"Luxfine LCP leakage current prevention device" is a power supply device that prevents leakage current, and electrical devices used by receiving power through this device are safe from leakage current.
Leakage current is the current generated by an electrical device outside the normal track, i) the current flowing between the applied live line and the ground, ii) the current flowing between the live line and the neutral line (N), e.g., between the two terminals of the outlet.
When a person encounters a conductor of an electrical device, the leakage current flows through the human body and poses a serious threat to the body and life. "Luxfine LCP" allows the human body to safely use electricity by preventing current from flowing even when it encounters the conductor of an electrical device. It allows safe use of electricity even in humid places or when flooded.
Existing short circuit breakers are designed to protect the system by operating at leakage currents above 30mA, but the risk of electric shock is always present in sections below 30mA where the short circuit breakers operate normally. In other words, the current between 6 and 30mA also has a significant effect on the body's muscular control and nervous system, leading to secondary accidents or death. Leakage current causes failure, malfunction, life span reduction, fire, etc. of not only the human body but also the electrical equipment used.
To prepare for electrical hazards that may occur in the event of a malfunction of a short circuit breaker or in a section below 30mA that is not protected by a short circuit breaker, equipment that can fundamentally block leakage current was developed. The current between the conductor and the ground of the electrical device using this equipment is almost "Zero" amperes.
"Luxfine LCP" has built-in functions to drastically reduce the generation of electromagnetic waves that are fatal to the human body and to pre-detect the risk of fire due to aging power lines or de-insulation.
In addition, to single-phase 220V, three-phase 380V, products ranging from 300VA to 10kVA are developed as standard models. Commercial and industrial applications with much larger capacity, as well as products with a step-down function of input 220VAC and output 110VAC can be also customized.
Applications
Places that require a lot of moisture and water, sewage treatment plants, water purification plants, fish farms
The expensive old equipment that needs to be overhauled due to leakage current
Streetlight pole, signal light pole in areas vulnerable to electric shock or habitually flooded
The electric shock hazard always exists at the section of below 30mA or 100mA where the leakage current breakers operate under normal conditions without any faults. It is believed that the current between 6 to 30mA is also dangerous because the sufferer loses muscular control, and it leads to a secondary accident. It will affect a serious problem of the nervous system also. To prepare for these electric shock risks originated from the malfunction of the equipment and the blow section of 30mA, we have developed the leakage current removal device. This is the world's first product that we can use electricity safely in humid workplaces or even in the water by preventing leakage currents so that we could touch the exposed conductors or case. Not only for the single-phase of 220VCA but the three-phases of 380VAC are developed from 300w to 10kVA, and Industrial application with even greater power consumption products and 110VAC input with 220VAC output products are customized.
This is the world's first developed leakage current prevention device with proven practicality. With this equipment, we can use the electricity safely without worrying about the electric shock where we should use electricity in the water as well as the humid area. This item must be suitable in Japan where there are a lot of natural disasters. These items are made for 220V one phase and 380V three phases can be used in the following applications, and we can develop it for 100V also without any problems. - Food factory - Underground utility tunnels - Underground workshop - Fish farms - Street light poles - Smart farms - Disaster prevention device
Would you please find the attached youtube video for the CE-certified leakage current prevention device? It is the world's first developed leakage current prevention device with proven practicality. With this equipment, we can use the electricity safely without worrying about the electric shock where we should use electricity in the water as well as the humid area. This item must be suitable in Japan where there are a lot of natural disasters. These items are made for 220V one phase and 380V three phases can be used in the following applications, and we can develop it for 100V also without any problems. - Food factory - Underground utility tunnels - Underground workshop - Fish farms - Street light poles - Smart farms - Disaster prevention device Leakage current prevention device Japanese Version. For more information, please do not hesitate to contact me.
80% High Color Rendering Index Perfect Thermal Control with One body Diecasting Aluminum Housing Ultra-slim and light solution Adopting a temperd glass preventing from external shock High reliability with internal SMPS or AC direct drive IC Perfect solutions for wall washer, parking lot, tunnel light and high mast lights
LED streetlight, wind turbine, hybrid solar streetlight, solar streetlight, Winglet structure with the tip bent inward Innovative material-EPP(Expanded Polypropylene) blade with an aluminium frame inside New Technology to store and re-use wind Maximum efficiency with greater blades From 30 to 60W LED streetlight
Highly Efficient Products of 170lm/W (Separate Converter type) with elegant design. It looks great anywhere. (120~130lm/W Driverless type) With Max 20kV Power Surge protection device preventing the damage originated from the indirect surge and the inductive switching surge. Thermally stable aluminum stamping and diecasting structure and ultralight design to minimize the risk of falling loads. Adopting RF wireless dimming controller for remote on/off and the predetermined dimming with LTE communication (Option) By adopting the AC drive IC, a simplified and reliable circuit system has been ensured. (Driverless type) Not using the transformer and the electrolytic capacitors, the necessity of using the other components for modification of the PF, THD, and EMI has been fundamentally excluded. (Driverless type) With the perfect waterproof design and the AC drive IC, it can be applied for the refrigeration warehouse less than -30C as well as hazardous area lightings. (Option) By the internal PWM control, PIR sensing and dimming is also possible. (Option)
Performs ultra-high efficiency Winglet shaped blades Innovative blade with Styrofoam material New technology to store and re-use wind Performs higher efficiency with extended blades From 3Kw to 15Kw Integrated with Solar Module as per requirement
Flexible fireproof cables are composed of copper stranded wires, mineral compound insulation, and mineral compound sheaths. This kind of cable has non-combustible, smoke-free, non-toxic and fire-resistant characteristics. The structure of the flexible mineral insulated cable adopts a flexible structure and materials that are made of mineral compounds, which make up for the defects of hard structure, flammability, and toxicity. It also has some advantages that other cables cannot have, such as: fire resistance, large current carrying capacity, Impact voltage resistance, mechanical damage resistance, halogen-free, non-toxic, explosion-proof, waterproof, corrosion resistance, long life, safety, overload resistance, high temperature resistance, low cost, etc. Flexible fireproof cables have an important role in protecting lives, materials, and information security. They are used in trunk lines, fire lines, escape rescue systems, such as emergency lighting, fire monitoring, alarm systems, elevator systems, smoke exhaust systems, and control lines, etc. Flexible fireproof fireproof cables used in trunk lines, fire lines, escape and rescue systems, such as emergency lighting, fire monitoring, alarm system, elevator system, smoke exhaust system, and control lines, etc. Flexible fireproof fireproof cables used in Public buildings: high-rise buildings, underground buildings, hotels and restaurants, hospitals, schools, business centers, government affairs centers, department stores, large supermarkets, logistics warehouses, financial institutions such as banks, securities and insurance, post and telecommunications centers, power control rooms, substation rooms, museums, memorials and other historic buildings. Flexible fireproof fireproof cables used in Infrastructure: airport terminals, stations, hub centers, ports, subway systems, Bridges, tunnels. Flexible fireproof fireproof cables used in Industry: coal mining, coal chemical industry, oil field mining, petrochemical industry, oil refinery, metallurgical industry, iron and steel industry, shipbuilding industry, aerospace, electric power industry, pharmaceutical industry, glass industry, paper industry, military system. Flexible fireproof fireproof cables used in Fire prevention, explosion prevention, high temperature places: oil depot and gas station, natural gas transmission and compression station, garden landscape, historic sites, wood structure buildings
The special explosion-proof cable is composed of conductor, insulation, high-strength braided explosion-proof reinforcement layer, explosion-proof armor layer and antistatic outer sheath. According to the different needs of customers, the insulation layer is divided into inorganic mineral insulation, rubber insulation and plastic insulation. Under the protection of the explosion-proof reinforced layer and explosion-proof armor, the special explosion-proof cable can withstand the destructive force of 55 kg of TNT explosives within a certain distance. At the same time, the anti-static outer sheath can effectively guide the static electricity generated by the friction between the cable and the non-insulator, prevent the fire, explosion and other safety accidents caused by static electricity in military facilities, and perfectly solve the technical problem that the "cable static bundle" is easy to detonate. The special explosion-proof cable also solves the current national defense combat readiness facilities, such as ammunition depots, hangars, military ports, caverns, military and civilian airports, tunnels, military exercise bases, large-scale power, chemical, coal, subway hazardous chemical wharf and other electrical equipment facilities Safety issues of explosion-proof system or unit power transmission. Inorganic mineral insulated explosion-proof cables also have: low-smoke, halogen-free, flame-retardant, low-toxicity, fire-proof and other combustion characteristics, and have passed the most demanding C, W, Z and BS8491 fire tests in the British BS6387. At the same time, the cable has good flexibility, Features such as strong compression resistance and long manufacturing length. Special explosion-proof cable is suitable for ammunition depots, hangars, military ports, caverns, military and civil airports, tunnels, military exercise bases, large electric power, chemical, coal mine, subway dangerous wharves