Product Origin : Vietnam Key Specifications/special Features : Specific Quotation According To Customers' Requirements
Construction material.
VFLOOR2 are two component waterproof Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦ It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles. Layer-thickness 2-10mm Can be pumped Product name: Self leveling concrete without primer VFLOOR2 Compressive strength: >35 Mpa, 28 days later Flexural strength: >7 Mpa, 28 days later Application Temperature: 5-30 degree Mixing ratio: 20kgs powder + 5kgs Liquid Feature & Benefits: - Two component, just mix A+B - Waterproofing - Good adhesion to primed substrates - Good flow, self smoothing - Rapid setting and early strength - Easy and quick to lay Mixing: Convenient easy mix ratio A:B = 4:1 by mass. Mix slowly and continuously to form a homogeneous mixture. The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing. Ready for foot traffic after approx. 24 hours. Drying time: Prevent draughts across the floor to avoid localized premature drying At ambient temperature, VFLOOR2 will appear to be dry after approximately 24 hours, ready for foot traffic after approx. 24 hours. Floor laying may commence after 48 hours. Coverage: At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2 Shelf Life: 9 months.
Granite chip & broken stone with many sizes for construction.
Construction natural stone.
Construction materials.
Construction material.
Technical specifications Exist status : brown liquid Solid content : 40 1.0 Viscosity : 150 50 cps. Specific gravity : 1.10 ¡ó 0.02 Ph : 6.0 1.0 Chloride content : below 0.001% In a 200kg drum In 1m3 ibc In a flexi bag
Technical specifications Exist status : brown liquid Solid content : 40 1.0 Viscosity : 220 50 cps. Specific gravity : 1.10 0.02 Ph : 6.0 1.0 Chloride content : below 0.001% In a 200kg drum In 1m3 ibc In a flexi bag
Construction equipment.
VN SEAL 109 is a liquid applied, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system with moderate to high degree of elasticity depending on system buildup Advantages - Crack-bridging & Elastic - Good Impermeability against water ingress - Highly water resistant, arrest salt petre and prevent carbonation - Extremely good bonding with high abrasion resistance - Simple application and fast curing - It has excellent adhesion to concrete, brickwork and corrugated asbestos cement sheets Appication - Used as a seamless, impervious coating on flat roof for both exposed and concealed waterproof coating system - Basements - Water retaining structures - Underground concrete structures, pits, basins, sumps etc. - Used as waterproofing coating on concrete, screed, mortar, brick tiles, cement tiles, plaster or porous stone substrates Packaging 1) Part (A+B) : 28 kg ready to mix units x 2 sets Part A is grey power: 20kg/Barrel Part B is white milky liquid: 8kg/Barrel 2) Part (A+B) : 14 kg ready to mix units x 2 sets Part A is grey power: 10kg/Barrel Part B is white milky liquid: 4kg/Barrel Shelf life 12 months from the production date Storage conditions Keep in cool and dry places
VNSEAL 104W is a two component, white colour, flexible cementitious waterproofing membrane consisting of a synthetic resin mixed with a blend of selected cement and well-graded fillers. When mixed, VNSEAL 104W becomes a smoooth slurry and is easily applied by brush, roller or suitable spraying equipment. VNSEAL 104W can be applied onto damp substrates. The cured membrane is flexible, durable and weather resistant and has excellent adhesion to most building substrates. Its unique chemical structure provides a breathable membrane that is permeable to water vapour and yet impermeable to water. VNSEAL 104W is capable of bridging hairline cracks. Typical Uses: Waterproofing of Basement walls and lift pits Waterproofing of potable water tanks, waterproofing of reservoirs, culverts, storm drains, canal, water retaining and water excluding structures. Waterproofing of kitchens and toilets Waterproofing of balconies and planter boxes Waterproofing of swimming pools and water features Waterproofing to precast gable end walls Waterproofing to RC flat roof (re-roofing-exposed and concealed applications) and gutters. Waterproofing to external wall prior to installation of claddings. Advantages: Pre-packed Easy to mix and apply Excellent waterproofing qualities â?? able to withstand high hydrostatic pressure Excellent adhesion to concrete, masonry, ceramics, natural and artificial Flexible able to bridge hairline cracks up to 2mm Does not contain chloride or other corrosive salts which cause efflorescence Non toxic- suitable for use in waterproofing of potable water tanks Able to withstand light foot tracfficking Can be applied onto damp substrates Weathering resistant Mixing Instructions: Pour Part A (liquid) into Part B (White powder)container and mix with a slow speed mechanical mixer until homogenous and lump free. Allow the mix to stand for 5 minutes and re-stir manually before use. Application: For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane Apply the first coat of VNSEAL 104W and allow it to dry. At the same time, ensure that all joints and corners are properly coated, preferable with a brush. Allow membrane to dry for approximately 2 hours before application of the second coat VNSEAL 104W the professionals choice of quality products and system for building construction Shelf life Expiry date 12 months from the production date Storage conditions Dry, cool, shaded place Packaging 1) Combo A: 4kg - B: 2kg Component A is White powder: 4kg/barrel Component B is milky white liquid: 2kg/plastic can 2) Combo A: 10kg - B: 5kg Component A is White powder: 10kg/barrel Component B is milky white liquid: 5kg/plastic can 3) Combo A: 20kg - B: 10kg Component A is White powder: 20kg/barrel Component B is milky white liquid: 10kg/plastic can
VNSEAL 104 is a two component, flexible cementitious waterproofing membrane consisting of a synthetic resin mixed with a blend of selected cement and well-graded fillers. When mixed, VNSEAL 104 becomes a smoooth slurry and is easily applied by brush, roller or suitable spraying equipment. VNSEAL 104 can be applied onto damp substrates. The cured membrane is flexible, durable and weather resistant and has excellent adhesion to most building substrates. Its unique chemical structure provides a breathable membrane that is permeable to water vapour and yet impermeable to water. VNSEAL 104 is capable of bridging hairline cracks. Typical Uses: Waterproofing of Basement walls and lift pits Waterproofing of potable water tanks, waterproofing of reservoirs, culverts, storm drains, canal, water retaining and water excluding structures. Waterproofing of kitchens and toilets Waterproofing of balconies and planter boxes Waterproofing of swimming pools and water features Waterproofing to precast gable end walls Waterproofing to RC flat roof (re-roofing-exposed and concealed applications) and gutters. Waterproofing to external wall prior to installation of claddings. Advantages: Pre-packed Easy to mix and apply Excellent waterproofing qualities able to withstand high hydrostatic pressure Excellent adhesion to concrete, masonry, ceramics, natural and artificial Flexible able to bridge hairline cracks up to 2mm Does not contain chloride or other corrosive salts which cause efflorescence Non toxic- suitable for use in waterproofing of potable water tanks Able to withstand light foot tracfficking â?¢ Can be applied onto damp substrates â?¢ Weathering resistant Mixing Instructions: Pour Part A (liquid) into Part B (powder)container and mix with a slow speed mechanical mixer until homogenous and lump free. Allow the mix to stand for 5 minutes and re-stir manually before use. Application: For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane Apply the first coat of VNSEAL 104 and allow it to dry. At the same time, ensure that all joints and corners are properly coated, preferable with a brush. Allow membrane to dry for approximately 2 hours before application of the second coat VNSEAL 104 the professionals choice of quality products and system for building construction Shelf life Expiry date 12 months from the production date Storage conditions Dry, cool, shaded place Packaging 1) Combo A: 4kg - B: 3kg Component A is Grey powder: 4kg/barrel component B is milky white liquid: 3kg/plastic can 2) Combo A: 10kg - B: 7,5kg Component A is Grey powder: 10kg/barrel component B is milky white liquid: 7,5kg/plastic can 3) Combo A: 20kg - B: 15kg Component A is Grey powder: 20kg/barrel component B is milky white liquid: 15kg/plastic can
NUMBER 1 : is a unique chemical treatment for the waterproofing, protection and repair of concrete. The barrel 5kgs is ideal for small projects. NUMBER 1 : is the most chemically active product within the Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints, and honeycombs. NUMBER 1 : prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of the concrete and cement-based materials. Advantages: - Less costly to apply than most other methods - Can be used on damp substrates - Resists extreme hydrostatic pressure - Becomes an integral part of the substrate - Can seal hairline cracks up to 0.4mm - Allows concrete to breathe - Chloride-free - Highly resistant to aggressive chemicals - Non-toxic - Does not require a dry surface - Cannot puncture, tear or come apart at the seams - No costly surface priming or leveling prior to application - Does not require protection during backfilling or during placement of steel, wire mesh or other materials - Not subject to deterioration - Permanent Application: - Reservoirs - Sewage and Water Treatment Plants - Underground Vaults - Secondary Containment Structures - Foundations - Tunnels and Subway Systems - Swimming Pools - Parking Structures and Roof Decks Colour: Grey Shelf Life: 09 months Packaging: 25kg/barrel and 5kg/ barrel
Building materials and construction accessories.Distributor and manufacturer
Construction machine.
Construction and electricity equipment.
Thanks to the ironworker's ingenuity, WROUGHT IRON BALCONY RAILINGS become not only more elegant and unique but also an indispensable part in home architecture. To put a gorgeous iron balustrade like that into your home,
Description by Manufacturer Plastic Patching Clip for scaffolding: Size: D48.6-D52 Color: Yellow, blue Material: PP Packing: 100pcs/ carton, 120pcs/carton Delivery: Ho CHi Minh port, Vietnam OEM / ODM: Customized design are welcome Aplication: The patching clip can be used for sizes D48.6 and D52. For safe protection at site Do not use the product if it is cracked or damaged.
Ceramic and porcelain tiles.
