1.0 %max Swelling Na+¡÷ H+: 10% max. Ca2+¡÷Na+: 5% max. Shipping Weight (approx.): 800 g/l Specific Gravity, moist Na+ Form: 1.29 PH Range, Stability: 0 - 14. 25L /bag,1000L /big bag with pallet.
BD001 is a premium grade, macroprous strong acid cation exchange resin, supplied in the sodium (Na) or hydrogen (H) form. It is a copolymer of styrene and divinylbenzene with sulfonic acid exchange group. The unique structure allows for high operating capacity and excellent chemical and physical stability. Its matrix promotes better kinetics and better diffusion rates into and out of the bead. It is mainly used in production of pure water, ultra-pure water and condensate polishing. It can also be used in waste water treatment and recovery of heavy metals. The series of BD001 contains four products: BD001 for general use; BD001 FC for the system of double compartment bed or floating bed; BD001 SC for dual bed; BD001MB for mixed bed, especially condensate water with high flow rate in mixed bed
BC118H is a premium grade, porous strong acid cation exchange resin. It is a copolymer of styrene and divinylbenzene with sulfonic acid exchange group. The unique structure allows for high operating capacity and excellent chemical and physical stability. Its matrix promotes better kinetics and better diffusion rates into and out of the bead. Due to the special surface area, pore size, it is used as catalysts in synthetic industry of Bisphenol-A synthesis etc.
BC118 is a bead form polystyrene sulphonate cation exchange resin. It has good mechanical stability and gives optimum performance in polar media. The product is supplied in hydrogen forms. BC118 is used in water softening, dealkalization, deionization, synthetic industry as catalyst and removal Aluminium from corrosion bath, removal Iron in solution etc.
Item Name Strong acid cation exchange resin (Gel) Bairy Resin Article#: 001x 7 Competitive Equivalents Amberlite IR-120; Dowex-50; Lewatit-100 Application: It is used mainly to soften hard water and produce pure water, as well as used in the hydro-metallurgy and sugar producing and medicine and no sodium glutamate industry, it can be used as catalyzer and dehydrating agent.
It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery.
Application: It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery. Typical physical and chemical properties: Matrix Structure Styrene series Appearance Camel to burnt brown non-transparent spherical grain Ionic form Na Moisture content (%) 45.00~55.00 Total exchange capacity (mmol/g) 4.50 Total exchange capacity (mmol/ml) 1.80 Shipping weight (g/ml) 0.77~0.85 True density (g/ml) 1.250~1.280 Particle size range (%) (0.315mm~1.250mm)95.0 Lower limit size (%) (0.315mm)1.0 Effective size (mm) 0.400~0.700 Uniformity coefficient 1.60 Sphericity after attrition % 90.00 Reference indexes in using PH range 1~14 Max. operation temperature (?) 120 Swelling upon complete conversion (%) 10 Working exchange capacity (mmol/L) 1100 Working flow rate (m/h) 15~30
Gel type strong acid cation exchange resin is used in water softening for feedwater with chlorine, the model is similar Tulsion T42
Ion exchange resin for water treatment Gel type strong acid cation exchange resin is used in water demineralization SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer. The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds. Equal to Amberlite IR120h, Purolite C100 Basic feature Application:Mixed bed system for water demineralization Matrix:ST-DVB Type: Gel Functional group:sulphonic acid Ionic form: hydrogen & sodium form Appearance:amber Spherical beads Physical and Chemical Characteristics 1 Total exchange capacity (eq/L) Na+ form â?¥1.9 2 Moisture retention (%) Na+ form 47-56 3 Particle size range (%) 0.315-1.25 mm â?¥95 4 Whole beads count (%) â?¥95 5 Shipping weight (g/ml) Na+ form 0.75-0.85 6 Specific gravity (g/ml) Na+ form 1.15-1.24 7 Uniformity coefficient
It is used mainly to soften hard water and produce pure water, as well as used in the hydro-metallurgy and sugar producing and medicine and nosodium glutamate industry, it can be used as catalyzer and dehydrating agent.
Cation exchange resin( softening water resin) for water treatment.SCG07 in Sodium,Gel type strong acid cation exchange resin can be used for softening water application.the particle size is in standard Gaussian distribution with 0.315-1.25mm 95%min. with high capacity,excellent mechanical strength and good ion exchange kinetics.Qingyun resin's durable bead strength facilitates more regeneration cycles.
Canftec TC008 Is a premium grade gel-type strong acid cation exchange resin produced by sulfonated styrene-divinylbenzene (DVB) copolymers in standard Gaussian size distribution. It has excellent chemical, physical and thermal stability, and high exchange capacity. TC008 in sodium form is widely used for water softening to reduce total hardness. In hydrogen form, it also can be used for water demineralization.
Canftech�® TC001D Is a premium grade gel type strong acid cation exchange resin produced by sulfonated styrene-divinylbenzene (DVB) copolymers in standard Gaussian size distribution. Its macroporous structure makes it can adsorb soluble organic molecules and can resist to osmotic & mechanical shock and oxidation. TC001D in sodium form could be used for water softening to reduce total hardness as well as softening of sugar solution.
SCG08 ion exchange resin Gel type strong acid cation exchange resin is used in water demineralization SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer. The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds visit iex-resin.com for details. Equal to Amberlite IR120h, Purolite C100 Basic feature Application:Mixed bed system for water demineralization Matrix:ST-DVB Type: Gel Functional group:sulphonic acid Ionic form: hydrogen & sodium form Appearance:amber Spherical beads Physical and Chemical Characteristics 1 Total exchange capacity (eq/L) Na+ form â?¥1.9 2 Moisture retention (%) Na+ form 47-56 3 Particle size range (%) 0.315-1.25 mm 95 4 Whole beads count (%) 95 5 Shipping weight (g/ml) Na+ form 0.75-0.85 6 Specific gravity (g/ml) Na+ form 1.15-1.24 7 Uniformity coefficient
SCG08 is a premium grade Gel type strong acid cation exchange resin, sodium form, with crosslinking8% DVB , which is produced by sulfonated styrene-DVB copolymer The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows excellent mechanical strength and good ion exchange kinetics, SCG08 in hydrogen form is widely used for water deminerazation to reduce the ions. SCG08 in sodium form is fit for common mixed bed system, which is one of the most cost-efficient system to remove anion & cation from water. equal to purolite C100, Amberlite IR 120
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
BC85 is an acrylic based gel weak acid cation exchange resin containing carboxylic groups. It can be used in the cases of softening, dealkalizing, deionization and chemical processing. It is ideally suited for softening of high TDS water and for special applications such as treatment of aqueous organic solutions and selective separation of heavy metal cations. It can also be used for isolating and purification of biochemical and pharmaceutical substances. BC85 has high operating capacity for divalent cations and extremely high regeneration efficiency. This resin is supplied in the hydrogen (H) form or in the sodium (Na) form for special applications. BC85 series contents three products: BC85 for general application; BC85FC for double compartment bed and floating bed system; BC85SC for dual bed system
BC85 is an acrylic based gel weak acid cation exchange resin containing carboxylic groups. It can be used in the cases of softening, dealkalizing, deionization and chemical processing. It is ideally suited for softening of high TDS water and for special applications such as treatment of aqueous organic solutions and selective separation of heavy metal cations. It can also be used for isolating and purification of biochemical and pharmaceutical substances. BC85 has high operating capacity for divalent cations and extremely high regeneration efficiency. This resin is supplied in the hydrogen (H) form or in the sodium (Na) form for special applications. BC85 series contents three products: BC85 for general application; BC85FC for double compartment bed and floating bed system; BC85SC for dual bed system
Corn starch,wheat starch,maltodextrin,dried apricot,pistachio, pistachio paste,raisin,hazelnut,hazelnut paste, cocoa powder, cocoa butter, organic cocoa powder, organic cocoa bean, cocoa bean,shea butter,wheat flour,corn flour, canned tuna, sardines, fruit juice, concentrates, pulp, fruit puree, mango puree,pectin, sunflower oil, sunflower kernel, sunflower lecithin, soya lecithin, desiccated coconut, coconut virgin oil, coconut flour, red split lentil, beta caroten,glucose, glucose syrup,corn gluten meal, acetic acid, caustic soda flakes, citric acid, ethanol, monomers, phosphoric acid, ammonium bicarbonate, maleic acid, stearic acid, sulphuric acid, sulfamic acid, calcium chloride, polyol, epoxy resin, pvc resin, fluorspar,guar gum,titanium ore.Distrubution and logistics
