NUMBER 1 : is a unique chemical treatment for the waterproofing, protection and repair of concrete.
The barrel 5kgs is ideal for small projects.
NUMBER 1 : is the most chemically active product within the Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints, and honeycombs.
NUMBER 1 : prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of the concrete and cement-based materials.
Advantages:
- Less costly to apply than most other methods
- Can be used on damp substrates
- Resists extreme hydrostatic pressure
- Becomes an integral part of the substrate
- Can seal hairline cracks up to 0.4mm
- Allows concrete to breathe
- Chloride-free
- Highly resistant to aggressive chemicals
- Non-toxic
- Does not require a dry surface
- Cannot puncture, tear or come apart at the seams
- No costly surface priming or leveling prior to application
- Does not require protection during backfilling or during placement of steel, wire mesh or other materials
- Not subject to deterioration
- Permanent
Application:
- Reservoirs
- Sewage and Water Treatment Plants
- Underground Vaults
- Secondary Containment Structures
- Foundations
- Tunnels and Subway Systems
- Swimming Pools
- Parking Structures and Roof Decks
Colour: Grey
Shelf Life: 09 months
Packaging: 25kg/barrel and 5kg/ barrel
- one component Water-based acrylic waterproofing materials - Excellent waterproof performance, strong elasticity, adhesion and durability. - Applicable areas * Exterior wall and roof of the building * A place that requires waterproofing of various building such as concrete. - Prevention of penetration of moisture in cracks. - Excellent adhesion to concrete, water resistance . - It's safe to work with eco- friendly products. - It is possible to work on moist construction areas (but less than 30% wet)
DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.
DESCRIPTION CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete. ADVANTAGES * Applied to wet surface * Transparent, non-toxic and odorless * High cohesion and effective against positive/negative water pressure well APPLICATION * The leakage of inner wall in basements or the protection against positive/negative water pressure * Prevent seepage and leakage in underground passages and tunnels * Avoid the leakage of cisterns and pools PACKING 30KG/Set A: 22.5KG in powder.+ B: 7.5KG additive. COLOR Grey and white. STORAGE 6 months in original container stored in dry conditions and under 25°C.
Supplier: Epoxy flooring, pu concrete cementiotious flooring, polyurethane flooring, flooring contractor, epoxy manufacturer, antistatic esd conductive epoxy flooring, epu flooring, waterproofing, chemical resistance flooring.
Buyer: Epoxy resin
Supplier: Aac bricks, concrete blocks, precast concrete products, dry mix mortar products, waterproofing solution
Supplier: Concrete admixture, high range water reducers, super plasticizers, coatings, glues and water-proofing material
Supplier: Concrete waterproofing, crystalline waterproofing, jointing ancillaries, epdm membranes
Supplier: Foam concrete, cellular concrete, pvc waterstops, paints, admixtures, tile adhesive, insulation, waterproofing
Services: Manufacturers
Buyer: Construction material
Supplier: Concrete admixtures, water proofing systems, industrial grouts, anti-corrosive coatings, protective and decorative coatings, concrete repair products, industrial floorings, concrete surface treatments, tile adhesives and joint fillers, joint sealant and vibration pad.
Services: We handle new installations / constructions apart from repair and revamping projects. Our services include:
òconsulting in selection of the right solution and products
òsupply of the materials
òinstallation services and execution
òproject management