It is used mainly to soften hard water and produce pure water, as well as used in the hydro-metallurgy and sugar producing and medicine and nosodium glutamate industry, it can be used as catalyzer and dehydrating agent.
BD001 is a premium grade, macroprous strong acid cation exchange resin, supplied in the sodium (Na) or hydrogen (H) form. It is a copolymer of styrene and divinylbenzene with sulfonic acid exchange group. The unique structure allows for high operating capacity and excellent chemical and physical stability. Its matrix promotes better kinetics and better diffusion rates into and out of the bead. It is mainly used in production of pure water, ultra-pure water and condensate polishing. It can also be used in waste water treatment and recovery of heavy metals. The series of BD001 contains four products: BD001 for general use; BD001 FC for the system of double compartment bed or floating bed; BD001 SC for dual bed; BD001MB for mixed bed, especially condensate water with high flow rate in mixed bed
BC118H is a premium grade, porous strong acid cation exchange resin. It is a copolymer of styrene and divinylbenzene with sulfonic acid exchange group. The unique structure allows for high operating capacity and excellent chemical and physical stability. Its matrix promotes better kinetics and better diffusion rates into and out of the bead. Due to the special surface area, pore size, it is used as catalysts in synthetic industry of Bisphenol-A synthesis etc.
BC118 is a bead form polystyrene sulphonate cation exchange resin. It has good mechanical stability and gives optimum performance in polar media. The product is supplied in hydrogen forms. BC118 is used in water softening, dealkalization, deionization, synthetic industry as catalyst and removal Aluminium from corrosion bath, removal Iron in solution etc.
Appearance: golden to brown global granule Moisture %: 46-52 Complete exchange capacity (mmol/g) í¦4.5 Total bulk exchange capacityú¿mmol/gú¬í¦1.8 Wet apparent density (g/ml): 0.77-0.87 Specific Gravity, moist (g/ml): 1.24-1.28 Grainsizeú¿0.315-1.25ú¬mm%: í¦98 Effective grain size mm: 0.4-0.7 Uniform coefficient: í_1.7 Sphere rate after abrasion %: í¦95 Pack: in 25kgs/wpp bag
We deals in the following products :- 1) PVC Resin 2) Caustic Soda Flakes
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Item Name Strong acid cation exchange resin (Gel) Bairy Resin Article#: 001x 7 Competitive Equivalents Amberlite IR-120; Dowex-50; Lewatit-100 Application: It is used mainly to soften hard water and produce pure water, as well as used in the hydro-metallurgy and sugar producing and medicine and no sodium glutamate industry, it can be used as catalyzer and dehydrating agent.
It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery.
Application: It is mainly used to soften hard water,produce pure water and for condensate purification; It is also using waste water treatment and heavy metal recovery. Typical physical and chemical properties: Matrix Structure Styrene series Appearance Camel to burnt brown non-transparent spherical grain Ionic form Na Moisture content (%) 45.00~55.00 Total exchange capacity (mmol/g) 4.50 Total exchange capacity (mmol/ml) 1.80 Shipping weight (g/ml) 0.77~0.85 True density (g/ml) 1.250~1.280 Particle size range (%) (0.315mm~1.250mm)95.0 Lower limit size (%) (0.315mm)1.0 Effective size (mm) 0.400~0.700 Uniformity coefficient 1.60 Sphericity after attrition % 90.00 Reference indexes in using PH range 1~14 Max. operation temperature (?) 120 Swelling upon complete conversion (%) 10 Working exchange capacity (mmol/L) 1100 Working flow rate (m/h) 15~30
