Gfs 1500v glass fused to steel tanks, bolted steel tanks and silos.
All tank and vessel fabrication ASME certified
I respectfully write to inform you that i am in the petroleum trade. We offer wide range of terminaling, packaging, custom manufacturing/processing services and tank farm storage in Houston, Rotterdam, Russia with capacity of 2,6000,000 gallons with truck,rail and marine access.
Top Close Essential Oil Perfume Tank, 100l Essential Oil Tank, Stainless Steel Essential Oil Tank Top Close 100L Essential Oil Perfume Tank is specially used for mixing of liquid such as cosmetics and perfume etc. All control of this mixer machine is pneumatic,no electronic ,so it can work with products that easy explosive or chemicals that can not contact with any electric part. As it is single layer ,so it can not heating and cooling ,however it can be made as double jeckets that can be heated Made of imported SUS304 or SUS316L stainless steel. The mixing tank body and pipe are subjected to mirror polishing. Horsepower 0.5HP Torsion 2.5Nm Inner Diameter of paddle 10.5c Speed 6800r/min Length 80cm Motor brand Taiwan MBP Material of paddle and axle SUS304
Single-layer Stainless Steel Tank, Top Open Water Storage Tank, Fixed Single Layer Stainless Steel Container single-layer stainless steel container top open water storage tankWidely use in foods,dairy products, fruit juice beverages, chemical process, etc. It can be made according to special requirement of customers (double -layer storage tank, movable storage tank, fixed storage tank, pressure storage tank, jacket tank, ferment growing tank, fermentation tank, double-layer side blending tank, horizontal storage tank, square storage tank and so on). Olive oil tank adopt humanized structure design and easy operate, large water tank. 1. Anti-corrosive : our storage tank can stand corrosion of residual chlorine in air and water, we inspect tanks before delivery to ensure top quality. 2. Fine sealed: The compact design and fine sealed will avoid dirty goods in air comes in, thus to ensure liquid in storage tank clean. 3. Scientific water flow design : Sediment in the storage tank will not turn up owing to storage tank special design. 4. No need to water frequently: Wash the storage tank at regular intervals( generally 3 years one time). open sewage valve. The storage tank can be add a jacket for cooling or heating . Storage tanks also can for electric heating or steam heating. Storage tanks and other accessory vessels are used for storing of solvents, chemicals & any type of liquids. caustic soda storage tank, open top stainless steel tank, steel storage containers Stainless steel storage  tank Material: SS304 or SS316L or Duplex stainless or 904L Design Pressure: -1 -10 Bar (g) or ATM B9 Work Temperature: 0-200 °C Volumes: 100~30000L Construction : Vertical type or Horizontal type Jacket type  : Dimple jacket, full jacket, or coil jacket Structure  : Single layer vessel, vessel with jacket, vessel with jacket and insulation Heating or cooling function According to the heating or cooling requirement ,the tank will have jacket for requried function Opitional Motor: ABB, Siemens, SEW or Chinese brand Surface Finish: Mirror Polish or Matt polish or Acid wash&pickling or 2B Standard components : Manhole,sight glass , cleaning ball
Automatic Filling Shampoo Machine For Liquid,Automatic Lotion Hair Conditioner Filling Machine,Shampoo Filling Machine It is suitable filling cream, paste and viscosity liquid in cosmetic, food, beverages, medicine. Depends on the different products and various filling requests of the customers, for example, high viscosity or sticky cream, paste, such as, tomato paste, ketchup, jam, sauce, butter, chocolate paste, cosmetics cream, etc., low viscosity liquid products, such as, juice, beverage, shampoo, lotion, laundry detergent, dish detergent, wine, soybean sauce, vinegar, edible oil, cooking oil, drinking water, etc., and liquid chemical products, liquid pesticide, liquid fertilizer, liquid medicine, etc., Our company can design and produce suitable filling machines with matched filling system, such as, underflow pump, free-flow pump, flow-meter pump, piston pump, gear pump, screw pump, peristaltic pump, ceramic pump, electric weighs, etc., and depends on the filling volumes and production amount, the filling machines can be equipped with 1, 2, 4, 6, 8, 10, 12, 16 filling nozzles. The operation system with advanced PLC+ touch screen, electrical and pneumatic components can be with good quality domestic brands, joint-venture brands and imported brands, such as, WEINVIEW, SIEMENS, SCHNEIDER, MITSUBISHI, PANASONIC, AIRTAC, etc., The parts contact with products are made of high class SUS 304, SUS 316 and SUS 316L. Sanitary comply with GMP standard. The machines with reasonable structure, advanced technology, high precision filling, stable performances, simple and easy operation, can be used independently, and can alsoequipped with automatic bottles unscrumbler, automatic stopper pressing machine, automatic caps screwing machine, automatic caps crimping machine, automatic bottles sealing machine,automatic date/batch codes printer, automatic carton/box loading machine, to be automatic filling production line. With high automation degree, finished products with high qualified ratio, significantly saving manpower cost. Model No TPAF Series Name Automatic Multi Heads Liquid  Filling Machine Automatic Shampoo Filling Machine Automatic Lotion Filling Machine Automatic Liquid Detergent Filling Machine Automatic Laundry Detergent Filling Machine Automatic Liquid Soap Filling Machine Automatic Liquid Products Filler Filling Heads / nozzles Amount 2 4 6 8 10 12 16 Filling dosage 5-50ml, 50-500ml, 100-1000ml, 500-5000ml Hopper Capacity 50L--150L Filling Speed 1000-5000B/H (Depends on the filling heads amount of the filling machine, and the filling volume ) Accuracy ± 1.0%(on the base of 1000ml) Control system PLC & Touch screen Power supply AC220V 50Hz 1phase/AC380V 50HZ 3phase Air consumption 0.3-0 .7 Mpa      G.W. 450KG--1200KG Power 0.5KW--2.0KW Dimension customized
Manual Filling Machine For Soap, Disinfection Water Filler, Double Pump Gear Filling Machine Magnetic Pump acetone filling machine, Disinfection water wine filler automatic ink filling machine with 2 nozzles 2L/min Almost all the good flow of liquid, particularly suitable for sanitary conditions require very high nutrient solution, biological agents, chemicals and pollution, toxic, corrosive liquid 1. Using world brand variable voltage and variable frequency,include imported high accuracy many ring potentiometer and lock panel to adjust filling volume more stable and accurate.filling error 1% 2. Japan imported magnetic gear made of stainless steel pump, reliable quality and long life. 3. stainless steel machine body,endurable 4. Take small place and easy to operate. 5. Easy to clean 6. Own manual and auto function,also can equip online using. 7. Standard type:single head electric filling machine,double pump gear filling machine and four pump type. 8. Only can fill liquid product without granual. 9. The filling volume from 5ml to  5000ml adjustable. and the max filling speed  is about 5000ml/min.Easy to operate and control. Notice item: a. Check valves must be vertical downward, otherwise affect accuracy b.filling head must be vertical downward,otherwise affect leakage material. c. Line corner should not be too small, or affect flow and accuracy. d. Raw material barrel liquid height difference should not be too big, otherwise affect accuracy. e. Volatile liquid please use in the circulation of air environment. f. Unfavorable use together with high frequency wave machine g. Unfavorable use together with big load equipment. h. Filling special liquid must inform the factory to meet the different feeding and discharge tube. Product name TMFM-01S Filling range 0.5ml-3000ml(adjustable) Filling speed 20-40 times/min Filling precision ±0.5% Filling nozzle size 4mm&6mm(outer diameter, can be customized) Power 80W Dimensions 400*360*270mm Net weight 7.5KG
Par 4600l Frequency 40 khz Ultrasonic power 600w Capacity 30l Time control 1-30 minutes Net weight 13kg Tank dimensions 500 x 300 x 200 mm (l*w*h) Packaging size 657 x 452 x 505 mm (l*w*h) Power ac 220-240v, 50/60 hz Power ac 110-120v, 50/60 hz Packing: 1pcs/ctn Heating power 400w
Part 3240l 11 liter tank Frequency 40/80/120 khz Ultrasonic power 240w Capacity 11l Time control 1-30 minutes Net weight 6.9kg Tank dimensions 300 x 240 x 150 mm (l*w*h) Packaging size 412 x 357 x 380 mm (l*w*h) Power ac 220-240v, 50/60 hz Power ac 110-120v, 50/60 hz Packing: 1pcs/ctn Heating power 300w
Part 3360 Frequency 40/80/120 khz Ultrasonic power 360w Capacity 20l Time control 1-30 minutes Net weight 9.8 kg Gross weight 11.8 kg Tank dimensions 330 x 300 x 200 mm (l*w*h) Packaging size 472 x 437 x 470 mm (l*w*h) Power ac 220-240v, 50/60 hz Power ac 110-120v, 50/60 hz Packing: 1pcs/ctn Heating power 400w
Part 3600l Frequency 40/80/120 khz Ultrasonic power 600w Capacity 30l Time control 1-30 minutes Net weight 13 kg Gross weight 15.8 kg Tank dimensions 500 x 300 x 200 mm (l*w*h) Packaging size 657 x 452 x 505 mm (l*w*h) Power ac 220-240v, 50/60 hz Power ac 110-120v, 50/60 hz Packing: 1pcs/ctn Heating power 400w
Features: includes computer interface with software Reads cavitation energy in watts db/m Detect standing waves Detect malfunctioning transducers Discover areas blocked to ultrasonics Profile tanks Adjust power intensity for each tank Monitor ultrasonic tanks for correct operation Works on 20 / 40 / 80 / 120 / 170 / 200 / 300 khz The model l-2000 ultrasonic power meter consist of a b precision model 5390 true rms dvm, a coaxial adaptor and a q-1000 quartz probe. The meter has been pre calibrated at the factory and is accompanied by a calibration certificate.
Includes probe dia.] Includes interface electronics for computer Includes software for your computer Attaches to usb port Display wave form on oscilloscope Display frequency on spectrogram Display power level in rms, peak to peak & db/watts per cm2 Record all displays as files Transient recorder for tracking process Lap top computer compatible Map power levels in tank Check effect of baskets on work load Check transducers for operation Check effects of filtration on ultrasonic power Check power intensity levels between tanks The l-2001 software displays the following information: A. Wave form; the ultrasonic wave form is displayed on an on screen oscilloscope B. Frequency; the frequency [major and secondary] are displayed along with relative power on the spectrogram screen. A set of cursors may be placed on the screen and a small box will show the relative frequency and strength of that frequency. C. Power; the voltage meter screen has three windows that will show the rms of the ultrasonic power, the peak to peak power, and the power expressed in db/m watts. All three of the readings are displayed at the same time. D. Transient recorder; the transient recorder will allow you to make a continuous record of the power in the tank over a long period of time. E. The oscilloscope, spectrogram, and power meter readings may be saved as files and recalled and played for later analysis F. You may display the oscilloscope, spectrogram and voltage meter all at the same time. The transient recorder operates separately. G. Information on power levels may be imported to a spreadsheet for graphic analysis. H. Screen shots may be saved as jpeg files and all files and screen shots can be annotated with on screen comments. I. All data files may be recalled and placed in comparison mode for comparison to new readings
The di-160 ar produces up to 160 gallons per 24 hours of 17-18 meg ohm water for ultrasonic cleaning and lab use. . The system includes a pre-filter module, main ro filter module, resin filter module and a 50 gallon storage tank with auto shut off on fill and an entirely separate re-circulation filter system. The system is fully instrumented with a dual channel tds meter on the ro module and a digital resistivity meter with alarm on the recirculating module. The entire system is mounted in a 5' x 5' x 2.5" console that includes a small sink and a lab faucet. The console is mounted on 4 casters [ 2 locking] for easy mobility power requirements are all 24 v ac at the water level.
The di 160 is a wall mount di system with a 5 gallon container for di water. The system has a dual channel tds meter and an auto shut of on container fill. It has a pre filter, main ro filter and three resin filters.
Part # 4240l Frequency 40 khz Ultrasonic power 240w Capacity 11l Time control 1-30 minutes Net weight 6.9kg Tank dimensions 300 x 240 x 150 mm (l*w*h) Packaging size 412 x 357 x 380 mm (l*w*h) Power ac 220-240v, 50/60 hz Power ac 110-120v, 50/60 hz Packing: 1pcs/ctn Heating power 300w
Part 4360l Frequency 40 khz Ultrasonic power 360w Capacity 20l Time control 1-30 minutes Net weight 9.8kg Tank dimensions 330 x 300 x 200 mm (l*w*h) Packaging size 472 x 437 x 470 mm (l*w*h) Power ac 220-240v, 50/60 hz Power ac 110-120v, 50/60 hz Packing: 1pcs/ctn Heating power 400w
Di 500-ar /18 meg ohm di system Up to 500 gallons of 17< meg ohm di water per 24 hrs Pre filter, ro filter, di resin filter, recirculation polish filter Digital dual chanel tds meter on ro system Tin lined swivel faucet with sink in deck Digital resistivity meter with alarm 100 gallon di tank with recirculation pump uvand dual 20" resin filters High and low level switches on di tank Front mounted controls Auto level control in sump Pressure gauge on ro system Booster pump on ro system Pressure gauge on di loop Uv filter on di recirculation polish filters Loop system for up to 25 take off points System is mounted in an epoxy coated steel frame with containment deck Options: Remote control panel Point of use filters and faucets for installation in hoods Pressure regulator for take off point pressure control
Glass fused to steel (GFS) tanks are a type of bolted storage tank made from two materials: glass and steel. High strength TRS (titanium rich steel) plates and enamels are perfectly fused at high temperatures to form a highly inert inorganic glaze layer. This coating system has excellent anti-corrosion properties and is the best choice for tank and silo. YHR Tanks, as an experienced glass-fused-to-steel tank manufacturer , has consistently concentrated on the research and production of glass-fused bolted steel tanks since the mid-1990s. After over two decades of continuous dedication, our Glass fused to steel water tanks have found extensive applications in domestic municipal, environmental protection, aquaculture, and various other fields. Additionally, they have been exported to international markets. TYPES OF GLASS FUSED TO STEEL BOLTED TANKS USES OF GLASS FUSED TO STEEL TANKS Uses of Glass Fused To Steel Tanks Glass fused bolted steel tanks find extensive applications across various industries, serving diverse purposes in different settings. These tanks are notably utilized in: Water Treatment Plants Wastewater Treatment Plants Biogas Plants Agriculture Food Processing Plants, and more. Renowned for their extended service life and minimal maintenance requirements owing to corrosion resistance and UV stability, glass-fused tanks cater to municipal, industrial, and agricultural needs. Their exceptional corrosion resistance, durability, and easy maintenance features make them highly suitable for the storage and processing of a wide range of liquids, chemicals, and gases. Additionally, these glass fused bolted steel tanks are employed for rainwater harvesting, firefighting, and the storage of various industrial liquids.
Less influenced by local weather Possible to relocate, expand and reuse Beautiful appearance APPLICATIONS GFS-900V GLASS FUSED TO STEEL TANKS Farm Digesters Using Agricultural Waste Farm Digesters using any other Waste Streams Edible / vegetable Oils Dry Bulk Solids Fire Water Potable Water Municipal Sludge Cake Storage Farm Digesters Municipal Sludge Storage Municipal Sludge Treatment INSTALLATION INSTALLATION OF GLASS FUSED BOLTED STEEL TANKS YHR Tanks, as one of the leading glass lined steel tank manufacturers in China, not only provides high-quality glass lined water storage tanks but also offer installation services. The installation process of Glass Lined Steel Tanks prioritizes foundation stability to securely support the tank body and stored products. Here are the installation steps: Preparation Phase: Clean and level the installation site. Apply a foundation of sand or crushed stone, followed by constructing a circular concrete wall or pad. It's better that the foundation work can be completed before tank delivery. Construction Phase: Erect tank panels layer by layer from the bottom up. Ensure clean, dry steel plates during bonding and promptly replace any loose bolts. Secure the bottom layer to the foundation with reinforcement bars. Assemble subsequent layers, connecting them with a jack and installing wind braces for stability. Add necessary accessories like valves and doors, and install the tank roof. Testing and Maintenance: Conduct a leak test post-assembly to verify tank integrity and safety. Regular maintenance, including inspections, cleaning, leak monitoring, and damage checks, is vital to prolong the glass coated steel tanks' lifespan and ensure proper functionality. Glass fused bolted steel tanks offer advantages over traditional storage solutions, including rapid installation, reduced transportation costs, and the ability to assemble in various weather conditions, minimizing weather-related delays. For more information about bolted water storage tanks, please feel free to contact us!
