The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
SPECIFICATIONS Product name: Rectangular Galvanized Wire Mesh Wire Steel Grade: Carbon Steel SAE 1006 to SAE 1010 Wire type: Galvanized Wire Diameter: mm 2.8 (+/- 0.08) Maximum Traction Strength: MPa 485 Minimum Zinc Coat: g/m�² 85 Supply Form: In Rolls Roll Length : 100m (+/- 1) Roll Height : 800 mm (+/- 16) Roll Weight : 42.5 Kg Rectangular Mesh Wide : 170 mm (+/- 5) Rectangular Mesh Height Variable, increasing from lower to upper end Price FOB per 20' container with 200 rolls
Metal scrap like copper scrap, aluminium scrap, car engine scrap, all car parts scrap.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
We are suppliers of BEST QUALITY Copper Wire ScrapAnd Looking for serious buyers in need of our products, contact with us for more details. Copper wire scrap refers to discarded or waste copper wires and cables that are no longer in use and are collected for recycling purposes. These scraps can come from various sources, including industrial processes, construction and demolition sites, electrical and electronic equipment, and more. Copper wire scrap is valuable for recycling because copper is a highly sought-after material due to its excellent electrical conductivity and other useful properties. Here are some key points about copper wire scrap: Collection: Copper wire scrap is collected from various sources where copper wires and cables are no longer needed. This can include old appliances, electronics, discarded wiring, and more. Sorting and Processing: Once collected, the copper wire scrap needs to be sorted and processed. This might involve removing any non-metallic attachments, such as insulation, plastic coatings, or other materials. The goal is to obtain a relatively pure copper material for recycling. Recycling: The sorted copper wire scrap is then typically processed through various recycling methods. One common approach is to chop or shred the scrap into smaller pieces, which are then melted down in furnaces to separate the copper from any remaining impurities or coatings. Refining: After melting, the recovered copper is further refined to ensure its purity. This can involve processes like electrolytic refining, similar to the process used to produce copper cathodes. The result is high-quality copper that can be used for various applications. Applications: The recycled copper obtained from copper wire scrap can be used to produce a wide range of copper-based products. These include new wires and cables, plumbing pipes, electrical components, and more. The recycled copper retains its excellent electrical and thermal conductivity properties, making it valuable for industries that require such characteristics.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
High Grade Aluminum Wire Scrap
Light paraffin oil n60 & n40, white spirit, pvc resin, high purity zircon sand, methanol, base oil, linear alkyl benzene, hdpe, vinyl acetate monome xylene, bitumen | asphalt | tar, ethanol, ammonium nitrate, crude iodine prills, mono propylene glycol, mono ethylene glycol, hexylene glycol, di ethylene glycol,di propylene glycol ,n butyl acetate, methylene chloride, dot 3 brake fluid variations, antifreeze c3053, n butanol, isobutanol, ethyl acrylate,ethyl acetate, caustic soda (sodium hydroxide), caustic potash (potassium hydroxide), butyl acrylate, aluminum sulfate, pure cow ghee, petroleum jelly, urea 46% granular & prilled fertilizer, anhydrous citric acid, boric acid, white spirit, xylene , soda ash dense , copper wire.We export deals in export of paraffin wax, caustic soda, hdpe, ldpe, sunflower oil, copy papers, charcoal, corn, soybeans, beans, used oil, chemicals, fresh fruits, oranges, apples, grapes, pomegranates, chicken, frozen meat, lldpe, pet flakes,
Dry fruits, organic dry nuts, seeds, grains, vegetable oils, sunflower oil, soybean oil, canola oil, animal feeds, scrap metals, copper wire scrap, a4 copy papers. food grade chemicals.
This New Model virtual pinball machine is a big upgrade from a normal virtual pinball machines. Adding real motor shaker inside cabinet to make force feedback when playing games. Full cabinet active LED flasher and strips controlled by game make machine look amazing
Vegetable cooking oil ,sunflower oil,canola oil, sweetened condensed milk,wheat flour, milk powder,sugar ,milk powder ,tomato paste,a4 copy paper ,occ waste paper ,aluminum ingot a7,used cooking oil.Manufacturer, exporter, wholesaler, distributor
Secondary used surplus steel, electrical steel, transformer lamination, crgo, silicon steel cold rolled and hot rolled, seamless steel tubes, steel pipes scrap, transformers scrap, copper scrap, aluminium scrap, aluminium cable, copper cable, bright bars, black bars, shafts, hollow shafts, stainless, brass, wire rope.International trade
The Bard Ventralex Hernia Patch with Strap is a medical device used for hernia repair. Bard, now a part of BD (Becton, Dickinson and Company), is a well-known company that produces a variety of medical devices, including products for hernia repair. Here are some general features and considerations for the Bard Ventralex Hernia Patch with Strap: Hernia Repair: The device is designed for use in hernia repair surgeries. Hernias occur when an organ or tissue protrudes through a weak spot in the surrounding muscle or connective tissue. Mesh Material: The hernia patch typically consists of a mesh material. Meshes used in hernia repair are often made of synthetic materials like polypropylene. Strap: The strap component is an additional feature that may be designed to help secure the mesh in place during the surgical procedure. Placement: Surgeons use the hernia patch to reinforce the weakened area of the abdominal wall, reducing the risk of hernia recurrence. Minimally Invasive Techniques: In some cases, the hernia patch may be used in minimally invasive or laparoscopic hernia repair procedures.
The Bard PerFix Light Plug is a medical device used in hernia repair. Bard is a well-known manufacturer of medical devices, and their hernia repair products include mesh implants designed to reinforce and support weakened or damaged tissue in the abdominal wall. Key features and considerations for the Bard PerFix Light Plug may include: Hernia Repair: The PerFix Light Plug is specifically designed for use in hernia repair procedures. Hernias occur when organs or tissues protrude through a weak spot in the surrounding muscle or connective tissue. Mesh Material: The product is likely made of a mesh material. Meshes used in hernia repair are often constructed from synthetic materials, such as polypropylene. Plug Design: The term "plug" suggests that the device is designed to fill or cover a defect in the abdominal wall associated with a hernia. Lightweight Design: The inclusion of "Light" in the product name may indicate that the mesh is designed to be lightweight while still providing effective support. Surgical Technique: The PerFix Light Plug is used by surgeons during hernia repair procedures to reinforce the tissue and reduce the risk of hernia recurrence.
Bard is a well-known manufacturer of medical devices, including products for hernia repair. Meshes are commonly used in hernia repair procedures to provide support and reinforcement to weakened or damaged tissue in the abdominal wall. Here are some general considerations: Anatomical Design: The term "ANATOMICAL MESH" suggests that the mesh is designed to fit anatomical contours, potentially allowing for better conformity to the patient's anatomy during hernia repair. 3DMAX MID: This part of the name may refer to specific design features or characteristics of the mesh. For example, "3DMAX" might imply a three-dimensional design for optimal support. Mesh Material: Hernia repair meshes are typically made of synthetic materials, such as polypropylene, which is known for its durability and biocompatibility. Surgical Technique: The mesh is used by surgeons during hernia repair procedures to reinforce and support the abdominal wall, reducing the risk of hernia recurrence.
SPECIFICATIONS Product name: Galvanized Link Mesh Wire Steel Grade: Carbon Steel SAE 1006 to SAE 1010 Wire type: Galvanized Wire Diameter: mm 2.8 (± 0.03) Mechanical Resistance MPa: 30 ~ 47 Supply Form: In Rolls Roll Length: 15 m (± 0.25) Roll Height: 1500/1800 mm (± 30) Roll Weight; 46/55 Kg Dimensions Squares: 50mm Prices CTN Price per container Price per roll 2.8x15x1.8 20 $10,600.00 $106.00 40 $21,200.00 $106.00 2.8x15x1.5 20 $8,404.00 $84.04 40 $16,807.99 $84.04 Prices negotiable
I can provide some general information: PTFE Guide Wire: PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications. Medtronic: Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.
