LAYER - Double side Application For semiconductor inspection Thickness - 0.07 T Drill Min - 0.3 mm Inspection spec - Zero defect SPECIAL item for controlling - Hole tolerance [+-0.01] SPECIAL item for controlling - Space between line [+-0.02]
LAYER - 6Layer (FLEXIBLE 2layer+RIGID 4layer) 6-2-6 Application Inspection equipment of Semiconductor Thickness - 0.5T Structure - 1-2LBVH ,2-3L BVH 1-4 STACK BVH , 4-6BVH , 56BVH Machine Drill Min. 0.25mm Cu Plating VIA FILL + PTH BGA(LAND/PITCH) - 0.3mm / 0.4pitch PSR GREEN Surface treatment ENIG
LAYER 4layer (FLEXIBLE 2layer+RIGID 2layer) 4-2-4 Application Industrial Equipment Thickness 1.2T Structure 1-4L DRILL Machine Drill Min. 0.25mm Cu Plating Min. 25 / NORMAL PALTING L/S 100 / 100 PSR GREEN Surface treatment ELECTRO HARD GOLD + ENIG
LAYER 2layer [FLEXIBLE 1layer + RIGID 1layer] 2-1-2 Application Industrial Equipment Thickness 1.6T Machine Drill Min. 0.25mm Cu Plating HOLE Min. 20 L/S 400 / 100 PSR / COV BLUE / BLACK Surface treatment ENIG Impedance LAYER 1L Impeance spec 100
LAYER 10LAYER [FLEXIBLE 4L + RIGID 6L] 10-4-10 Application GPS Thickness 1.6T Machine Drill Min. 0.2mm Laser Drill BVH Min. 0.1mm Cu Plating HOLE Min. 25 L/S 100/100 PSR GREEN Surface treatment ENEPIG, ENIG Impedance LAYER 1L, 4L, 8L, 10L Impedance spec 50 / 100
PIXEL 8M 13M 16M 20M Flatness & Tilt Special :30 Thickness 0.25T ~ 0.45T Structure 2-3L DRILL, 1-2L, 3-4L BLIND VIA Machine Drill Min. 0.15mm Laser Drill BVH Min. 0.10mm Cu Plating 18[+-3] / PTH or Via Fill BGA PITCH 0.4mm Under LAYER Rigid Flexible 4LAYER [4-2-4] / [4-2-2] PSR BLACK , BLUE , GREEN Surface treatment ENEPIG Stiffner PI , SUS Other EMI Impedance 100
LAYER FPCB S/S Application Medical equipment Thickness 0.06T L/S 50/50 DRILL/LAND 200/400 Inspection spec Zero defect on circuit SPECIAL item for controlling Stair-shape at inner circuit
This machine is Finishing machine the product as a high-speed centrifugal input, separating transport, washing, drying is capable of automatic line. Four of the six boxes, each barrel TURRET (tumblers), which is attached to the alternate startup TURRET allows you to reverse direction. Section barrel parts, Grinding Stone, water and fixed if TURRET objects in a box by the centrifugal force of the barrel inside the box, get to live a life of intense pressure of work.
- Convenient voice alarm recording and response set - Multiple transmission and centralized control - Various user settings - Wide range of input voltage - Auxiliary battery connection for emergency
Compact size and unibody type Excellent EMI/EMC and noise properties Embedded ASIC for high accuracy Wide range(-40 to 100°C) DIN and cable type Perfect compatibility with dotech's air compressor controllers
Product Features: Low vibration, low noise design Semi-automatic system High speed / bulk dry Excellent abrasion resistance Labor cost savings
Efficient step control Multi/semi-multiple control CDU control Intelligent rotation Low/high pressure alarm Sensor calibration Sensor error detection
UA Type ZA or simple selection device built into the machine after completing a finishing damper selection promoted by a network of parts-off wheel and come up and finishing stone selection operation is done go back into the interior parts of the tank is vented to the outside.
Polishing machine using centrifugal force. Attach the barrel at high speed rotor to rotate and the barrel of the centrifugal force caused by constantly rotating the workpiece and the abrasive employed in barrel Joan mixed together, while maintaining the shape of the orbit and rotation causes the flow of rain to polishing. Features High-speed grinding, semi-product input / selection available, mass production and labor-saving, JOG operation by the barrel Box location, electronic brake installation
1.GAP in the Finishing-Stone, Part sculpture does not pinch PUMP between GAP has been dismissed by the water and the water frozen OVER-FLOW HOLE in the top of the wall through the machines installed in the lower three-sedimentation-filtration tank is vented to precipitate was filtered again PUMP The water is put through by the GAP. GAP and GAP problems that occur in this way also significantly reduced wear. 2.GAP Finishing-Stone, or the angle it does not pinch the part was manufactured. 3.Despite improvements such as more, GAP If there is a wear and tear on, GAP and many times without changing the adjustment has been designed to be used. 4.Hydraulic CYLINDER used, the compressed air can be used alone without the electric. 5.Injection and exhaust products to happen on one direction, it is convenient to the worker.
Led aviation obstruction lights, aviation led lights, led obstruction lights.
This machine is a centrifugal force, using the high-speed Finishing machine.Four of the six boxes, each barrel TURRET (tumblers), which is attached to the alternate startup TURRET allows you to reverse direction. Section barrel parts, Grinding Stone, water and fixed if TURRET objects in a box by the centrifugal force of the barrel inside the box, get to live a life of intense pressure of work.
This machine is a centrifugal force, using the high-speed Finishing machine.Four of the six boxes, each barrel TURRET (tumblers), which is attached to the alternate startup TURRET allows you to reverse direction. Section barrel parts, Grinding Stone, water and fixed if TURRET objects in a box by the centrifugal force of the barrel inside the box, get to live a life of intense pressure of work. Mini Finishing machine, and the flavors of HZ4/12/30 barrel shape of the box type table"Vertical Type- 0Horizontal type" Mainly divided into small parts and are suitable for.
The Finishing-machine Polishing tank with a fixed wall and the bottom half is comprised of the rotation and the bottom half of the rotation while rotating parts by centrifugal force and secure the wall-off wheel to push strongly naemyeo incurred on fixed-wall back-off wheel and rotating parts in half fixed back wall pushes back on the materials. Polishing-stone in the process of vortex formation, and parts and rubbing each other by strong cutting force occurs to me, or gloss. Despite these advantages, this machine is something they have not been widespread, in the GAP between the fixed wall and the crank-off wheel is no debris or parts stuck Many times, if a machine fails, the GAP is easy to wear, such as PU Lining Replacement, A / S in the because there were problems. However, we fully resolve these problems, the machine is a revolutionary machine. 1.Polishing-stone pieces or parts to GAP does not pinch, GAP between Pump is dismissed by the water, and water retention OVER-FLOW HOLE in the top of the wall through the machines installed in the lower three-sedimentation-filtration-tank emissions , and precipitation-water is filtered again by the Pump will be put through GAP. In this way, the actual results of using the GAP that occur in this problem did not occur, GAP was gonna wear significantly. 2. The angle of GAP Polishing-stone, or parts have been manufactured so that it caught. 3. Despite improvements such as more, GAP If there is a wear and tear on, GAP and many times without changing the adjustment has been designed to be used. 4. Hydraulic Cylinder used, the compressed air can be used alone without the electric.
The Finishing-machine Polishing tank with a fixed wall and the bottom half is comprised of the rotation and the bottom half of the rotation while rotating parts by centrifugal force and secure the wall-off wheel to push strongly naemyeo incurred on fixed-wall back-off wheel and rotating parts in half fixed back wall pushes back on the materials. Polishing-stone in the process of vortex formation, and parts and rubbing each other by strong cutting force occurs to me, or gloss. Despite these advantages, this machine is something they have not been widespread, in the GAP between the fixed wall and the crank-off wheel is no debris or parts stuck Many times, if a machine fails, the GAP is easy to wear, such as PU Lining Replacement, A / S in the because there were problems. However, we fully resolve these problems, the machine is a revolutionary machine.
