Description
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.
Feature
Resistant to UV, exposed sunlight and chemicals
When applied, it forms as seamless membrane without joints
Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius
Use Area
Roof terraces balconies and verandas
Industrial floor coatings
Stadium, car parks
Stones, marble and ce ramic surfaces
Coverage
Consumption of each layer: 0.1-0.15 kg/m2
Minimum two coats should be applied
Total consumption: approx. 0.2-0.3 kg/m2
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if
this time is exceeded
The belt conveyor is a kind of continuous transporting equipment with traction property. The belt conveyor is widely used in coal, mining, metallurgy, ports, building materials, chemical, light industry, oil, transportation and etc. The belt conveyor could be used for transporting bulk, granulous materials. Compared with other conveying equipment, the belt conveyor has many advantages such as long conveying distance, large volume, continuous conveying, reliable running, automation and centralization control. The main components of belt conveyor includes tail pulley(bend pulley), feeding device, upper supporting roller, frame, safety protection device, conveyer belt, driving pulley, dumping device, sweeper, driving device, lower supporting roller, impact idler, tension device and etc. Specification Parameter Width of Belt: 500mm, 650mm, 800mm, 1000mm, 1200mm, 1400mm, 1600mm, 1800mm, 2000mm, 2200mm, 2400mm(Other specification could be made according to the requirements of customers) Speed of belt: 0.8m/s, 1.0m/s, 1.25m/s, 1.6m/s, 2.0m/s, 2.5m/s, 3.15m/s, 4.0m/s and so on. Materials of belt: canvas CC-56, nylon NN100-300, polyester EP100-600, steel wire steel wire and so on. Inclination: 0-15° installed power: 2*500, 3*500, 2*400, 2*315, 2*630 and so on. -
SAFFRO'S aura Premium Gloss Enamel gives smooth,hard & glossy finish.Its dry film has good adhesion to the surface.It has very good flow and brushability. aura Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily RECOMMENDED USE It is applied on furnitures,drums,barrels,household products,elecrical motors,doors,windows and variety of other surfaces which are not subjected to outdoor exposure FINISH :smooth and glossy COLOR As per shade card Including White and Black. COVERING CAPACITY :7 to 9 sq.mt/lit/coat at 30 to 35 micron dry film thickness,depending (ON SMOOTH MILD STEEL SURFACE) upon shades and surface. DRYING TIME :Surface dry - Less than 3 hours. :Hard dry - Less than 15 hours. Second coat application period -After 10 hours Above all properties depend upon temperature and humidity. FLASH POINT :Above 30* C (86 *F) THINNER RECOMMENDED :SAFFRO Synthetic G.P Thinner METHOD OF APPLICATION :By Brush or spray at a pressure of 40 to 50 P.S.I RECOMMENDED PRIMER :For Metal - SAFFRO R/O Z/C metal primer - SAFFRO Zinc Chrome primer yellow For Wood - SAFFRO Wood primer white For Plaster - SAFFRO Cement primer (oil base) DIRECTION FOR USE Remove dust,grease,oil,moisture,rust and other loose flakes etc.After priming the surface with recommenden primer with over night drying & sanding with emery paper,apply SAFFRO SHINE synthetic enamel using recommended thinner.Allow first coat to dry for minimum 10 hours before applying second coat.Stir the content thoroughly prior to use PACKING : 20 Ltr, 10 Ltr,4 Ltr ,1 Ltr, 500 ml,200 ml,100 ml,50 ml.
