What is a grain cleaning machine? Grain cleaning machines, also known as winnowers, have been used for a long time. They are applied to separate the grains from the chaff, as well as to calibrate the seeds, that is, to separate them by weight and size. The first winnowers worked owing to vibration? the uncleaned grain was shaken and cleaned of the chaff, and the built-in fan blew them away. This design appeared at the beginning of the fourteenth century and remained practically unchanged up to the present day, however, so-called aerodynamic separators are now available on the market, which operate on a completely different principle. After the uncleaned grains enter the separator, they fall into a powerful airflow which is generated by an impeller. Air instantly blows off light impurities, chaff, straw, dust, husks and bad seeds, and quality grain continues to fall and is calibrated. Heavy impurities like stones fall straight down, and the grains are blown away and fall into different chambers, depending on the weight and structure. Thus, the grain is calibrated and divided into: seed material forage; food raw materials, etc. The use of air for grain processing enables to accelerate significantly the cleaning process and make it more qualitative. The germination capacity of the seed material obtained with aerodynamic grain cleaning machines reaches 98%. Our production Our catalog offers you a wide range of grain cleaning machines. The innovative Agromash products are in demand not only in Ukraine, but also in a number of European Union countries. We can name seven reasons why you should buy a grain cleaning machine in our store: The aerodynamic separator is able to work with any type of grain crops. You may fill wheat, peas, flax, soy, barley, coffee, sunflower seeds, chickpeas, lentils and even frozen berries into it ? the output will yield a quality, pure seed material. With the use of our grain cleaning machines, it is possible to recycle wastes from typical grain separators, obtaining up to 30% of good seeds suitable for sowing. Vibration in typical separators damages a significant part of seeds, making them unsuitable for sowing and causing losses. Air flow provides softer cleaning of the grains without damaging them and ensuring high germination of seed material. Agromash aerodynamic separators have low power consumption compared to typical vibration models. This enables to save significantly the electricity. If you purchase our grain cleaning machines, you can work with contaminated and humid material.
CHOCOLATE TEMPERING MACHINES The model range consists of the machines with capacity 250 kg/h, 500 kg/h, 750 kg/h, 1000 kg/h and 1500 kg/h. Designed for tempering of chocolate masses on the basis of cocoa butter or fats-equivalents for production of confectionery products in the composition of the production lines. The machine presents in itself the disk heat exchanger of the continuous type. The standard version of the machine includes three independent tempering zones and additional zone used to keep the specified temperature in the feeding pipe. The machines with a capacity starting from 500 kg/h have an additional zone to stabilize the temperature of the product before the beginning of the tempering process. Heat exchange efficiency and proper organization of the tempering process, plus a large experience in the production of these machines give 100% quality result, which allows to achieve short cooling time, a glossy finish products, good texture of chocolate, crisp break, long preservation of quality.
Drier VS-10 is designed to dry and parch cereal crop grains and finished cereals. The delivery set includes a cooling tower.
Steamer PZ-4 is designed for cereal crops hydrothermal treatment to improve grain process properties and useful qualities of the finished product.
Steamer PZ-3 is designed to cook cereals and grains, as well as other bulk products under the saturated steam overpressure and continuous product stirring with a stirrer.
Steamer PZ-1 is designed for cereal crops hydrothermal treatment to improve grain process properties and useful qualities of the finished product.
Steamer PZ-2 is designed for cereal crops hydrothermal treatment to improve grain process properties and useful qualities of the finished product.
The mill is designed for grinding grains, chaffy, bean, corn, grain mix, oil cake, mill cake and other raw materials, except mineral ones. The mills are installed at the feedstuff plants. Technical specifications: Rotor speed, RPM 3000 Capacity, barley grinding, t/hour, min: 4th group size (sieve 6,5) 6,5 3rd group size (sieve 5) 4,5 2nd group size (sieve 3) 2,5 Installed power, kW 45
Agricultural machineries. 100kg.
Applications: designed for delivering treated water (feedwater) at the pumping temperature of up to 438К ted, nsure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication (with forced lubrication from a pressure lubrication installation for the pump pe 270-150). The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise (clockwise in case of pe 270-150), if viewed from the drive side. Pump designation: first number indicates the capacity, m3/h; the second number indicates the head, kgf/cm2.
Separator provides cleaning and calibrating of all known types of seeds, namely: Wheat, Barley, Oats, Millet, Sunflower, Corn, Pea, Mustard, Rice, Soya, Sorghum, Vetch, Lupine, Cumin, Flax, Rape, Buckwheat, Herb seeds, Vegetable seeds, Watermelons seeds, Bean seeds and so on. Also separator can clean and calibrate all known bulks with diameter up to 15 mm, there were experiments carried out on such materials: Road Metal, Granite Crumb, Pebbles, Marble aggregate, Abrasive material, Zeolite, Montons and so on
Low prices! We produce parts for you according to your drawings. Fast and on time. Swiss Bystronic equipment. Order dates of your items! Standard Lot Size
Welcome to the online store of spare parts for import agricultural machinery manufactured by Zetta Group. Our company is engaged in the production of parts from metals and solid polymers for imported agricultural machinery. We always have in stock parts of our own production for the following brands: Claas, Geringhoff, John Deer, Case, New Holland, Fantini, Lemken, Oros, Gaspardo and other world brands. If among the wide range of spare parts for agricultural machinery in our warehouse there is no part you need, you may order its production according to the sample or under the catalog number. We only sell parts that we make ourselves.
Egg layer Chicken fooder percentage of ingredients: Wheat - 31,07% Corn - 20,00% Wheat brans - 10,00% Short Sunflower - 12,66% Soyaâ??s short - 12,46% Piscine (fish ) meal - 1,00% Blood cells - 0,49% Sunflower oil - 1,50% Threecaltsium phosphate - 1,56% Sodium chloride - 0,22% Chalkstone - 8,00% DL- metionin - 0,04% Aminovitan BR 2 - 1,00% Quality Index: Exchange Value k/cal - 271 Wet protein - 17 Wet gluten -5,00 Calcium -3,60 Phosphorus - 0,60 Sodiumchlorine - 0,30 Lysine - 0,78 Methionine - Cystine - 0,60 Methionine - 0,34
For milk producing cattle Ingredients in percentage Wheat - 10.00% Wheat brans - 40.00% Short Sunflower - 25.00% Sodium chloride - 1.50% Chalkstone - 1.00% Aminovitan DOL - 0.50% Grindasim - 0,05% Barley - 19.95% Fodder Yeast - 2,00% QUALiTY INDEX: Exchange energy Ð?joule /kg - 11,35 Fodder units in 100 kg - 114.44 Wet protein - 17.83 Wet gluten - 8.84 Calcium - 0.54 Phosphorus - 0.72 Sodiumchlorine - 1.48
Comfortable bean bags
1.Black painted shovel - 20*30*40 cm Metal thickness - 2 mm Weight of the shovelÆs head û 0.92 kg 2. Black painted shovel û 25*25*38 cm Metal thickness - 2 mm Weight of the shovelÆs head û 1.06kg 3. Rakes: 9 teeth - width û 32 cm Tooth length - 6.5 cm Metal thickness û 2mm Weight of the rake without handle û 0.48 kg 4. Rakes: 12 teeth - width û 42 cm Tooth length - 6.5 cm Metal thickness û 2mm Weight of the rake without handle û 0.52 kg
We manufacture the Wooden handles for shovels and brooms of the following diameters: 1) 22 mm - with one end rounded and the other with screw end (or cone shape) 2) 24 mm - with one end rounded and the other with screw end (or cone shape) 3) 25 mm - with one end rounded and the other with cone shape. 4) 28 mm - with one end rounded and the other with cone shape. 5) 35 mm - with one end rounded and the other with cone shape. 6) 35 mm - with one end rounded and the other with cone shape. - We can manufacture wooden handles to your exact specifications.
Shovel - American
Shovel - Bayonet
