Model L2000 Ultrasonic Probe

Includes probe dia.] Includes interface electronics for computer Includes software for your computer Attaches to usb port Display wave form on oscilloscope Display frequency on spectrogram Display power level in rms, peak to peak & db/watts per cm2 Record all displays as files Transient recorder for tracking process Lap top computer compatible Map power levels in tank Check effect of baskets on work load Check transducers for operation Check effects of filtration on ultrasonic power Check power intensity levels between tanks The l-2001 software displays the following information: A. Wave form; the ultrasonic wave form is displayed on an on screen oscilloscope B. Frequency; the frequency [major and secondary] are displayed along with relative power on the spectrogram screen. A set of cursors may be placed on the screen and a small box will show the relative frequency and strength of that frequency. C. Power; the voltage meter screen has three windows that will show the rms of the ultrasonic power, the peak to peak power, and the power expressed in db/m watts. All three of the readings are displayed at the same time. D. Transient recorder; the transient recorder will allow you to make a continuous record of the power in the tank over a long period of time. E. The oscilloscope, spectrogram, and power meter readings may be saved as files and recalled and played for later analysis F. You may display the oscilloscope, spectrogram and voltage meter all at the same time. The transient recorder operates separately. G. Information on power levels may be imported to a spreadsheet for graphic analysis. H. Screen shots may be saved as jpeg files and all files and screen shots can be annotated with on screen comments. I. All data files may be recalled and placed in comparison mode for comparison to new readings

Name: water-based varnish (self-adhesive) Model: H-5803C Use: for in-line printing , wet to wet printing , self-adhesive , for noodles package . Description: H-5803C is a plus by a special acrylic polymer emulsion with functional additives varnish, It has strong adhesion for the paper after it was hot of the Ultrasonic heating. This varnish has excellent gloss, good gloss and color retention, dry fast, good printability. The wet-wet and wet-dry printing has good wetting leveling, strong anti-alcohol ,printing machine is easy to clean. Dedicated to the noodles package(such as Master), which need ultrasonic to glue Automatic .This varnish is used off-line coating, can also be used for inline coating. Appearance: milky white liquid, Solid content 40%, Viscosity (seconds): 18 ~ 20, (3 cup, 25 ), Gloss: 55 5 Notes: 1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity. 2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow . 3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m. 4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 . 5, Take 12 hours after polishing of the varnish in order to achieve optimal performance. 6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean. 7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive. Package: 25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.