Function and features:
1. Range of application: PE pipe and pipe fitting.
2. Pipe diameter range: 20~630 mm
3. Output power: 3.5 kw, 8 kw, 12 kw
4. Input voltage: 220 v
5. Input frequency: 40~65 hz
6. Weight of machine: 20 kgs.
7. Dimension of machine: 300*200*250 mm
8. Data input mode: manually by keypad input, or automatically by barcode scanner input.
Technical specification:
1. High-level MCU is used as control core, with abundant parameter setting, measuring and perfect protective function.
2. High brightness LCD, Chinese and English operation, man-machine interactive interface.
4. Wide power supply and voltage input, suitable for on-the-spot electric network wave.
5. High precision control to electric energy and time, insuring welding quality.
6. Swiftly output response time when power supply breaks, high stability.
7. Optimizing design and SMT welding craftwork, reducing failure rate of whole machine.
8. 10 phases programmable welding functions, suitable for welding requirement of various fittings.
The machine is contained in a aluminum-alloy box, and then packed in carton. The dimension of aluminum-alloy box is 460-240-300 mm.
Our company milled colum and booms are robustly con-structed to give adequate support and stability essential for the precision welding applications.
They can reach either inside of small internal diameters or outside of very big diameters for welding of both circumferential and longitudinal joints.
We can provide manipulators in the forms of radial position, fixed and fixed rotating as your requirments.Additional, we will equip sorts of welders with the fanctions of tracing, moritoring and solder recovering and converying, etc.
KEW-4-M plastic pipe hand-held extrusion welding machine adopts the integrated design of pre-heated air and screw extruder, which conforms to the theory of human engineering. It is small and light; moreover, the high welding strength, perfect sealing, wide welding seam, high output, fast and one-time-finish welding; the machine also has the integrated air source (other air source is unnecessary), it is especially suitable for operating outside.
Parameter :
Article no. KEW-4-M800 KEW-4-M1020
Name small power extrusion welding machine
Voltage 220 v
Power of extruder 800 w 1020 w
Power of hot air blower 2000 w
Max. Output capacity. 1.8 kg / h 3 kg / h
Weight 5 kg.
Model Features
Automatic laser welder adopts manual programming automatic dual-purpose worktable, electric focusing, 16 group precise waveform control; Suitable for mold repair, and welding all kinds of electronic products; The main advantages as follows:
(1) Electric regulate the lever of laser focus: It is convenient to regulate lever of laser rapidly through the manual button on the panel, which makes the laser focusing become simple and fast.
(2) Positioning function of welding spot: It through the red light direction to find the rough place of welding spot on the workpiece, aiming at the location of welding spot accurately by using Binocular high-magnification microscope observation.
(3) Electric regulating multiple size of scattering mirror (regulating the facula size).
(4) Manual control the movement of XY mobile worktable, optional automatic welding function of Electric control at the same time, which can realize automatic welding of products in high speed. .
(5) Integrative design, small size, compact structure, so it's Convenient and practical..
Technical parameters
Model:HL-W200
Working table dimension :200mmX100mm(customized)
Welding depth :0.1-2mm
Max output power :200W
Laser wavelength :1064nm
Pulse width :0.3-20ms
Welding frequency :1-100HZ
Pump source :Xenon lamp
Single pulse engrgy :105J
Consumed power :18KW
Electrical source :220V ¡À10%/50HZ/40A
Adjustable facula size :0.2-2mm
Waveform number :16
Power consumed :¡Ü6KW
Cooling Mode :Water-cooling
Control of worktable :CNC Programming
Optional accessories :Anti-laser glasses.
Product Features
1.Accord with Europe CE standard
2.Suitable for the enterprise ( has large processing quantity and urgent processing period)
3.Equipped with honeycomb working table and automatic feeding system, continuous process.
4.Adopt electric lift platform, Rotary clamp, widen the appliance
5.Not only saves the computer resources, but also promotes the movement performance
6.The most advanced high-power semiconductor technique and maintenance-free.
Technical Parameters
Model of Machine :HLSD-50
Laser wavelength :1064nm
Laser Type :YAG
Average laser output power :50W
Character Height :0.25mm-50.00mm
Character Width :0.07mm-0.20mm
Character Depth :0.07mm-0.20mm
Marking range :110*110mm(optional)
Marking line speed :¡Ý60m/min
Relative Humidity :45%-85%
Repeat Accuracy :0.0018mm
Output stability :5%.
Wooden case.
3585 Welded Wire Mesh Suppliers
Short on time? Let Welded Wire Mesh sellers contact you.
1. Multi-functional with gas shielded arc welding, MMA welding and self-shielded FCAW available
2. Adopt IGBT as power device, with unique control mode, high reliability.
3. High duty cycle, be able to carry out long-time welding.
4. Closed loop feedback control, workable under network voltage fluctuation within range ± 15%.
5. Adjustable welding voltlage and circuit, excellent welding characteristics.
6. Unique welding control circuit with dynamic characteristics is used in gas shielded arc welding, stable welding arc, little spatter, beautiful shaping, high welding efficiency.
7. Slow wire feeding, high no-load, remove the tip ball after welding, easy arc-starting.
8. In MMA welding, stable welding current, excellent arc starting, be able to use all types of electrode.
9. Great reduction in magnetic loss obviously enhances the welding efficiency and energy saving effect.
10. Stable welding can be realized at the lowest current of 30A when using welding wire with a diameter of 0.6mm.
Applicable Materials: Low carbon steel. High tensile steel, ordinary steel.
Scope of Aplication: Thin plate welding field such as automobile, motorcycle accessories, Steel-Wood furniture, light steel structure etc.
Scope of Aplication: Thin plate welding field such as automobile, motorcycle accessories, Steel-Wood furniture, light steel structure etc.
Efficiency (%) 85
Feeding Speed(M/MIN) 2.5-13
Model MIG250 (IGBT)
Input power voltage/frequency(V/Hz) AC220¡À 15% (Single Phase, 50/60Hz)
Rated input power capacity(KVA) 12.2
Input Current (A) 12.6
Rated Output Current (A) 250
Rated Output Voltage (V) 60
Duty cycle (%) 60
Output current range (A) 30-500
Output current range (V) 15.5-26.5
Insulation Class F
Protection class IP23
Type of Wire Feeder Compact
Diameter of Spool (mm) 270
Postflow Time (s) 1¡À 0.5
Power Factor(cos¦Õ ) 0.93.
Our designed and manufactured YZG type Welding Tank Rotator absorbs the excellence from the same products from the domestic and forign market manufacturing, which is made according to the pressure vessel
manufacturer's requirement. This product is applied in the manual welding and automatic welding for metallic tank, it is the necessary for the pressure vessel manufacturing. It has the good character as advanced technology, reliable quality, easy operation and so on.
This tank rotator has two types including self-alignment and adjustable. It can suit for the diffrence diameter tank within the range and achieve the stepless speed adjusting under the setted welding parameter, which has the good character as small noise on the transmission and steady rotation for the working table.
Main technical parameter
Type : YZG-5,YZG-10,YZG-20,YZG-40,YZG-60,YZG-80,YZG-100.
-The worktable could be rotated ( in 360¡ã)or tilted (in 90-120¡ã)allowing work piece to be welded at the best position.
-Variable Frequency control (VFD) speed by rotating and motor-driven speed regulation by tilting from which customers can choose in line with operational requirements.
-Electric control system composed of electric cabinet and manual control panel making it easy to operate.
-Equipped with slewing bearing which helps increase the loading capacity and makes the rotation smooth.
- Worktable is manufactured with six M30T bolt grooves used to clamp and position the work pieces.
-Several concentric grooves are processed onto the surface of the worktable to help position the work piece at the center.
-The whole rack will not deform even long time use because of annealing treatment.
ZHB-50:
Max Loading Capacity:5T
Power source: 380V 3 phases 50Hz
Rotating Speed: 0.05£0.5rpm
Rotating Angle:360¡ã
Tilting Speed: 0.2
Tilting Angle: 120¡ãrpm
Diameter of Table:¦µ1500mm
Output: rotate: 1.5kw
Tilt: 3 kw
Rotating Speed Adjust:VFD
Max Gravity: 300mm
Max Eccentricity:200mm.
Features
1. The column and boom are manufactured with cold-formed welded type structure. After the annealing process and finish machining, they possess fine rigidity and strength.
2. To ensure safety, the boom lifting device uses a ratchet-and-pawl structure and is equipped with a fall protection device.
3. Frequency control is applied for the adjustment of retracing speed, greatly improving the reliability and stability of the fixed welding manipulator.
4. The front end of the boom is manufactured with a cross adjustment structure which can be adjusted through the manual control box.
5. The eight guide wheels all utilize eccentric structure. During installation and set up, the lead rail tension can be adjusted by using the eccentric shaft. After this adjustment, the rail should be locked with double nuts. Fixed welding manipulator (column boom manipulator)
6. The column rotation can be carried out with manual and electric control then locked.
7. The electrical equipment of the fixed welding manipulator includes a manual control box and electric cabinet.
8. Trolley, manned seat and worktable, drag chain, seam tracing and monitoring system, and flux recovering system are optional.
