Api Chiksan Swivel Joint Fig 1502 Suppliers and Manufacturers

Specification: 1).Size: 2'', 3'', 4'' 2).Working pressure:6000-20000psi(42mpa-140mpa) 3).Working temperature: -29â°c~121â°c. 4).Application enrvironment: standard or h2s 5).Standard: api standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

Pup joint is cementing and fracturing equipment delivery High Pressure Fluid Control Products. Widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage transmission lines on pipelines. Pup joint made of high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast, reliable connection, and reliable. Multiple seal design and high precision, to ensure the sealing performance of Pup joint. How to contact us?

Standard chiksan joint/chiksan swivel joint Product description 1).Size: 2'', 3'', 4'' 2).Working pressure:6000-20000psi(42mpa-140mpa) 3).Working temperature: -29°c~121°c. 4).Application enrvironment: standard or h2s 5).Standard: api standard 1 our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa. 2 various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa). 3 we can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4 patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5 all sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment. 6 sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7 usually good lubrication can ensure that swivel joints work normally without much maintenance.

Description Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.

Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. Swivel joint is a kind of high pressure fluid control products, which is commonly applied to cementing and fracturing equipment. It is used to change the pipeline connection direction, to make it more convenient and easier to connect the pipe fittings. It is widely used in acid working environment, to connect the high pressure discharge pipe, suction pipe, temporary flow pipeline, well test line and high pressure transmission line.

H2S service API 16C Chiksan Swivel Joint Swivel Joint is a mental pipe adapter installed with roller bearings based on the introduced technology from FMC and our technical innovation. The swivel joints with size ranging from 1â?? to 4â?? and rated working pressure rang of 25-140MPa (3626 PSI-20 000PSI) are available. Various models of swivel joints and relevant repair kits for normal temperature, low temperature and sour gas (H2S) condition can be provided. Long Radius Swivel Joints 10,20,30,50,60,80,100 types for option; Short Radius Swivel Joints 10,20,30,40,50,60,70,80 types for option.

1. High quality rotary joints and two delicate bearing installed in high stiffness rotor are to ensure vibration-free performance in long-term operation. 2. Rotors undergo special heat treatment to increase stiffness. 3. Stationary ring enclosure is made out of concentrated carbon graphite, anti-wear-out, waterproof, and suitable for dry operation. 4. Especially the area of rotating sealing faces has to be minimized to the minimum, even under higher-pressure environment. 5. The effect of equilibrium in sealing face from accumulation of our company experiences in mechanics is the best. 6. Adaptation of stationary ring made out of bronze in RF-type rotating connector is for the use in high-pressure 200 bar.

í+ recommended operating specifications 1. Max. Hydraulic pressure : 210 bar (50rpm) 2. Max. Air pressure : 10 bar 2. Max. Temperature : 100ój 3. Max. Speed : 750rpm í¦ all models available with the following options 1. Shaft : alloy steel 2. Housing : alloy steel 3. Standard threads : rc

Available in sizes 3/4" through 3 " up to 15,000 PSI non-stock cold working pressure, our Swivel Joints offer the following features. Minimum flow restriction Heavy duty hex head style ball loading plug Grease retainer ring (ensures clean ball race) Standard packing units Superior hardened ball races ensure uniform surface hardness and depth for longer life under severe thrust and radial loading Standard Swivel Joints are provided with API line pipe threads. Other end connections are available on request Available for standard and sour service All sizes are available in 8 styles, for 360 rotation in 1, 2 or 3 planes. For price and specification please contact us

We can supply Spiral welded API pipes, Seamless pipe, GI pipe, fittings and expansion joint.

Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.

Wellhead Swivel Joint 1" Fig 1502 x 15000psi Working PressureWellhead Fitting 1" x Fig 1502  Swivel JointGeneral of the 1" Fig 1502 Swivel JointJC Wellhead is specilized in designed and manufactured various models of swivel joints and their repair kits. The 1" Fig 1502 Swivel Joint is suitable for normal or low temperature and H2S environments. The sizes of swivel joint is ranging from 1" to 4" and related Working Pressure ranging from 2000psi to 20000psi. There are long and short radius swivel joints available. Long radius swivel joints can minimize fluid shock, and has better performance of resistance for scouring an corrosion. We also need to use short radius swivel joint for low pressure operation due to limited installation space.Specification of the Swivel JointNominal Diameter(in)Connection TypePressure (psi)Standard Length (mm) AStandard Length (mm) BStandard Length  (mm) C1"Inner Thread100001811891811"1502(M*F)150002131882131"1502(M*F)150002131882131.5"Inner Thread100002022382021.5"1502(M*F)150002572382571.5"1502(M*F)150002572382572"Inner Thread100002292722292"1502(M*F)150002772722772"1502(M*F)150002772722772"1502(F*F)150002242722772"200(M*F)200002772753152"2002(M*M)200003182773183"Inner Thread150003274173273"1502(M*F)150003684173663"1502(M*F)150003664173663"2002(M*F)200005185385184"1002(M*F)100004094604114"1002(M*F)100004044604114"1502(M*F)15000518538518Wellhead Swivel Joint 1" Fig 1502 x 15000psi Working PressureWellhead Fitting 1" x Fig 1502  Swivel Joint

We offer various types of Inconel Flanges that are provided in ANSI, DIN, JIS, BS and ASME standards. These Inconel flanges are available in following sizes and specifications. â?¢ Production standard: ANSI/ASME B16.5, ANSI B16.47â?¦ API, DIN, JIS, BS â?¢ Production size: 1/2 inch â?? 48 inch (15mm â?? 1200mm) â?¢ Grades: o ASTM / ASME UNS 6600 Inconel 600 o ASTM / ASME UNS 6601 Inconel 601 o ASTM / ASME UNS 6625 Inconel 625 o ASTM / ASME UNS 7718 Inconel 718 o ASTM / ASME UNS 7751 Inconel X-750 o ASTM / ASME UNS 8800 Inconel 800 o ASTM / ASME UNS 8810/11 INCOLOY 800H o ASTM / ASME UNS 8825 INCOLOY 825 Range: Weld Neck, Slip On, Blind, Socket Weld, Lap Joint, Spectacles, Ring Joint, Orifice, Long Weld Neck, Deck Flange, etc Class: 150#, 300#, 400#, 600#, 900#, 1500# & 2500#

Standard Forged Flanges (Weld-neck, Slip-on, Socket-weld, Lap-joint, Blind and Screwed Types) are manufactured by us to specifications of ASME B16.5, ASME B16.47, ASME B16.48, BS EN 1092, BS 4504, API-605, API-590, MSSSP44, DIN 2632 to 2638, DIN 2576, 2642, 2527, 2566. Flanges cover a full range of pressure ratings of these specifications (150 â?? 2500 psi for ASME & PN6-PN400 for DIN / EN flanges). Non-standard flanges are made upto a diameter of 4500 mm and the weight not exceeding 5,000 kgs.