Description CP-358W2K is a product which can be painted on rusty iron sheet, iron and other alloy products. Normally, iron products should get the rust removal by sand blast first when they get rusty. Then, they get painted with the anti-rust coating and fireproof paint. If it does not get the rust removal first and directly get painted, the rust will spit out. But, the same situation will not happen if using CP-358W2K. Features/Advantages Quick and easy to use. Fireproof coating. â?? Hydrophilic. â?? Water-based. â?? Non-toxic & smokeless. Environmentally friendly. Can be applied well on steel construction body, steel bar, and steel sheet. Does not blister and get damaged when burning. Rust removal is not required when applying CP-358W2K (unless the rust is thick). Applications Can be used in rocket missile or products that high-temperature application is required. Heating pipe. Iron plate or sheet. Indoor/outdoor fireproof paint. Multiple iron materials/fireproof paint. Plywood, veneer board. Fire door surface treatment.
PREPARATIONS The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease, without laitance and loose particles. Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water. MIXING Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water based on the condition of stirring and keep stirring around 5 minutes until grouting well. APPLICATIONS Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to escape. Suggest to blend the grout by auto-mixer for better application. COVERAGE 25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid Grouting Mortar. ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
DESCRIPTION Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed. ADVANTAGES * Easy and ready to use, by water addition only. * Fast working * Practical and high adhesive power * Floor would be flat/ level in a second APPLICATION CA-010 is used as a floor screed material surface that canâ??t be exposed and should be covered with floor material, such as: ceramic, granite, carpet, parquet and other materials.
Description CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface. Feature Resistant to UV, exposed sunlight and chemicals When applied, it forms as seamless membrane without joints Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius Use Area Roof terraces balconies and verandas Industrial floor coatings Stadium, car parks Stones, marble and ceramic surfaces Coverage Consumption of each layer: 0.1-0.15 kg/m2 Minimum two coats should be applied Total consumption: approx. 0.2-0.3 kg/m2 Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded
DESCRIPTION a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling. After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications. USES IN APPLICATIONS 1. Cement Based Wall Plaster. 2. Concrete Wall, Column & Ceiling 3. Precast Concrete & Concrete profile 4. Internal & External. ADVANTAGE * Light, good workability and sanding properties. * No cracks and hair cracks. (depends on background) * Smooth surface, solid and no powdery. * Can be painted or finished with wallpaper directly after dry in minimum 24 hours * without using PVA putty to leveling up & filling uneven rough surface. PRODUCT SPESIFICATIONS 1. Main Binder : Portland Cement & Polymer 2. Filler : Limestone 3. Color : GREY and WHITE. 4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags. or 28 - 32 % water demands. 5. Coverage : 1.25-1.3 Kg/m2/mm or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness 6. Thickness : 2mm thickness/coat 4mm for 2 coats and 6mm for 3 coats. 7. Pot Life : approx. 60 minutes SURFACE PREPARATION * The substrate must be clean and free from grease and loose particles. Recesses should be pre-patched and levelled where appropriate. * Porous and absorbent substrates must be pre-wetted prior to application of Starcoat CN finish coat.
DESCRIPTION STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains selected filler and additive used for smooth finishing to uneven wall cement based plaster and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks, smooth, no dust on the surface and ready to be painted with water based paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications. USES IN APPLICATIONS *Cement Based Wall Plaster. *Precast Concrete. *Concrete Profile & Concrete Ceilings *Internal & External. ADVANTAGE *Light, good workability and sanding properties. *No cracks and hair cracks. (depends on background) *Smooth surface, solid and no powdery. *Can be painted or finished with wallpaper directly after dry in minimum 24 hours without using PVA putty to leveling up & filling uneven rough surface. PRODUCT SPESIFICATIONS 1. Main Binder : Portland Cement & Polymer 2. Filler: Limestone 3. Color: GREY and WHITE. 4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags. or 28 - 32 % water demands. 5. Coverage: 1.25-1.3 Kg/m2/mm or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness 6. Thickness: 2mm thickness/coat 4mm for 2 coats and 6mm for 3 coats. 7. Pot Life: approx. 60 minutes SURFACE PREPARATION 1. The substrate must be clean and free from grease and loose particles. Recesses should be pre-patched and levelled where appropriate. 2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.
DESCRIPTION AS-600 is a high-solid, solvent-based polyurea coating. Itâ??s also formulated with pure aliphatic resin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within one day. CHARATERISTIC * Fast drying and fast curing * Brushable * Abrasion and mechanical stress resistant * Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etc) APPLICATION AREAS * Warehouse ramps, garages, terraces, parking areas * Outdoor and indoor stores, industrial shop floors * Outdoor laundries, gas station, etc..
Super juicers and versatile electric motors for air conditionery and household appliances.
This mini portable air conditioner can use a battery to be taken outdoor. This portable air cooler can be used also for your pets during summer. You can use portable battery or just charge it via USB. It is very economic as the the electricity that uses is only 2.5 watt. Measurements: 13.1*13.1*17cm Weight: 650 g. It has a water tank of 450ml that can be used for 4-6 hrs. Use battery of bigger than 10,000 mAh.
Introduction : Anti-fog agents RX-12520 is a special hydrophilic nano-emulsion polymer. That prevents the condensation of water in the form of small droplets on a surface which resemble fog. Anti-fog agents RX-12520 could be used in many areas such as glass or plastic surfaces, helmet goggles, lens, and mirror etc. Especially used on the automobile front windshield for to ensure the driving safety during winter season & raining day. Anti-fog agents RX-12520 was compounding by high polymer, so it can be producing a film which exhibited more long time effect than other conventional anti-fog agent. Anti-fog agents RX-12520 is not only a good accessory for driver but also is non-toxic and harmless for human body. Specifications : Composition.... Hydrophilic polymer & surfactant Appearance….translucent liquid Special gravity…1.00 Active content…20% Volume : 100 gram Usage : car glasses, helmet goggles, swimming goggles, eye glasses & mirror etc. Usage guidance : sprayed Anti-fog agent RX-12520 directly on glass, mirror or transparent plastic surface (car windshield/window and helmet goggles are sprayed on the inside) and use a clean cloth to wipe, then you can easily achieve a good anti-fog effect. Precautions : this product can’t spray to eyes. If there is accidentally stained, then must rinse with water immediately.
Item No. - XR500 Battery (MAH) - "3000MAH BYD Lithium- ion battery" Vacuum Duration - 150min "Dust Tank Capacity" - 0.6L Noise - 45db "Weight & Package" - "7kgs/pc 3pcs/ carton 575*490*395mm" Main Features - "Works with Amazon Alexa or Google Assistant 1. Lidar + SLAM Dual Location - 5cm-8m Radar Range - Real-Time Object Detection Scans and Maps the room, plans, and methodically cleans according to Map. 2. Wifi APP Controlled - Real-Time Construction Map 3. Smart Electric-Controlled Water Tank 4. Hand Drawing Virtual Wall on APP 5. Drawing Cleaning Area on APP 6. Map Upload & Storage on APP - Support Multi-floor Map Storage (Max.5) 7. Breakpoint Continuous Cleaning 8. Adjustable Suction Power;Japan NIDEC Brushless Fan 9. Electrical and Mechanical Double Anti-collision Design; 10. Voice Guidance 11. Anti-Winding V shape Floating Roller Brush; 12. Double Filter(Primary and HEPA); 13. Time Schedule Cleaning System; 15. Obstacle Crossing: 18mm 16. In-Mold Decoration (IMD) surface 17. NIDEC Brushless Motor imported from Japan. 18 .EPSON Chip imported from Japan."
Home and garden furniture.
Handmade leather trays, quality bedding products, decorative poly products, stylish stainless home accessories, ceramics for dining products.
Indoor & outdoor furniture of wood and mixed material Tableware, kitchen & bath.
Paper drinking straws.
Glassfiber mats, spray up roving, composite raw materials, carbon fiber fabrics.Import and export services
Giant advertising inflatable.
Screw, special screw, auto screw, screw machine, former machine, washer, nuts, ribbon, gift item, ceramic tiles.
Baby products such as baby walker, stroller, tricycle.
Store fixtures & rack & mannequin.
