Description: Recycle Ic Tray Container
MODEL NUMBER: EAM050503-10
STATUS: 99.9% NEW (ONLY USE ONE TIME)
AVAILABLE QTY: 100K PCS/MONTH
DELIVERY TIME: PARTIAL SHIPMENTS IN ONE MONTHS.
PAYMENT TERM: LC AT SIGHT
Ostrich body skins
Average size: 15.5 sqft
Thickness: 0.8~1.2 mm
Finish type: saddle finished (with dry and smooth touch)
Dye method: aniline dyed
This is the leather distinguished by its tell-tale pattern of quill follicles or feather sockets. Soft to the touch, the leather is both flexible and durable, making it an ideal working material for the manufacture of most leather goods and certain luxury leather items.
Genuine ostrich leather to offer. Leathers are tanned, dyed and finished right in the country of origin, south africa. Skins are finished and can be directly used on leather item manufactures such as handbags, wallets, belts, sofa ect.
South africa is one of the biggest ostrich leather producing country with most experienced skilled on handing the exotic leathers. We offer more than 80 colours for the clients to select. Please feel free to contact us for any enquiry or further assistance.
Ostrich leg skins
Size: around 15*40 cm per piece
Thickness: 0.8~1.2 mm
Finish type: glaze finish (with shine and gloss effect)
Dye method: aniline dye
This is the skins with its broad band of scales down the middle; leg leather resembles reptile skin rather than traditional ostrich leather. Because leg skins yield narrow strips of leather, it is mostly used for small leather items and footwear.
,8203;
High quality genuine ostrich leg skins.
Leathers are tanned and dyed right in the country of origin, south africa, with big colour selection.
Glaze finish is mainly available.
Leathers are suitable for wallet, handbag, shoe and furniture manufacture.
Please contact us for further information.
CC-403 Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and aggregate to produce epoxy mortars of various consistencies. Ideal for : bonding, sealing, priming, coating and grouting. May be used on vertical or horizontal applications as structural epoxy adhesive paste and filler. CC-403 is also used as a primer for Epilox floor coatings and toppings as well as Epilox mortars.
FEATURES AND BENEFITS
100% solids epoxy
Solvent free
Low VOC
High tensile and compressive strength
Bonds to damp concrete
High mechanical strength
Excellent adhesion to most substrates
Cures at temperature down to 5Ã??C
High chemical resistance
Unfilled system
Allows for mortars and grouts to be mixed to any desirable consistency
Typically 3-4 times stronger than typical concrete
Complies with AS4020 potable water
Australian Made
Convenient mix ratio- ( 2 parts Resin- 1 part Hardener ).
DESCRIPTION
CC-200 is a indoor, high fluidity, rapid strength and leveling material.
It still has high bonding,low shrinkage, low water absorption, acid resistance,
alkyl resistance and chemical resistance. It special use for fast repairing, putty and leveling for epoxy coating.
APPLICATION
Floor fixing on parking garage, factory, and warehouse.
Leveling before epoxy coating.
Basic layer for non natural paint.
Bec ause of the early strength and low moisture content, CC 200 has widely application.
Contact out agent when you have doubt on CC 200.
ADVANTAGES
1. Curing and enhancing are fast and rapid below 25 mins.
High strength and low water
absorption/ content could be reached after curing.
2. Good acid and alkyl resistance.
3. Good wear resistance, high compressive strength, leveling and anti cracking.
PREPARE TO USE
1. Clean with vacuum to ensure the surface dustless.
2. Working site is free from dust, sand, oil, and loose.
a). Crack and Joint Treatment
b). File on the crack, open a width of 2 3 cm depth of 1 cm or more groove joints and
clean up dust and loose.
c). At the same time taking CC 200 mortar, filled in and up the crack and sizing 1 2 times
primer after 2 4 hours.
4. Shorter wor king hours to achieve saving time, fast leveling and convenience work.
Description
CP-358W2K is a product which can be painted on rusty iron sheet, iron and other alloy products. Normally, iron products should get the rust removal by sand blast first when they get rusty. Then, they get painted with the anti-rust coating and fireproof paint. If it does not get the rust removal first and directly get painted, the rust will spit out. But, the same situation will not happen if using CP-358W2K.
Features/Advantages
Quick and easy to use.
Fireproof coating.
â?? Hydrophilic.
â?? Water-based.
â?? Non-toxic & smokeless.
Environmentally friendly.
Can be applied well on steel construction body, steel bar, and steel sheet. Does not blister and get damaged when burning.
Rust removal is not required when applying CP-358W2K (unless the rust is thick).
Applications
Can be used in rocket missile or products that high-temperature application is required. Heating pipe.
Iron plate or sheet.
Indoor/outdoor fireproof paint.
Multiple iron materials/fireproof paint.
Plywood, veneer board.
Fire door surface treatment.
PREPARATIONS
The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease,
without laitance and loose particles.
Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water.
MIXING
Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water
based on the condition of stirring and keep stirring around 5 minutes until grouting well.
APPLICATIONS
Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the
stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to
escape. Suggest to blend the grout by auto-mixer for better application.
COVERAGE
25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid
Grouting Mortar.
ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
DESCRIPTION
Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed.
ADVANTAGES
* Easy and ready to use, by water addition only.
* Fast working
* Practical and high adhesive power
* Floor would be flat/ level in a second
APPLICATION
CA-010 is used as a floor screed material surface that canâ??t be exposed and should be
covered with floor material, such as: ceramic, granite, carpet, parquet and other
materials.
Description
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.
Feature
Resistant to UV, exposed sunlight and chemicals
When applied, it forms as seamless membrane without joints
Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius
Use Area
Roof terraces balconies and verandas
Industrial floor coatings
Stadium, car parks
Stones, marble and ce ramic surfaces
Coverage
Consumption of each layer: 0.1-0.15 kg/m2
Minimum two coats should be applied
Total consumption: approx. 0.2-0.3 kg/m2
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if
this time is exceeded
DESCRIPTION
a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling.
After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications.
ADVANTAGE
* Light, good workability and sanding properties.
* No cracks and hair cracks. (depends on background)
* Smooth surface, solid and no powdery.
* Can be painted or finished with wallpaper directly after dry in minimum 24 hours
* without using PVA putty to leveling up & filling uneven rough surface.
PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler : Limestone
3. Color : GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage : 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness
average 7.5m2/25Kg for 2-3mm thickness
6. Thickness : 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life : approx. 60 minutes
SURFACE PREPARATION
* The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
* Porous and absorbent substrates must be pre-wetted prior to application of Starcoat
CN finish coat.
DESCRIPTION
STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains
selected filler and additive used for smooth finishing to uneven wall cement based plaster
and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks,
smooth, no dust on the surface and ready to be painted with water based paint.
Easy to use, good workability and have a long pot life and correction time even at the
outdoor applications.
USES IN APPLICATIONS
*Cement Based Wall Plaster.
*Precast Concrete.
*Concrete Profile & Concrete Ceilings
*Internal & External.
ADVANTAGE
*Light, good workability and sanding properties.
*No cracks and hair cracks. (depends on background)
*Smooth surface, solid and no powdery.
*Can be painted or finished with wallpaper directly after dry in minimum 24 hours without
using PVA putty to leveling up & filling uneven rough surface.
PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler: Limestone
3. Color: GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage: 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness
6. Thickness: 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life: approx. 60 minutes
SURFACE PREPARATION
1. The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.
DESCRIPTION
AS-600 is a high-solid, solvent-based polyurea coating. Itâ??s also formulated with pure aliphatic resin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within one day.
CHARATERISTIC
* Fast drying and fast curing
* Brushable
* Abrasion and mechanical stress resistant
* Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etc)
APPLICATION AREAS
* Warehouse ramps, garages, terraces, parking areas
* Outdoor and indoor stores, industrial shop floors
* Outdoor laundries, gas station, etc..
