Description
VGROUT6 is a non-shrink, pourable cementitious grouting mortar with extended working time to suit local ambient temperatures.
- Excellent flowability
- Good dimensional stability
- High strengths, adjustable consistency
Product name: VGROUT6
Compressive strength: M60 (N/mm2) / 60 Mpa / 8700 psi
Mixing ratio:
- 25kgs powder: 4,0L water
- 5kgs powder: 0,8L water
ADVANTAGES
- Easy to mix and apply
- Flowable consistency (according to mix)
- Rapid strength development
- Non-corrosive
- Non-toxic
- Iron and chloride free
- Shrinkage-compensated
- Good pumping properties
Application
- Where exceptional one day and ultimate compressive strengths are required.
- Applications requiring a pumpable grout.
- Non-shrink grouting of machinery and equipment, base plates sole plates, precast panels, beams, columns and curtain walls.
- Grouting of railing posts, foundations, windmills, compressors, etc.
- For grouting rebar, bolts, dowels and pins, etc
- Applications where a non-shrink grout is needed for maximum effective bearing area to transfer optimum load.
Color: Gray powder
Mixing:
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture
- VGROUT6 25kg barrel required approximately 4.0 litres of clean water
- VGROUT6 5kg barrel required approximately 0.8 litres of clean water
The mixed materials is immediately ready to use and should be used within 30-60 minutes after mixing.
Description:
Fairing Coat Mortar: is one component, polymer modified, cementitous mortar based containing silica fume.
Product name: Fairing Coat Mortar
Compressive Strength: â?¥ 20 Mpa (1 day)
â?¥ 50 Mpa (28 days)
Mixing ratio:
- Approx. 5.5 L of clean water per 25 kgs barrel
- Approx. 1.1 L of clean water per 5 kgs barrel
Layer Thickness: Max. 5mm
Pot Life ~ 30 min. (at 27�ºC / 65% r.h)
Usage:
Fairing Coat Motar: is used as repair mortar for minor surface defects on:
- Concrete
- Mortar
- Stone
Fairing Coat Mortar: is a cosmetic mortar designed to eliminate surface defects due to demoulding, pores or honeycombs, and is suitable forsmall repairs on:
- Precast concrete elements
- Fair-face concrete
- Columns and beams
- As levelling mortar and fairing coat or finishing skim coat to concrete, mortar patches and screeds.
Advantages:
- Ready to use requiring only the addition of water
- Excellent workability
- Rapid strength development
- Good mechanical strength
- Good adhesion to substrate
- No corrosive effect on reinforcement steel
- Non-toxic
Packaging: Barrel 5kgs and Barrel 25kgs
Colour: Powder / Grey
Shelf life: 9 months if stored properly in unopened, original packaging.
Storage conditions: Dry, cool, shaded place
Mixing ratio:
Water : (Fairing Coat Mortar) powder = 1:4.0 (parts by weight)
Approx. 5.5 L of clean water per 25kgs barrel.
Approx. 1.1 L of clean water per 5kgs barrel.
Layer Thickness:
Max. 5mm
Pot Life:
~ 30 min. (at 27�ºC / 65% r.h)
Fairing Coat Mortar: should be mechaically mixed in a clean container using a low-speed electric mixer (max. 500 rpm). A minimum mixing time of 3 minutes is recommended to throughly blends the components.
Fairing Coat Mortar: can be applied by spatula or trowel. Work the mixed mortar well into the substrate. Force material against the edge of the repair, working towards the center.
Curing treatment:
To achieve the full potential of any cement based material, curing is essential. In warm or windy weather, the use of standard curing methods are necessary (use of polyethylene sheets or damp hessian) to prevent premature drying out of mortar.
Cleaning of tools:
Remove non-hardened Products from tools and requipment with water. Hardened material can only be remove mechanically.
Description:
VFLOOR1 is a single component Cementitious Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.
Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Standard primers give excellent bonding to the VFLOOR1 products
Product name VFLOOR1
Compressive strength >40 Mpa, 28 days later
Flexural strength >8 Mpa, 28 days later
Application temperature 5-30 degree
Mixing ratio 20kgs powder + 5.2kgs Liquid
Product name PRIMER
Mixing ratio 2kgs Primer + 2L water + 4kgs cement
Feature & Benefits:
- Single component, just mix with water
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture.
- VFLOOR1 20kgs barrel required approximately 5.2 litres of clean water
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 3 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR1 will appear to be dry after approximately 24 hours.
Floor laying may commence after 48 hours.
Coverage:
- At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.
Sprayed concrete is a fast hardening material for stabilization and support of structures and for concrete applications without using any moulds. Sprayed concrete is an interaction of man, machine and concrete. Man, personified in the work of the nozzleman, requires technical skills and dedication to the job. The operator must be able to rely fully on the machine and the sprayed concrete material. It is the interaction and quality of these components that finally determines the success of the sprayed concrete application Sprayed Concrete has many advantages
Application to any elevations because sprayed concrete adheres immediately and bears its own weight
Can be applied on uneven substrates
Good adhesion to the substrate
Totally flexible configuration of the layer thickness on site
Concreting without formwork
Reinforced sprayed concrete is also possible (mesh/fiber reinforcement)
Rapid load-bearing skin can be achieved without forms or long waiting times.
Sprayed Concrete Applications:
- Excavation stabilization in tunnneling and mining construction
- Slope and trenching stabilization
- Protective lining
- Concrete repair (concrete replacement and strengthening)
- Special lightweight load-bearing structures
- Restoration of historic buildings (stone structures)
- Sealing works
- Construction of swimming pools
User Notes:
The technical details and recommendations contained in this data sheet are given in good faith and represent the best of our knowledge and experience at time of priting. It is the responsibility of the user to ensure that the products are used in accordance with Sprayed Concrete Products instruction.
Consumption:
6 kgs Additives /100 kgs cement
Shelf Life:
Storage in dry conditions, raised above floor level and temperature range of between 5�ºC and 30�ºC. The usable shelf life shall be approximately 9 months.
Safety Data:
As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuff
Packaging: 25kg/barrel
DESCRIPTION:
Stop Leak is a liquid admixture when mixed with portland cement becomes an extremely rapid setting plastic material used to stop pressure leaks in concrete and masonry structures.
USES:
Stop Leak can be used to stop water leaks in dams, foundation walls, manholes, pipelines, underground structures, swimming pools, foundtains, tunnels, basement walls and floors.
ADVANTAGES:
Will stop water under pressure.
ECONOMICAL:
Sets within 60 to 90 seconds, generates minimal heat when setting
Becomes extremely plastic when combined with portland cement
Stop Leak liquid must be stored at temperatures above freezing.
MIXING RATIO:
1Kg Stop Leak : 2,8 kgs cement (2,2 pounds Stop Leak : 6,17 pounds cement)
LIMITATIONS:
Judgment must be used to mix Stop Leak in small quantities due tu the extremely rapid set. After the portland cement is added to the liquid Stop Leak, the mixed compound will set in approximately 60 seconds. This action allows the material to bond mechanically and chemically to saturated surfaces. A delay in setting, if required, can be attained by adding fine sand to the neat cement mixture or by reducing the amount of cement added to the liquid.
Safe
- Odorless, non-toxic, does not affect the health of users and the environment
- Should wear gloves and necessary protective equipment when using
- If splashed into eyes, use clean water or eye drops to wash several times
Storage conditions
Product must be stored in original unopened and undamaged sealed packging in dry conditions.
Colour: Clear liquid
Shelf life
12 months from the production date
Packaging
- Stop Leak 0,5Kg (1,1Pounds)
- Stop Leak 2,5Kg (5,51Pounds)
- Stop Leak 6,5Kg (14,3Pounds)
11081 Construction Household Furnishing Suppliers
Short on time? Let Construction Household Furnishing sellers contact you.
With improved formula, LIX glass cleaner brings shininess,
freshness and pleasant perfume to glass, window, crystal and
other shining hard surfaces.
Size: 650ml
ON1 TOILET CLEANER
- Pine essential oils.
- High quality Toilet cleaner.
- Kill 99.9% of common germs and bacteria.
- Clean and protect ceramic.
- Size: 500g
ON1 TOILET CLEANER
- Pine essential oils.
- High quality Toilet cleaner.
- Kill 99.9% of common germs and bacteria.
- Clean and protect ceramic
- Size: 900G
On1 Multi-Purpose Cleaner is a premium cleaning product with 97% plant-based ingredients that do not cause surface corrosion, helping to clean surfaces quickly.
- 97% plant-based ingredients help remove stains quickly, safe for users' health and do not contain harmful chemicals.
- On1 Multi-Purpose Cleaner with non-abrasive surface protects the surface perfectly, suitable for household appliances, kitchens, bathrooms, motorcycles
Toilet Cleaner On1 is a premium product dedicated to cleaning toilets and bathrooms. The product has been tested to kill 99.9% of bacteria harmful to health.
- With ingredients of pine essential oil, the product brings a pleasant scent to relax when used
- The composition of the product includes a polisher and enamel protectant to help your toilet and bathroom keep its shine like new
White clothes are often easily soiled, especially in places such as collars, wrists or arms, even though you have soaked them in soap and rubbed them thoroughly. As an effective assistant for housewives in washing, Javel bleaching products have the advantage of not only making clothes white as new, but also making fabrics brighter.
» In addition, the product also effectively eliminates bacteria and mold on clothes.
OUTSTANDING FEATURES
- On1 Orange Ginger Essential Oil Dishwasher with a Spa-inspired scent, a combination of natural ingredients and Shining Pro technology, the product will bring you a relaxing and pleasant experience when use.
- Inspired by Spa, On1 Ginger Orange Essential Oil Dishwasher will remove the smell of grease in your kitchen space, giving you a relaxing, pleasant feeling along with a fragrant kitchen space.
- Natural essential oil ingredients help soothe hands thanks to Vitamin E and effectively kill bacteria - eliminate fishy odors
- Shining Pro technology contains mild surfactants to help protect the surface of dishes and maintain their shine like new.
