South Korean Electric Components Suppliers and Manufacturers

Silicon Carbide Heating ElementDescription Silicon Carbide Heating Element can be installed and replaced while the tin bath is operation. The heaters can be installed through the side-seal, or through the side of the bath roof, and are commonly used to extend campaign lives, where conventional elements in the side zones have been broken, and insufficient power is available. Silicon Carbide Heating Element Advantages High purity raw materials; High structural density; Slow aging; Maximum temperature being up to 1500â?? (2732�°F); Easy to be installed and replaced. Types and Applications of Silicon Carbide Heating Element 1. SW (Standard) SW Silicon Carbides are used in applications ranging in temperature from 600�°C up to 1400�°C in both air and controlled atmospheres. Although the type of atmosphere used will determine the maximum recommended element temperature. This kind of silicon carbide elements can be mounted either vertically or horizontally. 2. U-TYPE U shape Silicon Carbide is consists of two silicon carbide rod with same diameter. Each rod has both hot zone and cold end with identical resistance. Two rods are connected by the low resistance SiC. Also the connector could be used as holder according to different requirements. 3. W-TYPE 3-phase elements are available in 2 different types: SGC (Dumbbell), SGD(Standard). These elements are self-bonded silicon carbide formed by re-crystallization of silicon carbide at high temperature. It consists of three high-purity silicon carbide rods connected at one end by a silicon carbide crossbar. SGC elements are designed for vertical installation in standard float glass bathes and SGD elements for horizontal installation. They can be connected directly on three-phase power supply and is a one-side terminal type which permits drawing out the terminals from the roof of the furnace. 4. Single Spiral Silicon Carbide and Double Spiral Silicon Carbide: They are made from silicon Carbide powder, and have two shapes: single and double sprial silicon carbide heating element. They are widely used in all kinds of kilns and furnaces.

Silicon Carbide Heating Element General Description Silicon carbide heating element is a kind of non-metal high temperature electric heating element. It is made of selected high quality green silicon carbide as main material, which is made into blank, siliconization under high temperature and recrystallized. It is the most popular type of economical heating element capable of operating under hot and rigorous environments. Silicon Carbide Heating Element Features 1. withstands as high as 1600�°C 2. high strength and excellent shock resistance 3. heat source is free of noise and air pollution 4. anti-oxidization, anti- corrosion 5. easy to installation and maintenance Applications of Silicon Carbide Heating Element There are ED, U, W, H, Gun, Single Spiral, Double Spirals, Dumbbel, Door-like types and etc. which are widely used in various high temperature electric furnaces in air, vacuum and other protection gas environments and other electric heating devices, such as industries of magnet, ceramics, powder metallurgy, glass and machinery, etc. Silicon Carbide Heating Elements Complete Specifications 0 Silicon Carbide Heating Elements Complete Specifications 1 Normally the following should be given when describing any type of SiC heating elements: Type: ED, U, W, SC, SCR, DB,G, H, or DM Outside Diameter (OD) : mm Length of Hot Zone (HZ) :mm Length of Cold Zone (CZ) :mm Length of Overall(OL):mm Center Distance (A) :mm Resistance at 105050 Physical property of SIC heating element specific gravity 2628gcm bend strength 300kg hardness 9MOHS tensile strength 150kgcm porosity rate

"Luxfine LCP leakage current prevention device" is a power supply device that prevents leakage current, and electrical devices used by receiving power through this device are safe from leakage current. Leakage current is the current generated by an electrical device outside the normal track, i) the current flowing between the applied live line and the ground, ii) the current flowing between the live line and the neutral line (N), e.g., between the two terminals of the outlet. When a person encounters a conductor of an electrical device, the leakage current flows through the human body and poses a serious threat to the body and life. "Luxfine LCP" allows the human body to safely use electricity by preventing current from flowing even when it encounters the conductor of an electrical device. It allows safe use of electricity even in humid places or when flooded. Existing short circuit breakers are designed to protect the system by operating at leakage currents above 30mA, but the risk of electric shock is always present in sections below 30mA where the short circuit breakers operate normally. In other words, the current between 6 and 30mA also has a significant effect on the body's muscular control and nervous system, leading to secondary accidents or death. Leakage current causes failure, malfunction, life span reduction, fire, etc. of not only the human body but also the electrical equipment used. To prepare for electrical hazards that may occur in the event of a malfunction of a short circuit breaker or in a section below 30mA that is not protected by a short circuit breaker, equipment that can fundamentally block leakage current was developed. The current between the conductor and the ground of the electrical device using this equipment is almost "Zero" amperes. "Luxfine LCP" has built-in functions to drastically reduce the generation of electromagnetic waves that are fatal to the human body and to pre-detect the risk of fire due to aging power lines or de-insulation. In addition, to single-phase 220V, three-phase 380V, products ranging from 300VA to 10kVA are developed as standard models. Commercial and industrial applications with much larger capacity, as well as products with a step-down function of input 220VAC and output 110VAC can be also customized. Applications Places that require a lot of moisture and water, sewage treatment plants, water purification plants, fish farms The expensive old equipment that needs to be overhauled due to leakage current Streetlight pole, signal light pole in areas vulnerable to electric shock or habitually flooded

The electric shock hazard always exists at the section of below 30mA or 100mA where the leakage current breakers operate under normal conditions without any faults. It is believed that the current between 6 to 30mA is also dangerous because the sufferer loses muscular control, and it leads to a secondary accident. It will affect a serious problem of the nervous system also. To prepare for these electric shock risks originated from the malfunction of the equipment and the blow section of 30mA, we have developed the leakage current removal device. This is the world's first product that we can use electricity safely in humid workplaces or even in the water by preventing leakage currents so that we could touch the exposed conductors or case. Not only for the single-phase of 220VCA but the three-phases of 380VAC are developed from 300w to 10kVA, and Industrial application with even greater power consumption products and 110VAC input with 220VAC output products are customized.

This is the world's first developed leakage current prevention device with proven practicality. With this equipment, we can use the electricity safely without worrying about the electric shock where we should use electricity in the water as well as the humid area. This item must be suitable in Japan where there are a lot of natural disasters. These items are made for 220V one phase and 380V three phases can be used in the following applications, and we can develop it for 100V also without any problems. - Food factory - Underground utility tunnels - Underground workshop - Fish farms - Street light poles - Smart farms - Disaster prevention device

Would you please find the attached youtube video for the CE-certified leakage current prevention device? It is the world's first developed leakage current prevention device with proven practicality. With this equipment, we can use the electricity safely without worrying about the electric shock where we should use electricity in the water as well as the humid area. This item must be suitable in Japan where there are a lot of natural disasters. These items are made for 220V one phase and 380V three phases can be used in the following applications, and we can develop it for 100V also without any problems. - Food factory - Underground utility tunnels - Underground workshop - Fish farms - Street light poles - Smart farms - Disaster prevention device Leakage current prevention device Japanese Version. For more information, please do not hesitate to contact me.

Molybdenum Disilicide Heating Elements is used in the furnace temperature from 1300C to 1700C. It is extensively used in the industries of metallurgy glass, ceramic refractory, crystalelectronic device, furnace-manufacture, etc Molybdenum Disilicide Heating Elements Feature 1. High temperature for various electric furnaces. 2. Long life combined with ease of replacing failed elements 3. Can be used continuously or intermittently 4. New and old elements can be connected in series 5. High power concentration may be applied Molybdenum Disilicide Heating Elements Parameters * Shape: I, U, UL, W, WL, Irregular * Diameter: 3/6, 4/9, 6/12, 7/12, 7/14, 9/18, 12/24(mm) * Temperature: 1700�°C, 1750�°C, 1800â?? Material Grade 1600/1700/1800/1850 Shape U, I, W, UL Hot zone length 100-300mm Cold end length 150-300mm Diameter 6-9mm Molybdenum Disilicide Heating Elements Details * The applicable temperature is between 500-1700�°C * Max temperature 1800C * The element cannot be used for rather long time in 400-700

- Acquired an overseas exclusive distribution right of Mando in 2007. - Acquired an recycling parts right of Mandoreman and bluereman. Lot size.

Industrial shock absorber *advantage of adjustable type (upa)1. User can adjust impact absorbed range with dampening adjustable dial(360=½+f) according to impact velocity. 2. Rapid returning piston rod by specially designed spring for next cycle. 3. Surface of outer tube and piston rod plate with chrome that prohibits corrosion and scratchs for a longer life. 4. Available attachment to any position.Max. Impact velocity : less than 3.5 m/sec Ambient temperature : -10~60 c*advantage of non adjustable type1. Non adjustable shock absorber absorbs impact object shock gradually and smoothly. Specially designed with multiple orifices 2. Non adjustable shock absorber makes impact energy exhale to heat energy in a short time 3. Hansung shock absorber made to stop smooth and quiet using a uniquely designed multiple orifice structure when injection mold inject as well as collide against robot with high speed. 4. Max. Impact velocity: less than 4m/sec 5. Ambient temperature: -10~60 c Gift box and carton box

Price of product (USD price or FOB price) - Ask for price Product Origin - South Korea Minimum Order Size and Packaging details - 1 pieces / general export packing

Electrical components.

433MHz Learning Code Swing Door Wireless Receiver Controller Automatic Door System Swing Gate Opener Control Board. 2DPD-010 Swing Gate Controller Swing Gate Control Board with 220V AC pcb circuit boards Feature Real time monitor, Automatical stop against extra resistances, etc Soft start and stop Setting available for single-key control Auto closing function, used with external recog nition device Interface for infrared obstacle detection, loop sensor, single key circulation control, independent key, etc Interface for electric lock Model No.: 2DPD-010 Power supply: AC200V-250V 50HZ/60HZ Transfomer: 220VAC/24VAC Number of motors: 2 DC motors Motor power:

High Quality Electrical Sliding Gate Controller AC200-260V 50/60Hz Motor Sliding Gate Opener Control Board Sliding Gate Controller. Feature Exclusive rolling code encryption remote control Soft start and stop Interfaces available for infrared obstacle detection, warning light, loop sensor, card reader eto Obstacle protection, auto closing, auto locking Model:2DTD-0005 Power Supply: AC200 260V 50 60Hz Output Power: 100W 150W AC Waming Lights: AC220V DC Warning Lights: DC24V -10w Temperature

This item will be shipped to Seoul, Korea. We share the available quantity with a price according to the schedules. 1) 12th on April: 20,000 -> sold out 2) 22nd on April: 20,000 -> Booked (but, there is a possibility of cancellation.) If the buyer will cancel their order, we can give you information by email or whatsapp. unit price: $8/1pcs, Advanced T/T 3)15th on May: 20,000 unit price: $5.5/1pcs, Advanced T/T bank transfer Product data sheet http://file2.dzsc.com/product/18/09/02/1140443_111

1. It has excellent resistance against chemicals 2. It can be used in wide temperature range 3. It is proper to be used for indoor, outdoor or coastal area in harmful enviroment where to be contact with sea water.

-Placing keypad or logo sticker on screw cover type 1. It can be placed keypad or logo sticker on the cover. 2. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal 3. Available 18 kinds sizes from 80x130x35 mm to 180x255x125 mm 4. selectable gray cover or clear cover. 5. Available stainless steel wall mounting bracket.

compatible for nellcor

Alternator 60a 11044424 Characteristics P/n : 11044424 Nsn no : 2920 - 00909 - 2483 Voltage : dc 28 ±0.2v Output current : 60a Speed : 950 ~ 8,000 Amb. Temp. Range : -53.8 ~ 107.2 2.5t & 5t military truck