Self aligned tank turming rolls has four motorized rollers which use worm gears To assure the wheels rotation . When we put the tanks on the rotator , the wheels Can open by itself. This type machine is widely used in pressure vessel fabrications , Wind power , small and large pipe , boiler vessels , shipyards and many more .
The rotators are built in capacities from 3ton to 200 ton. According to capacity load, the rotator wheels are of pu or full metals, which can ensure the support capacity and maintain working long time. The specifications are as follow 1. Each set includes 01 powered unit and 01 idler unit with electrical control system. 2. Schneider / taian inverter 3. Siemens/ schneider /chnt electrical components 4. Remote control with 5m cables 5. Ce & iso approved
Material: st52, e355, a106b, c20, ck45 Id tolerance :h8 Bks or sr condition In bundle, with plastic caps, oiled
Material: St52, E355, A106B, CK45 H8 tolerance, BKS condition. Ra0.2-0.4 in bundle, with caps, oiled
material: St52, E355, A106B, CK45 H8 tolerance, BKS condition. Ra0.2-0.4 in bundle, with caps, oiled
Welding rotator (turning roll, roller bed): -Composed of driving/power unit, idler unit, electric cabinet and manually controlled panel. -Manual controlled panel with buttons makes operation much convenient. -Distance between rollers can be adjusted automatically to fit pipes/tanks with different diameters. -Frequency speed control is applied for the adjustment of roller speed. -Two steel rollers are used at both ends of rubber rollers to protect rubber rollers. -Rollers material could also be polyurethane or steel. -Widened rollers increase life span of rollers and reducer pressure on pipes/tanks. Clear packing.
-The worktable could be rotated ( in 360¡ã)or tilted (in 90-120¡ã)allowing work piece to be welded at the best position. -Variable Frequency control (VFD) speed by rotating and motor-driven speed regulation by tilting from which customers can choose in line with operational requirements. -Electric control system composed of electric cabinet and manual control panel making it easy to operate. -Equipped with slewing bearing which helps increase the loading capacity and makes the rotation smooth. - Worktable is manufactured with six M30T bolt grooves used to clamp and position the work pieces. -Several concentric grooves are processed onto the surface of the worktable to help position the work piece at the center. -The whole rack will not deform even long time use because of annealing treatment. ZHB-50: Max Loading Capacity:5T Power source: 380V 3 phases 50Hz Rotating Speed: 0.05£0.5rpm Rotating Angle:360¡ã Tilting Speed: 0.2 Tilting Angle: 120¡ãrpm Diameter of Table:¦µ1500mm Output: rotate: 1.5kw Tilt: 3 kw Rotating Speed Adjust:VFD Max Gravity: 300mm Max Eccentricity:200mm. clear packing.
Features 1. The column and boom are manufactured with cold-formed welded type structure. After the annealing process and finish machining, they possess fine rigidity and strength. 2. To ensure safety, the boom lifting device uses a ratchet-and-pawl structure and is equipped with a fall protection device. 3. Frequency control is applied for the adjustment of retracing speed, greatly improving the reliability and stability of the fixed welding manipulator. 4. The front end of the boom is manufactured with a cross adjustment structure which can be adjusted through the manual control box. 5. The eight guide wheels all utilize eccentric structure. During installation and set up, the lead rail tension can be adjusted by using the eccentric shaft. After this adjustment, the rail should be locked with double nuts. Fixed welding manipulator (column boom manipulator) 6. The column rotation can be carried out with manual and electric control then locked. 7. The electrical equipment of the fixed welding manipulator includes a manual control box and electric cabinet. 8. Trolley, manned seat and worktable, drag chain, seam tracing and monitoring system, and flux recovering system are optional. Clear packing.
Supplier: Welding positioned (turning table), welding rotator turning roll), welding manipulator (column and boom)
