Product Introduction Metal porous titanium plates are primarily used in standard PEM electrolyzer single cells and stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. . Electrolyzer hardwares cannot use carbon-based gas diffusion layers (GDLs) at the anode because the carbon will immediately oxidize to CO2 (if the medium is acidic) or carbonate ions (if the medium is basic) during the reaction. Porous titanium plates are an excellent option for a diffusion medium in various applications, including electrolyzers and fuel cells. TOPTITECH�´s porous metal gas diffusion layers are the top choice for achieving high performance in these applications. The uniform porosity, strength, and corrosion resistance outperform other diffusion layer productsTOPTITECH substrates are available in a variety of alloys to support a full range of fuel cell operating temperatures, and can be coated with surface treatments or catalyst layers to enchance performance. In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer? Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer. Parameters Place of origin: Baoji, China Brand: TOPTITECH Filtration precision:0.2um-100um Material: titanium Working temperature 300 Length: 30-1000mm(More than 1000mm can be welded) Thickness: 0.5mm
Product Introduction The Porous titanium round plate Diffusion Layer Hydrogen Electrode is made from a porous titanium material that allows the hydrogen gas to diffuse through the material and collect at the surface of the electrode. This diffusion layer helps to increase the efficiency of the hydrogen generator, as it allows for a greater surface area of the electrode to be exposed to the electrolyte, which in turn increases the amount of hydrogen that can be generated. Parameters Filtration precision: 0.45um 80um Application: The hydrogen industry, Hydrogen Fuel Cell industry, instruments, apparatus, etc. Temperature resistance:300 (wet) Sheet dimension range:0.8-2.5mm Thickness x
Product Introduction The sintered corrugated plate is a corrugated plate made by the powder metallurgy process. It is usually made of metal or alloy powder through mixing, pressing, sintering, and other processes, and has excellent properties such as high strength, corrosion resistance, and high-temperature resistance. The manufacturing process of powder-sintered corrugated board is relatively simple, and can be customized according to specific needs, with high material utilization and production efficiency. At the same time, its corrugated shape can increase its surface area and channel length, improving its filtration and separation efficiency. In the fields of chemical industry and petroleum, the powder-sintered corrugated plate has become a kind of necessary filtration and separation equipment. In applying titanium sintered corrugated plate and ordinary titanium sintered plate in the electrolytic cell, titanium sintered corrugated plate has some advantages over ordinary titanium sintered plate. First, the corrugated shape of the titanium sintered corrugated plate can increase its surface area and channel length, which helps to improve the efficiency and yield of the electrolysis reaction. Secondly, the titanium sintered corrugated plate can improve the fluidity and mixing of the electrolytic cell, which is beneficial to the electrolyte�´s uniform distribution and the reaction product�´s rapid discharge. The corrugated structure on the surface of the titanium sintered corrugated plate can indeed increase the electrode surface area, increase the current transfer efficiency, and thus improve the electrolysis efficiency. In addition, it can also increase the mechanical strength and stability of the electrode, reduce the electrode�´s deformation and damage, prolong the electrode�´s service life, and reduce the maintenance cost. Therefore, the corrugated structure on the surface of titanium sintered corrugated plate has important application value in electrochemistry, but it does not directly affect the conductivity in the electrolyte solution. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer´s designated place without damage.
Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
Product Introduction A porous titanium plate is a type of material made from titanium that has many small holes or pores throughout its surface. These pores can range in size from a few micrometers to several millimeters, depending on the manufacturing process and the intended use of the plate. Porous titanium plates are commonly used in a variety of applications, includingbiomedical implants, filtration systems, and catalytic converters. One of their most important properties is their high surface area-to-volume ratio, which allows for efficient mass transfer and gas exchange. Parameters Material: titanium sponge Porosity: 35% Filtration rate: 0.22mm- 100mm Thickness: above 1mm Size: square round and customized with the drawing How is the porosity of the plate controlled during manufacturing The porosity of aporous titaniumplate can be controlled during the manufacturing process. In the powder sintering process,titanium powderis compressed and heated to a temperature just below the melting point of titanium. The powder particles then fuse together to form a solid plate with a controlled porosity. The porosity of the plate can be controlled by adjusting the size and shape of the powder particles, the temperature and pressure of thesintering process, and the amount of binder material used.
Product Introduction Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1 3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories.
Product Introduction As a new type of green energy, hydrogen energy is a new type of green energy, and its sustainable manufacturing has become the goal of the industry. Water electrolysis hydrogen production, hydrogen generators, etc., hydrogen energy equipment emerge in endlessly, and relatively safe and efficient hydrogen production consumables have become a relative key. Porous titanium plate, made of pure titanium, Gr1 grade, non-toxic, safe, naturally bonded after high temperature sintering, relatively uniform pore size, no impurities, good air permeability, high-efficiency reaction, high hydrogen production efficiency, and become an efficient auxiliary part of hydrogen energy equipment. Product parameters Brand: TOPTITECH Material: Gr1 Shape: Rectangular Applicable object: electrolyzer Thickness: 0.8-2.0mm Specifications: can be customized Mesh: 1000 mesh/inch Filtration accuracy: 20 microns Type: Efficient Performance: acid resistance; alkali resistance; high temperature resistance Uses: water, gas, liquid Features 1. Precise air permeability, uniform air holes, certain mechanical strength, high adaptability for external processing; 2. High-purity raw materials, resistant to various acid and alkali environments, a corrosion-resistant material; 3. The porosity can reach 35%, which is a relatively high-strength product in a breathable material and can bear pressure; 4. It can withstand a certain temperature, for example, it can be used normally in a long-term heating environment within 300 degrees. Process The pure titanium powder is pressed into a plate shape, and then sintered in a high-temperature vacuum sintering furnace. The particles are naturally bonded to form a plate shape, and then cooled to form a plate base material, which can then be cut into the desired shape. The pore morphology was observed by means of metallographic microscopy, the pore size distribution was determined by mathematical statistics, and the compression properties were measured by compression tests.
Product Introduction Titanium mesh (titanium plate stretched mesh) is also called titanium rhombus mesh. Using the most recent technology, it is constructed from the original steel plate by cutting and extending. Its mesh body is more lightweight and capable of supporting more weight. Due to the difficulty in drawing titanium wires, the thinnest titanium wires that are relatively skilled in drawing can reach 0.1mm. Titanium wires have low elongation, high strength, high elasticity, and low flexibility. The chemical liquid filter made of titanium mesh can withstand the test of high temperature and high humidity. Titanium mesh can be used to manufacture demister mesh, demister, titanium mesh packing, filter mesh, and titanium filter cartridge and filter column can be manufactured by combined welding. Titanium mesh is primarily utilized for gas, liquid, and other media separation as well as screening and filtration in environments with acid and alkali. Product parameters Material: titanium plate Hole type: rhombus, hexagon, etc. according to customer requirements Plate thickness: 0.1-10mm Mesh: 0.5*112 36485*1010*2020*5025*5030*6040*80 50*100 customized Size: According to customer requirements Features It has no rust, beautiful color, gorgeous color, beautiful appearance, strong and durable, high quality, high-grade High characteristics, smooth mesh surface, uniform mesh, titanium mesh produced by machining, the shape of the hole is diamond-shaped hole, large opening rate, large surface area, high strength Applications As a mud net in the petroleum industry, as a sieve filter, for electroplating in the chemical fiber industry, and in the mining, petroleum, chemical, food, pharmaceutical, machinery manufacturing, and other industries, it is used for screening and filtering under acidic and alkaline environmental conditions. Introduction to related terms Short Pitch: The distance between the node centers along the short diamond diagonal. Long Pitch: The distance between the node centers along the long rhombus diagonal.Wire stem width: The side stem width of the diamond-shaped hole in the expanded metal mesh is the length of the metal plate used to make a wire stem. Plate thickness: the thickness of the original steel plate. Contact Us TEL: +8619992203758 FAX: 0917-3873009 Email:karrykang@bjygti.com Company: TOPTITECH -- BAOJI YINGGAOCO., LTD Website:https://www.toptitech.com/ ADD: No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China
Porous titanium plate is a type of material that is characterized by its interconnected network of pores. It is made from titanium, which is a lightweight, strong, and corrosion-resistant metal. The porosity of the titanium plate allows for increased surface area, which can be useful in applications such as filtration, catalysis, and biomedical implants. Product Parameters Brand: TOPTITECH Porosity: 30-40% Filtration rate: 1um-50um Temperature: â?¤300â?? Size: Customized Porous titanium plate has several features that make it a unique material. First, the pore size and distribution can be controlled during manufacturing, allowing for customization of the material for specific applications. The interconnected network of pores also allows for fluid or gas flow through the material, making it useful for filtration and catalysis. Porous titanium plate is also biocompatible, which makes it suitable for use in biomedical applications. Porous titanium plate has a wide range of applications in various industries. In biomedical applications, it is commonly used for bone implants, where the porous structure allows for better integration with surrounding bone tissue. It is also used in dental implants, where the porous structure allows for better anchoring of the implant. In the chemical industry, porous titanium plate is used for catalysis, where the high surface area and pore structure allow for efficient chemical reactions. It is also used in filtration applications, such as air and water filters. Porous titanium plate can be manufactured using several techniques, including powder metallurgy, sintering, and electrochemical deposition. In powder metallurgy, titanium powder is mixed with a binder material and then pressed into a desired shape. The material is then sintered to remove the binder and fuse the titanium particles together. In electrochemical deposition, a layer of titanium is deposited onto a substrate using an electrochemical process. The resulting layer can be made porous by controlling the deposition parameters.
The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, formed by pressing the mold and sintered at high temperature in a vacuum. Product Parameters Filtration accuracy: 0.5um-50um Porosity: 30-40% Permeability: 3-800m3/m2hkPa Compressive strength: 2-3Mpa Temperature resistance: 300â?? Maximum working pressure difference: 0.6Mpa Features 1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good; 2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance; 3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life; 4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use; 5. Easy maintenance, good assembly, can be welded, bonded and machined; 6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment; 7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments.
Product Introduction In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high-temperature resistance, and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m~65m Material: Pure titanium Operating Temperature: 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high-temperature resistance, breathable Features 1. Corrosion resistance 2. Porous air permeability 3. High conductivity 4. High thermal conductivity 5. Good permeability Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material sweat to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate and poison, etc. (3) Impregnated with anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity: The porosity of the PTL porous titanium sintered plate is an important parameter that determines the surface area available for the hydrogen production reaction. Typically, PTL plates have a porosity of around 30-50%, which provides a large surface area for efficient hydrogen production. 2.Pore size: The size of the pores in the PTL plate can also affect the efficiency of the hydrogen production reaction. Generally, PTL plates have pore sizes ranging from 1um to 100um, depending on the specific application. 3.Thickness: The thickness of the PTL plate can vary depending on the design of the hydrogen production electrolyzer. TopTiTech can customized the thickness from 1mm to 3mm. 4.Catalyst loading: The amount and type of catalyst material used to coat the PTL plate can also affect the efficiency of the hydrogen production reaction. Typically, platinum or iridium catalysts are used, with loading levels ranging from a few micrograms per square centimeter to several milligrams per square centimeter.
Product Introduction Pure titanium ingots and alloy ingots are both found in titanium ingots, which are made by melting and casting mostly titanium sponges. Due to their uniform composition, consistent quality, and availability of large-sized ingots, large-sized pure titanium ingots, which are generated using electron beam melting, in particular, significantly contribute to advances in product quality and productivity. Titanium ingot can be used in consumer goods, medical implants, artificial bones, ship hulls, bridges, chemical equipment parts (reactors, pipelines, heat exchangers, and valves, among other things), aviation engines and parts, and chemical equipment. Products information Titanium and titanium alloy ingot is the product name. Size: 380mm-960mm (15"-37.8") in diameter, 2000mm-3000mm in length (78.7"-118") Material: Grades 1, 2, 4, 5, 7, 9, and 12 Standard: AMS 4928Q, ASME B348, ASTM F136, and ASTM F67 Surface: Purity when polished: 99.95%-99.999% Point of melting: 1660 C Products Description 1. Uniform composition; 2. Consistent quality; 3. Availability of large-sized. Package and Shipment 1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Product Introduction Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed, and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300 Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Package and Shipment 1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Product name: titanium block, titanium cube, titanium forging Material: Domestic: TA1, TA2, TA3, TA4, TA9, TA10, TC4; American Standard: GR1, GR2, GR3, GR4, GR5, GR7, GR11, GR12, GR23; National standard: GB/T16598-1996 Ti 6Al 4V, Ti-0.2Pd, Ti0.3Mo 0.8Ni, T3AI 2.5V, Ti 6AI 4V ELL American Standard: ASTM B348, ASTM B381, AMS 4928 Specifications Outer diameter 400-700*inner diameter 150-500*height 40-250 Features 1. Anti-pressure; 2. High temperature resistance; 3. Anti-corrosion; 4. Professional customization.
Products Description The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M/MhKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filterï¼? 2. Orifice plate material for gas distribution fluidized bedï¼? 3. Filtration, washing and drying of materials in the pharmaceutical industryï¼? 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace. Note: 1. During the rolling process, the pressure of the rolling mill is very important, which affects the air permeability of the board. Yinggao has the personnel to carry out pressure rolling to ensure the air permeability is qualified. 2. The sintering time in the vacuum sintering process affects the service life of the board, so sufficient and appropriate sintering time is the key process of the sintering process.
Product name: Titanium wire Grade: TAO, TA1, TA2, TA3, TA4, TA5, TA6, TA7, TA9, TA10, TC4, TC6, TC11, GR1, GR2, GR3, GR5 Ti6AL4V ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533 Standard: GB/T3623, ASTM B863, ASTM B348, ASTM F67, ASTM F136 AMS4951-2003 Industrial titanium welding AMS49542003 Ti-6Al-4V alloy wire Specification: A, titanium wire specification: 0.8-6.0mm B. Specifications of titanium wire for glasses: 1.0 6.0mm C. Specifications of titanium wire: 8.0mm (special for hangers) D. Welding wire specification: 2.0mm, 2.5mm, 3.0mm Surface: pickled, bright Features: light weight, corrosion resistance, high strength, good heat resistance, good ductility, non-toxic, non-magnetic, excellent mechanical strength, etc. State: annealed (M), hot-working (R), and cold-working (Y) (annealing, ultrasonic flaw detection) Applications include those for the military, medical, sporting goods, eyewear, jewelry, headwear, electroplating hangers, and other industries.
Product Introduction GR1 Titanium mesh from TopTiTech is produced by weaving pure titanium wire, so it is also called titanium mesh. According to the surface of the raw material, titanium mesh (or titanium wire mesh) can be classified into black and bright varieties. The black titanium mesh is made of pure titanium wire with graphite emulsion coating on the surface, which is suitable for ship filtration and manufacturing seawater filtration titanium mesh. The graphite emulsion coating of GR1 titanium mesh from TopTiTechis removed before weaving pure titanium wire into the net. It is suitable for manufacturing electrode nets, titanium battery current collection nets, and fine chemical liquid filter titanium nets. Product parameters Material: GR1, GR2 Production process: plain weave Filter hole type: square Filtration accuracy: 0.02mm-50mm Width: 5mmâ??3000mm Titanium mesh use: chemical filtration, fuel cell anode titanium current collector, electrolyzer anode mesh Products classification 1. Pure titanium wire Tiâ?¥99.6%, black surface, black titanium mesh is suitable for seawater filtration and other industries where the purity of the solution is not high. 2. High-purity titanium wire: the surface is bright without oxidation layer, and the bright titanium mesh is suitable for manufacturing titanium electrode mesh and chemical titanium filter mesh. What are the advantages about Ti? Titanium has excellent qualities such as light specific gravity, high strength, low temperature resistance and corrosion resistance, and is not easy to oxidize. It has the reputation of strategic metal and the most valuable metal in the 21st century. It is extensively utilized in a variety of industries, including aircraft, shipbuilding, the military, chemical machinery, electric power, seawater desalination, and medical equipment. It has an important position and role in the development of the national economy. It can also be used in high-temperature electric furnace, mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries. Products application Performance and application of titanium mesh: Titanium mesh has good corrosion resistance in acidic and alkaline solutions, and is used to manufacture titanium filter mesh, titanium anode mesh, ion membrane electrolyzer electrode mesh and other products. Titanium mesh has strong corrosion resistance in seawater.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
