Welding rotator (turning roll, roller bed): -Composed of driving/power unit, idler unit, electric cabinet and manually controlled panel. -Manual controlled panel with buttons makes operation much convenient. -Distance between rollers can be adjusted automatically to fit pipes/tanks with different diameters. -Frequency speed control is applied for the adjustment of roller speed. -Two steel rollers are used at both ends of rubber rollers to protect rubber rollers. -Rollers material could also be polyurethane or steel. -Widened rollers increase life span of rollers and reducer pressure on pipes/tanks. Clear packing.
Material: st52, e355, a106b, c20, ck45 Id tolerance :h8 Bks or sr condition In bundle, with plastic caps, oiled
Material: St52, E355, A106B, CK45 H8 tolerance, BKS condition. Ra0.2-0.4 in bundle, with caps, oiled
material: St52, E355, A106B, CK45 H8 tolerance, BKS condition. Ra0.2-0.4 in bundle, with caps, oiled
-The worktable could be rotated ( in 360¡ã)or tilted (in 90-120¡ã)allowing work piece to be welded at the best position. -Variable Frequency control (VFD) speed by rotating and motor-driven speed regulation by tilting from which customers can choose in line with operational requirements. -Electric control system composed of electric cabinet and manual control panel making it easy to operate. -Equipped with slewing bearing which helps increase the loading capacity and makes the rotation smooth. - Worktable is manufactured with six M30T bolt grooves used to clamp and position the work pieces. -Several concentric grooves are processed onto the surface of the worktable to help position the work piece at the center. -The whole rack will not deform even long time use because of annealing treatment. ZHB-50: Max Loading Capacity:5T Power source: 380V 3 phases 50Hz Rotating Speed: 0.05£0.5rpm Rotating Angle:360¡ã Tilting Speed: 0.2 Tilting Angle: 120¡ãrpm Diameter of Table:¦µ1500mm Output: rotate: 1.5kw Tilt: 3 kw Rotating Speed Adjust:VFD Max Gravity: 300mm Max Eccentricity:200mm. clear packing.
Features 1. The column and boom are manufactured with cold-formed welded type structure. After the annealing process and finish machining, they possess fine rigidity and strength. 2. To ensure safety, the boom lifting device uses a ratchet-and-pawl structure and is equipped with a fall protection device. 3. Frequency control is applied for the adjustment of retracing speed, greatly improving the reliability and stability of the fixed welding manipulator. 4. The front end of the boom is manufactured with a cross adjustment structure which can be adjusted through the manual control box. 5. The eight guide wheels all utilize eccentric structure. During installation and set up, the lead rail tension can be adjusted by using the eccentric shaft. After this adjustment, the rail should be locked with double nuts. Fixed welding manipulator (column boom manipulator) 6. The column rotation can be carried out with manual and electric control then locked. 7. The electrical equipment of the fixed welding manipulator includes a manual control box and electric cabinet. 8. Trolley, manned seat and worktable, drag chain, seam tracing and monitoring system, and flux recovering system are optional. Clear packing.
Product name 62S Plus Fusion Splicer Model No. 62S Plus+ WITH CT-08 Dimensions 46 W x 159 D x 150 H (mm) Cladding Diameter 80 to 150 microm Power Supply 100 to 240 V AC Wind Protection Maximum wind velocity of 15 m/s (34 mph) Weight 2.5 Kg Coating Diameter 100 to 1000 microm Fiber Cleave Length 5 to 16 mm Splicing Modes 100 preset and user programmable modes Product Keywords Traditional Core Alignment with the 62S+ Fiber Splicer
Polyurethane wheel, heat-resistant, wear-resistant, non-skid Stepless adjustable speed with ac motor, wildly speed adjustable range. Special wheel design, increasing the applicable diameter of the workpiece. With compact, simple and light structure, adapts to various working environment. Equipped with manual control box, the initiation and termination of roller wheel frame are easily taken under controlled. The manual control box can real-time control the rotating speed, on/off, positive/reverse rotation of roller wheel frame. Suitable for welding and cutting of the elongated workpiece. Model Nhtr-3000 Power input phase1 phase ac 110/220v 50/60hz Turning capacity3000kg Load capacity 3000kg Max speed 1500mm/min Diameter rangeF40-1400mm Drive motor Ac220v200w Roller typeNh, 50mm(w)*200mm(f) Dimension Drive:800*370*360mm Ldler:800*260*360mm Jinan north equipment co., ltd is a sino- foreign joint venture enterprise , which is located in jinan pioneering park for overseas scholars. Jinan north equipment co., ltd’s leading products include :light welding positioner , heavy duty welding positioner, light welding turning roll , nc flame/plasma cutting machine , portable flame cutter , welding oscillator and all kinds of wire feeding parts .Our company’s products have been exported to europe , america , australia , southeast asia and other regions , got good reputation and trust from our domestic and oversea clients.